Putting a Supra LSD into an 8" Toyota truck/4Runner differential
Рет қаралды 880
Күн бұрынEp. 56 Snale Racing Converts an 8" Truck Diff to a Limited Slip
gnob takes an MK3 Supra diff (1986.5-1992) and uses a Weir kit to install it in a Toyota truck/4Runner housing. Follow along and do your own conversion. Find the links mentioned in the video below:
www.gearinstalls.com/index.htm
www.weirperformance.com/maxgri...
Here's the one where gnob talks about preload:
• Danny Bonaduce gets a ...
00:00 overview
01:34 initial breakaway test
02:14 weir parts kit
02:53 opening the LSD
03:58 comparing open diff to LSD
05:20 diff disassembly
09:14 installing shims
14:19 installing springs
16:03 final breakaway test
Follow us on Instagram: / snale_racing
Subscribe to our newsletter: snaleracing.substack.com
Support us on Patreon: / snaleracing
@blackote Жыл бұрын
Did this mod to my XRunner a few years back... Love it!
@SnaleRacing Жыл бұрын
who does kits for the 8.4?
@blackote Жыл бұрын
@@SnaleRacing not sure of 8.4" but for 8" I used the same weir kit stage 1
@SnaleRacing Жыл бұрын
ok. you have an 01-04 X? i forget they exsist. kit made a big difference, I'm excited to actually test it.
@blackote Жыл бұрын
@@SnaleRacing The Toyota Tacoma XRunners specifically 05-08 (I have an 07) use the same supra mark 3 differential.
@SnaleRacing Жыл бұрын
thanks. was thinking 05+ was 8.4 all.
@dieseldog1959 Жыл бұрын
Nice. Did the camera survive the carnage or did you have to swap out?
@SnaleRacing Жыл бұрын
cam lived. accessories a little worse for the wear🤣
ThePracticalMechanic
Рет қаралды 230 М.
Dirtified en Español
Рет қаралды 738
Ratchet Finesse
Рет қаралды 9 М.
Erdes Cars
Рет қаралды 11 МЛН
Truck Drive
Рет қаралды 13 МЛН