Pulley Restoration | Is That Poop??

Рет қаралды 259,262

Жыл бұрын

The old rusty pulley from an old barn does not have many parts, so disassembly was straightforward. In this project I have had to make several bolts new on the lathe, welding, paint spreading, sandblasting, grinding and then some. Please also note that this video is not just to quickly show someone how something works, but also to relax and unwind from the daily grind!
------------------------------------------------------------
▶ What did I do ?! ◀
To disassemble the antique idler pulley it was enough to pull two bolts and disassemble the plain bearing to hold all the parts in my hand. After washing them off in water, I sandblasted all the parts in the sandblasting cabinet. After removing burrs and imperfections, the major components could be painted with rust preventative paint. The bolt, on the old pulley had to be replaced because the old one had too much play in the fit. The bracket, including the bolt that holds the idler pulley, also had to be rebuilt. After all parts were reassembled, the bolt could be filled with grease. As a small detail, the letters were colored to match the pulley.
------------------------------------------------------------
▶ Good to know ◀
I used the following tools: Water pump pliers, pin punch, hammer, dishwasher liquid, brush, screwdriver, wire brush, compressor, sandblasting cabinet, abrasive corundum, key file, metal rust preventive paint, paint brush, lathe, lathe chisel, center drill, drill, cordless screwdriver, saw, tap, center punch, caliper, countersink, polishing machine, polishing paste, multifunctional tool, scriber, parallel scriber, stop angle, angle grinder, welding machine, welding helmet, adhesive tape, lubricating grease
------------------------------------------------------------
▶ Special thanks to my channel members! ◀
-
------------------------------------------------------------
▶ Do you want to support me? ◀
Do you want to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you saw and you want to help the channel to develop? If you want to support me, you can donate via Paypal:
www.paypal.com/donate?hosted_...
------------------------------------------------------------
▶ Did you like it? ◀
Did you like the video?
Then like, subscribe and share it, please!
Thanks a lot!

Пікірлер: 264

@TheGelasiaBlythe Жыл бұрын

Turtle's digusted face while looking at the old grease was just classic! The pulley came out wonderfully, and now i am thinking of Hogan's Heroes (Hochstetter). 😊 Such a wonderful job on the old pulley. I hope it has many good years left.

@ForgottenShineRestoration Жыл бұрын

Thank you very much! 😁🐢

@Fruity_lexia Жыл бұрын

My mind went to Major Hochstetter too!

@davesmith5656 Жыл бұрын

I like the way he bring the turtle's unique talents into the process. That's the way to treat a valued employee. I just hope he's paying into the social security plan and medicare and is providing for the turtle's old age.

@TheGelasiaBlythe Жыл бұрын

@@davesmith5656 yes, Turtle deserves care in her old age. I think she will never have to worry, though.

@geneard639 Жыл бұрын

Not poop, but it may have been a pulley wheel with either a leather or rubber bedding to make the wheel less noisey.

@Dave_en Жыл бұрын

I think its leather or rubber gasket for smooth noise free operation. It's purpose may be to prevent wearing off the pulley and its replaceable component. The leather rotted and appeared to be poop.😂😂😂

@Luke_ruok Жыл бұрын

I really admire your professionalism, care and persistence. I especially like your humorous style.

@ForgottenShineRestoration Жыл бұрын

Thank you very much for your great comment! 🤩 🐢

@xRavensclaw Жыл бұрын

I love the camera filter you used to show the welding! It was neat being able to see more of the welding process up close.

@ForgottenShineRestoration Жыл бұрын

Thank you! 🐢

@Timknight1946 Жыл бұрын

It’s not really a restoration, it’s more a rebuild. Loved the workmanship as usual.

@piperatthegatesofdawn 10 ай бұрын

Who cares? Bet you're a blast at parties

@theq86 Жыл бұрын

I always loved when turtle popped up here and there, but I wasn't much of a fan of his new face in the newer videos until he saw that old grease. You've won me over. Great restoration as always.

@ForgottenShineRestoration Жыл бұрын

🤣👍🐢

@garymucher4082 Жыл бұрын

Nice save of that pulley system. And the colors look good too. One suggest, if you have the space, install a backup washer before installing the cotter pins. That way if, or when, the cotter pins spin, it won't scratch up the finish. Thumbs Up!

@ForgottenShineRestoration Жыл бұрын

That's right, thanks for the tip! 🐢

@KingYang05 Жыл бұрын

I’m glad Mr. Turtle understood the importance of wearing PPE.

@ForgottenShineRestoration Жыл бұрын

🤣🤣👍🐢

@jacquelinelayne7702 11 ай бұрын

So glad you gave turtle a welding helmet looks good on him.😊

@ForgottenShineRestoration 11 ай бұрын

🤣🤣🐢

@user-mr6jy4xb3l Жыл бұрын

I tried alot but didn't found any other restoration youtube channel better than this. You are great

@ForgottenShineRestoration Жыл бұрын

😳🤩 Thank you so much! 🐢

@yithanong7593 Жыл бұрын

Should have had a demonstration of using the pulley.

@araidea2771 Жыл бұрын

Always love watching your videos. Especially after a long day of work ill just watch vid after vid cuz i find them so relaxing ill even doze off.

@ForgottenShineRestoration Жыл бұрын

Thank you 🤩💪🐢

@ameliamosquera2169 Жыл бұрын

Love the restoration. Ever thought of giving the Lil Turtle a "Spa" day?. He works hard and deserves a shell buff no? Especially after cleaning that S#!T LMAO Great job!

@ForgottenShineRestoration Жыл бұрын

🤣🤣👍 Thank you! 🐢

@777MasterHero Жыл бұрын

I have two theories as to what that stuff caked in the pulley was: 1. It's manure/dirt from lying on a barn floor for many years 2. It's the disintegrated remains of the rope that use to go around it

@ForgottenShineRestoration Жыл бұрын

I suspect the rope was pulled on the floor (full of poo) and then transported into the pulley...🐢

@vathraq2727 Жыл бұрын

I see a similar effect in my work. The pulley starts making noise. They put a lubricant. In this case probably grease. The grease, because it's wet, gathers dirt and dust particles causing it to cake up and dry. Then you have scrape it off to clean the pulley.

@JDB-XIVII Жыл бұрын

Those colors together… WOW!!! Congrats!

@ForgottenShineRestoration Жыл бұрын

Thank you! 🐢

@heathermonks9830 Жыл бұрын

I love the turtle so much 🥺

@ForgottenShineRestoration Жыл бұрын

😍🐢

@kumar_ankit28 Жыл бұрын

That's not a poop IMO. It must be some rubber type thing over a pulley so that the rope is easily pulled without being friction with frame. Rope gets a grip and pull things easily. BDW Amazing work.

@ForgottenShineRestoration Жыл бұрын

This was not rubber. It was poop or mud with straw...🐢

@kumar_ankit28 Жыл бұрын

@@ForgottenShineRestoration oh, my bad 😬

@mehere8299 Жыл бұрын

@@ForgottenShineRestoration It might have been asbestos.

@aLuCiNoGeN Жыл бұрын

I love that turtle 😍😍😍

@ForgottenShineRestoration Жыл бұрын

😍🐢

@jkkbruno Жыл бұрын

the professionalism of the unreal guy, congratulations on your work, I admire you a lot ❤❤🎉

@ForgottenShineRestoration Жыл бұрын

Thank you very much! 🤗🐢

@Shae_Sandybanks 4 ай бұрын

Lol I love your turtle brush 😂

@ForgottenShineRestoration 4 ай бұрын

🐢👑❤

@terryrogers1025 5 ай бұрын

Excellent job sir, like the color combinations you picked out, haven’t seen a greasing application like that in years. Thanks for the video.

@ForgottenShineRestoration 5 ай бұрын

Thanks! 🐢

@user-gv4tn9nb7f Жыл бұрын

So beautiful indeed! Thank you 🙏🏼

@ForgottenShineRestoration Жыл бұрын

Thank you so much! 🐢

@Spicii9896 Жыл бұрын

I can't believe how well it came apart, sure there were a few times a punch was needed hut for the most part it seemed relatively easy compared to it's condition and how it looked. Great restoration :)

@Spicii9896 Жыл бұрын

By the way, I think you should post longer format videos, you obviously work very hard at this and I think more of your work and time should be included, I'd happily watch a 30 minute video of this, you're so skilled

@ForgottenShineRestoration Жыл бұрын

wow, thank you for your great Feedback! 🤩 🐢

@Howiehamster Жыл бұрын

I found a easy way to paint raised letters a pice of cloth over a cork from a bottle put the cloth over the cork put paint on the cloth and just dab on the letters I used to do head stones for a living painting the letters so much easier. Hope this helps you out.

@ForgottenShineRestoration Жыл бұрын

Oh thats a helpful tip! thank you very much! 🐢

@Howiehamster Жыл бұрын

@@ForgottenShineRestoration hay you so very welcome and I love what you do keep up the great work and I am from the uk and your the first person who has got back to me for giving tips thank you so very much

@MASI_forging Жыл бұрын

Amazing job. It looks so good after renovation. 👍👍

@ForgottenShineRestoration Жыл бұрын

Thanks a lot! 🐢

@peterbond7357 Жыл бұрын

Ich als Schweißer musste mir kurz die Augen zu halten 🙈🤭 Kein Phase und falsche Einstellungen bzw zu langsam geschoben beim Schweißen. Trotzallem machst du gute Arbeit. Mach weiter so 👍🏼🙋🏼‍♂️

@lyncolnmc1732 Жыл бұрын

Amazing restoration, you always put so much effort in and it results in a great end product!

@ForgottenShineRestoration Жыл бұрын

Thank you very much! 🤩 🐢

@JoBeth-os1vd 2 ай бұрын

What a Gifted Person!!

@user-fe8iv6el6i 5 ай бұрын

We used these in the Army. Lol. Snatch boxes....😂

@ForgottenShineRestoration 5 ай бұрын

😅👍🐢

@lenux21 4 ай бұрын

When welding taps like that you should bevel the ends so u get a stronger weld connection and penetration

@nicolasfiore Жыл бұрын

The welding part was lovely edited! congrats!!

@ForgottenShineRestoration Жыл бұрын

Thank you very much! 🤩 🐢

@stranger7810 9 ай бұрын

that turtle has literally seen everything after this video 😂😂😂

@1954JDR Жыл бұрын

That pulley was once covered by a cow patty. This is a beautiful restoration.

@ForgottenShineRestoration Жыл бұрын

🤣🤣🐢

@Whitebrowpriest 11 ай бұрын

Hi, I'm just curious as to why you hand paint the items as opposed to using spray paint? It is an environmental consideration? You know, because of the aerosol emissions from spray paint? Thanks for your answer in advance. 🙂

@Tranzisto 11 ай бұрын

Oh come on, all this great workmanship and not showing us this thing doung even a single rotation. Talk about blue balls

@PerfectRestore Жыл бұрын

Great video! I recommend everyone to watch and enjoy the spectacle!!! Good luck, bro!!!

@ForgottenShineRestoration Жыл бұрын

Thank you! 🐢

@mskayla7747 Жыл бұрын

Nicely done! 👍

@ForgottenShineRestoration Жыл бұрын

Thank you! 🐢

@Onur19O7 Жыл бұрын

Thanks for the updated content. 🙂👍🇹🇷

@lucieleimbach Жыл бұрын

I’m glad turtle had more of a part in this video. 🐢😊

@ForgottenShineRestoration Жыл бұрын

🤩🐢

@frick566 Жыл бұрын

Excellent restoration!!

@ForgottenShineRestoration Жыл бұрын

Thank you very much! 🐢

@sagewas3491 Жыл бұрын

3:05 Staufferbüchse 🥰🥰👍🏻👍🏻

@andrzejporeda7281 Жыл бұрын

Bardzo świetna jest zrobiona ta robota pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍

@ForgottenShineRestoration Жыл бұрын

Dziękuję bardzo! 🐢

@AyazRestoration Жыл бұрын

Great Work Bro well done❤😇

@ForgottenShineRestoration Жыл бұрын

Thank you very much! 🤩 🐢

@strimmerguy Жыл бұрын

Good video as always!

@ForgottenShineRestoration Жыл бұрын

Thanks a lot! 🐢

@TundeEszlari Жыл бұрын

Brilliant video.

@ForgottenShineRestoration Жыл бұрын

Thank you very much! 🐢

@CL-we8tn Жыл бұрын

Stunning restoration, more like creation, lol, so glad to see turtle again.

@ForgottenShineRestoration Жыл бұрын

wow, thank you for your great comment! 😁🐢

@fairwayeichhorn9930 7 ай бұрын

Beautiful work! And I love turtles welding helmet!

@ForgottenShineRestoration 7 ай бұрын

Thank you very much! 🐢 🤣👍

@PZLRESTORATION Жыл бұрын

Good job. Congratulations 👏👏👏

@ForgottenShineRestoration Жыл бұрын

Thank you! 🐢

@oneshotme Жыл бұрын

Excellent restoration and a wonderful job restoring it also!!!! Enjoyed your video and I gave it a Thumbs Up

@ForgottenShineRestoration Жыл бұрын

Thank you very much! 🤩 🐢

@oneshotme Жыл бұрын

@@ForgottenShineRestoration You're very welcome!!

@MarkuzZz5 Жыл бұрын

nice welding effect

@ForgottenShineRestoration Жыл бұрын

Thank you! 🤩👍🐢

@christopherdunn7688 Ай бұрын

I would rather you restore items, yes old stuff gets wore out and loose. We love your videos and don't expect every item you do to work even better than it did when it was first made.

@staceysarian7444 Жыл бұрын

Nicely done

@ForgottenShineRestoration Жыл бұрын

Thank you very much! 🤩 🐢

@Barych933 Жыл бұрын

Great job👌

@ForgottenShineRestoration Жыл бұрын

Thank you very much! 🤩 🐢

@Urantia-1411 Жыл бұрын

Seus vídeos além de ser interessante é também divertido, me diverti muito com a tartaruga, parabéns

@ForgottenShineRestoration Жыл бұрын

Muito obrigado pelo seu excelente comentário! 🐢🤗

@isaacpattie6023 Жыл бұрын

Turtles face when the lid dropped and made a mess was my reaction too

@ForgottenShineRestoration Жыл бұрын

🤣🤣🐢

@michaelmiles9840 Жыл бұрын

You have super cool outcomes and always looks fantastic but........the turtle brush thing is one of the creepiest things I've ever seen.

@ForgottenShineRestoration Жыл бұрын

😱😱🐢

@thomasliesch412 4 ай бұрын

Danke sehr schön das Video! Weil auch eine "Deutsche" Erklärung dabei ist! 😀👍

@ForgottenShineRestoration 4 ай бұрын

Danke für das Lob! 🐢

@carrestore Жыл бұрын

good job Beautiful Restoration 👍

@ForgottenShineRestoration Жыл бұрын

Thanks a lot! 🐢

@navy5025 Жыл бұрын

keep going you’re the best❤

@ForgottenShineRestoration Жыл бұрын

Thank you so much! 🐢

@flaviakoch7378 Жыл бұрын

I said that it was a bicycle😂😂😂. Turtle always safe!

@transport_restoration Жыл бұрын

So nice as usual🎉

@ForgottenShineRestoration Жыл бұрын

Thank you! 🐢

@noodletribunal9793 Жыл бұрын

i completely forgot that turtle was a brush lol. hes also more expressive nowadays!(omg his welding helmet)

@ForgottenShineRestoration Жыл бұрын

🤣🤣🐢

@user-sx8pf1gu9o 5 ай бұрын

Уважаю таких людей в ихних руках из мусора привращается в шедевр што не стидно в руки взять и показать друзьям товарищам воо.ще в ассовое обозрение ,оно стоит того ,можно смело дописать "отресставриравано с любововью!"

@selmamariasantos4775 Жыл бұрын

Lindo trabalho parabéns 🎉❤

@ForgottenShineRestoration Жыл бұрын

Muito obrigado! 🐢

@raginald7mars408 Жыл бұрын

This is the pre Historic CPU Fan Cooler from a mega Lithic Stone Computer

@ForgottenShineRestoration Жыл бұрын

🤣🤣🐢

@raginald7mars408 Жыл бұрын

@@ForgottenShineRestoration minimum 4 Million $$$$ never sell it for Future Archaeologists

@vinceianni4026 Жыл бұрын

Hello mister beautiful restoration good job

@ForgottenShineRestoration Жыл бұрын

Hello 🤗🐢

@sugarsammy7209 Жыл бұрын

I loved how you showed us the welds!

@Schlitzauge89 5 ай бұрын

Good Job, auch wenn ich eher Fan davon mehr der Originalteile zu erhalten. Gerade wenn man Schweiß-, Dreh- und Schleifmöglichkeiten hat. Diese beiden Bolzen (oder Schrauben wie hier jemand meint), hätte man auch so nochmal gerade richten, eventuelle Risse schweißen und mittels Drehschleifung auf Hochglanz bringen können, anstatt die Teile komplett neu zu machen (auch wenn das Ergebnis natürlich gut ist). Für diverse Unebenheiten wäre spachteln eventuell nochmal gut gewesen. Hinter eventuell sprühen, wobei ich Pulverbeschichtung persönlich noch schöner finde. Ansonsten immer wieder schön sowas zu sehen. 👍🏿

@RakRescue 10 ай бұрын

Thank the lord Turtle was there to help you

@jurgenk.4780 Жыл бұрын

Nice restauration

@ForgottenShineRestoration Жыл бұрын

Thank you! 🐢

@Saludab Жыл бұрын

Impresionante!!!😮

@ForgottenShineRestoration Жыл бұрын

Thank you! 🐢

@rebekkaholsten4622 Жыл бұрын

Aaah! Ne Umlenkrolle war das! Die ist ja schon ganz schön massiv! Und juhu, der Sandstrahler 👍 ich liebe das. Und ohne Schildkröte geht ja mal nix 😉 wie viel Arbeitszeit ist da reingewandert? Das Ergebnis kann sich auf jeden Fall sehen lassen, das steht mal fest!

@ForgottenShineRestoration Жыл бұрын

Vielen Dank! In dieses Projekt ist nicht sehr viel Zeit reingeflossen, weil ja der Umbau der Werkstatt immer noch mit zu machen ist 😅🐢

@The42Joker Жыл бұрын

I loved your welding effect. I don't know if that was a filer, or an after the fact digital edit, but it was the first time I have seen it, and I REALLY liked it! Great job as always!

@ForgottenShineRestoration Жыл бұрын

Thank you very much! 🤩🐢

@marinamachado4442 Жыл бұрын

Sensacional 😍

@ForgottenShineRestoration Жыл бұрын

Muito obrigado! 🐢

@garyostrander2507 5 ай бұрын

WOW = That is some kind of pulley I would love 2 have = SO COOL👍👍 ❤

@dannyhenson3141 Жыл бұрын

That turned out very nice. I really like the colors

@ForgottenShineRestoration Жыл бұрын

Thanks a lot! 🐢

@MuscoviteDN Жыл бұрын

Perfect

@ForgottenShineRestoration Жыл бұрын

Thank you! 🐢

@re-fix9678 Жыл бұрын

good

@fayellaf Жыл бұрын

What on earth did Mr turtle do to you to deserve such harsh treatment??? I demand you return him to his bed of silk sheets and provide snacks of his choice.

@ForgottenShineRestoration Жыл бұрын

😳😱🐢 You're right, I'll go apologize to turtle

@decoder6379 4 ай бұрын

Супер.❤ Просто шикарно!

@ForgottenShineRestoration 4 ай бұрын

Большое спасибо за ваш приятный комментарий! 🐢

@user-lp4yb3qt1t 4 ай бұрын

Vídeo top demais ❤

@rainynight9926 5 ай бұрын

Pes etme. İsviçre My mechanic kanalını geçersin tebrikler. 👍🙂

@user-sv8fk3ff8u Жыл бұрын

Good very good 👏👏🌹🍀🍀

@imperialpresence1173 10 ай бұрын

if you ask that question...the answer is almost always yes

@luizalbertorodrigues4560 Жыл бұрын

The best

@keithfreeman2139 Жыл бұрын

I liked this one. Good Job. and I just subbed abd liked.

@ForgottenShineRestoration Жыл бұрын

Thank you very much and welcome! 🐢

@keithfreeman2139 Жыл бұрын

@@ForgottenShineRestoration I see you also sre able to read bad typing skills. LOL

@cptea Жыл бұрын

What's the measuring/scribing tool used at 11:29 of the video?

@tuomaspeltonen090 4 ай бұрын

What compressor you use?

@tmjvtxtmjvtx Жыл бұрын

4 hrs till I need to get up.....pulley restoration it is!

@ForgottenShineRestoration Жыл бұрын

😅🐢

@jayboo1447 11 ай бұрын

Forgotten Shine Restoration, what paint are you using?

@ForgottenShineRestoration 11 ай бұрын

Hammerite 🐢

@raikbusse7697 9 ай бұрын

Bei den Werkzeugen hast du den Schraubstock vergessen, der aus meiner Sicht ein Modell "Baumarkt" zu sein scheint. Vielleicht versuchst du demnächst mal einen alten Schraubstock zu restaurieren. Das Video ist ansonsten super gemacht, ich abonniere.

@ForgottenShineRestoration 8 ай бұрын

Vielen Dank und herzlich Willkommen. Der Schraubstock ist auch schon sehr alt und kommt aus der ehemaligen DDR. Ich habe sogar schon zwei Schraubstöcker restauriert 😅🐢

@marcocateni9824 5 ай бұрын

Non so se poteva valerne la spesa, trattandosi di un oggetto non certamente di gran valore, ma per fare un lavoro più sicuro avrei messo dei cuscinetti. 😉

@sorayaya3080 Жыл бұрын

15:37 I could've sworn that was cheese at first

@ForgottenShineRestoration Жыл бұрын

😅🐢

@andreasm481 Жыл бұрын

Tja bei alten Scheunenfunden muss man schon mit Kuhscheisse rechnen. Ich halte das aber für jahrzehntealten Dreck. Ansonsten wieder sehr gute Arbeit. Mit dem Pinsel arbeite ich nicht, ich nehme generell Farbspray. Wird gleichmäßiger. Und für die Buchstaben gibt es Marker-Stifte, sieht auch besser aus. Viele Grüße an Turtle !

@ForgottenShineRestoration Жыл бұрын

Danke, ja mit dem Pinsel arbeite ich persönlich auch nicht gern. Ich bevorzuge eher einen Farbroller oder ebenfalls Spray. Aber ein bisschen Abwechslung muss ja auch sein... 🐢

@zLrzd Жыл бұрын

Bro Op you are my favorite youtuber❤️🙏. I wish you reply to me.

@ForgottenShineRestoration Жыл бұрын

Here is my answer 🤪 Thank you very much! 🐢

@rn6380 Жыл бұрын

If that came out of a barn then yes, it definitely was poop.

@ForgottenShineRestoration Жыл бұрын

😱😱🐢

@rogeliobaez3879 4 ай бұрын

The turtle felt so used

@ForgottenShineRestoration 4 ай бұрын

🤣🤣🐢

@guggemamolo Жыл бұрын

Hallo, danke für das schöne "ruhige" Video und das du mir und Turtle das Schweißlichtschein ersparst. Warum keine Grundierfarbe verwendet und Gewindeschneiden, des Bolzens, auf der Drehbank. Erlaube mir einen Tipp abzugeben (bei dir nicht nötig da du eine sehr ruhige Hand hast) Sehr feine Linien bzw. Buchstaben kann man schnell und genau mit einem Lackstift zeichnen. Kopfhörer auf und ab wegen der sehr lauten Werbeunterbrechung, geht nicht! Freue mich schon auf das nächste Projekt, dann hoffentlich "größer". Gruß aus Mannheim, BRD, BW Martin

@ForgottenShineRestoration Жыл бұрын

Danke für deine Tipps! Bei der Hammerite Farbe braucht man theoretisch keine Grundierung. Das Gewindeschneiden auf der Drehbank muss ich noch üben, das Absägen hat mir auch nicht gefallen, aber kurz vorher ist mir der Drehmeißel abgebrochen 😅 Grüße ebenfalls aus Deutschland 🐢

@guggemamolo Жыл бұрын

@@ForgottenShineRestoration Hallo erst mal, Hammerlack: habe ich nicht gesehen, klar haste recht! Gewindeschneiden auf der Drehbank, (besonders kleine Innengewinde) voll einfach und super im Lot und Drehmeiselschneide abgebrochen (Mist) aber aus Fehlern lernen (auch wir). Ich denke: Fehler/Pannen ruhig zeigen, Mut zur "Unvollkommenheit" (wenn der Fehler nicht peinlich ist). Danke für die Antwort und bis dann !!! Martin