Putting convex edges on knives with the Wicked Edge
Рет қаралды 1,165
5 ай бұрынHow to put a convex edge on any blade or maintain an existing convex edge on the Wicked Edge Precision Sharpeners sharpening system
@kurtrasmussen4294 5 ай бұрын
Also to be clear, if my existing V-grind angle is at 18 dps and I want a final angle of 20 dps than I should set my angle to 19dps and use the lapping films at 19dps as the film/rubber will deform and produce a 20dps - approximately.
@WickedEdgePrecisionSharpeners 5 ай бұрын
That's absolutely correct! And for your other question, we call them out just to make sure you're creating a v-grind with your Wicked Edge before you begin this process. You can go into convexing after your 600, 800, or 1000 grit. All three of those will lead to great results.
@kurtrasmussen4294 5 ай бұрын
You mentioned about having the fine grit diamond stone but I didn’t see you use them. Do you recommend using them?
Wicked Edge Precision Sharpeners
Рет қаралды 10 М.
Cool Items Official
Рет қаралды 15 МЛН
Tactical Tavern Tomas
Рет қаралды 1,5 М.
Start a Knife Sharpening Service
Рет қаралды 19 М.
Wicked Edge Precision Sharpeners
Рет қаралды 22 М.
jio jio
Рет қаралды 25 МЛН