No video

Quick & Easy Whirlpool Washer Lid Switch Defeat

  Рет қаралды 386,136

jaykay18

jaykay18

Күн бұрын

Originally recorded September 2, 2017.
The owner of this machine was enthralled to know that the lid switch could be defeated. This way an extra item or two could be thrown in without stopping the washer, and she can also see how the wash is doing at any time, without holding up the cycle.
Very simple, open the control panel, find the 3 connector plug. DO NOT USE THE GREEN WIRE, leave it attached. Cut the other two wires. On the wires coming from the control panel, strip the insulation, twist them together, wire nut, and electrical tape. Solder and heat shrink tubing is also acceptable and in fact preferred.
If your washer has a lid lock, a play/pause button, or different color wires, this will not work. If you ask me if it will work anyway, I will publicly humiliate you in the comments.

Пікірлер: 573
@petulantfrenzy5532
@petulantfrenzy5532 Жыл бұрын
A year of frustration is over. Took longer to find my wire stripper than to do the job. Plugged it back in and hot damn it fired back up. You are my hero today. Thanks.
@jaykay18
@jaykay18 Жыл бұрын
Great to hear! Happy washing!
@pirateorona92
@pirateorona92 4 жыл бұрын
I know this is from 2 years ago, but you just saved me from having to buy a whole new washer! I bought and installed 2 new lid switches thinking it was faulty parts.. but no it was the darn connector and by bypassing it, it works again! We have had this washer in the family since my parents bought it new over 20 years ago!
@jaykay18
@jaykay18 4 жыл бұрын
Excellent! Keep that machine running at ANY cost--you cannot buy another washer out there that can do anywhere near as good of a job!
@All-Those-Rosenbergers
@All-Those-Rosenbergers 9 ай бұрын
What is the washer model, please? We want to see if we can find one. We have a large family and need something reliable and easy to fix
@FixitWithFoxy
@FixitWithFoxy 6 ай бұрын
Where is the connector you are referring to? Please give me a step by step i can try- if you have the time! Tia!
@pirateorona92
@pirateorona92 6 ай бұрын
@@FixitWithFoxy this was 3 years ago... I no longer have that washer. But it's under the front panel... There should be 2 clipped in trim pieces on the front side. You take those off and there's screws underneath those.. there's a couple screws on the back if I remember correctly, but if I were you def look up other videos on how to open the control module then come back to this video
@alanparkinson320
@alanparkinson320 3 жыл бұрын
Bravo! Saved me a remodel of my laundry room to replace the unit just like the one in the video. (The space BARELY fits the current 15 year old units and while I could afford a brand new set, they are all wider and I would have to take out a wall to fit them in). Hopefully this fix buys me a few more years! THANK YOU!
@jaykay18
@jaykay18 3 жыл бұрын
You're welcome! It'll buy you way more than a few years, that machine can last forever and it's simple to fix if something goes wrong, and parts are inexpensive. I have many other repair videos on these types of washers, so in the rare event you do have a problem, you know who to go to!
@davidbasore4750
@davidbasore4750 3 жыл бұрын
This video saved me, we where doing laundry tonight before a big trip and the washer just stopped, I did this and now we will be able to have all our laundry done in time for the trip. Thank you
@jaykay18
@jaykay18 3 жыл бұрын
Glad I could help!
@kaystone777
@kaystone777 5 жыл бұрын
Worked like a charm for me! I wasn't even sure if the lid switch was the problem because I don't have a ohm-meter or whatever. Too fancy. But the load of laundry stopped mid-cycle, and it would add more water but wouldn't spin. I read that the lid switch is a common culprit so I will get the part online. I'm a mom to a 5 month old and I needed to be able to do laundry NOW!
@jaykay18
@jaykay18 5 жыл бұрын
Glad I was able to help out! Multimeters aren't expensive, Harbor Freight often has coupons giving them away free with purchase--go in, buy a pack of batteries you can always use, and get a free meter. More than plenty enough for simple testing like this.
@lhuncho5284
@lhuncho5284 2 жыл бұрын
Shout out to you. Got this same washer had it for 10 years now and because of you it will last longer Thank you
@jaykay18
@jaykay18 2 жыл бұрын
You're very welcome. It will last for way longer than 10 more years. Never get rid of it, fix it at any expense, you will never be able to buy another one because they stopped making them. I have other repair videos, and if you don't find one of mine, there are many others out there. Parts are cheap and plentiful, yet the machines rarely break.
@Don-sx5xv
@Don-sx5xv Жыл бұрын
THANKS BROTHER, YOU HAVE MADE MY DAY. HONESTLY WHEN WAS THE LAST TIME YOU HEARD OF A SMALL CHILD CLIMBING UP THE SIDE OF A WASHER AND GOING FOR A DIP WHEN ITS RUNNING.
@jaykay18
@jaykay18 Жыл бұрын
Thanks. great question. Though I am surprised that in this day and age, we don't hear of it more, because parents don't watch their kids anymore.
@jeffogden6060
@jeffogden6060 3 жыл бұрын
I was about to order the OEM part for $39, then the knock-off for $9. Yours is an even better solution. Simple, well explained, perfect. Brilliant, thanks! Read several comments. Do you ever get tired of the red, white, and blue wire questions? 😉
@jaykay18
@jaykay18 3 жыл бұрын
Thanks Jeff! Yes, I sure do get tired of them. Thank you for reading through the comments, often there is a wealth of information and questions that have already been asked, that have been answered. I have many other videos of these types of machines, including several repair videos. In case you ever need them, you'll know where to look first!
@kickasbutterfly
@kickasbutterfly 2 жыл бұрын
Where'd you see the OEM part for $39?
@jeffogden6060
@jeffogden6060 2 жыл бұрын
@@kickasbutterfly Parts direct
@tinamuro7936
@tinamuro7936 2 жыл бұрын
Omg I fixed my machine. I did exactly what you showed. I previously did a different way and it caught fire and melted part of the black adapter. With electrical tape. I used an electrical cap to the Grey and white wire. Omg you saved me so much money. Thank you thank you for showing exactly what to do. I am sooooo happy.
@jaykay18
@jaykay18 2 жыл бұрын
Those wires are carrying the full current of the motor, so they have to be good, solid connections.
@mesa50go
@mesa50go Жыл бұрын
Love the video. Took me 20 years to realize that you shouldn't twist the wires individually if you are using a wire nut. The bare loose strands grip much better and mesh better, creating a better electrical joint. Thank you!
@jaykay18
@jaykay18 Жыл бұрын
Thanks. I've had mixed results both ways, and have found that for me, twisting them usually works better.
@mattkidroske
@mattkidroske 5 жыл бұрын
My washer was filling but not agitating and I was so frustrated, but this totally worked! Thank you so much. Took 3 minutes.
@jaykay18
@jaykay18 5 жыл бұрын
Great to hear!
@karenk469
@karenk469 5 жыл бұрын
Thank you! Just did this to the machine I picked up for my shop. You explained it very well, took me longer to get the panel open than to snip and wrap up the wires!
@jaykay18
@jaykay18 5 жыл бұрын
Thanks Karen!
@alcapwnlol
@alcapwnlol 3 жыл бұрын
Thanks man. After reading reviews on replacement switches, I decided to just save myself the time and do this. Wishing I never actually removed the old switch at this point! Good video.
@jaykay18
@jaykay18 3 жыл бұрын
Thanks Kevin!
@jordanscoffman
@jordanscoffman 3 жыл бұрын
@@jaykay18 my parents have this same washing machine. I just replaced the lid latch switch and the lid will still open mid cycle. What would be your next step?
@jordanscoffman
@jordanscoffman 3 жыл бұрын
Model #110.29522800 Kenmore
@jayewalking662
@jayewalking662 4 жыл бұрын
Thank you! After a week of trying to figure out my machine, this took just a couple minutes and it works!!
@jaykay18
@jaykay18 4 жыл бұрын
No problem Jaye!
@leatherneck7476
@leatherneck7476 3 жыл бұрын
@@jaykay18 My wires are red, white and blue? Suggestions?
@jaykay18
@jaykay18 3 жыл бұрын
@@leatherneck7476 Read the description. LIKE YOU SHOULD DO FOR EVERY VIDEO.
@andrewbresette9323
@andrewbresette9323 4 жыл бұрын
Thanks for posting this, I was just getting ready throw in the towel and go get another washer. You were clear on the instructions and right to the point.
@jaykay18
@jaykay18 4 жыл бұрын
Thanks. Point is, you CAN'T get another washer, at least not one that works like this. Doing that would have been the worst decision you've made.
@44556613able
@44556613able 4 жыл бұрын
My washer went down yesterday...timing is bad as we are still on lockdown in Michigan. I followed the steps with minimal tools and corrected. I am the least handy dude around by the way. Thank you very much
@jaykay18
@jaykay18 4 жыл бұрын
You're very welcome!
@salify313
@salify313 4 жыл бұрын
3 minutes just saved me 300 dollars. You are very much appreciated!
@jaykay18
@jaykay18 4 жыл бұрын
Thank you!
@dawolfman5548
@dawolfman5548 Ай бұрын
Thanks for the info because slamming the lid was working but stopped now I don’t have to worry about that situation 💙
@jaykay18
@jaykay18 Ай бұрын
You're welcome.
@Chris_99502
@Chris_99502 2 жыл бұрын
Jay you would be proud of me, I read the description and determine that this wouldn't work for my washer :) I can't speak for the other people though.
@jaykay18
@jaykay18 2 жыл бұрын
Thank you Chris! I'm only sorry that you can't use this trick on your washer. But I would suggest, if it's too costly to fix, that you find a good used appliance shop and buy an older washer. Chances are very good you will have it for 30 years or more without a problem. And if you find a machine like the one I showed in this video, I have several repair videos on it for common problems, that are super-inexpensive to fix.
@cowboybassplayer6083
@cowboybassplayer6083 5 жыл бұрын
Thanks for the video man. I JUST replaced the timer on our washer about a month ago, and then it was on again, off again working. We'd open the lid and shut it again, and it would work for a couple minutes and then cut back out. It was driving my wife and I nuts, and we didn't really WANT to go buy a new washer and dryer after JUST spending $160 for the timer. Figured it was the switch, saw this video, and voila! Works like a charm. Thank you!
@jaykay18
@jaykay18 5 жыл бұрын
Great to hear Bruce!
@ferrarista27
@ferrarista27 4 жыл бұрын
I wanted to thank you about this fix. Worked like a charm on my Kitchenaid. The washer was stopping mid-cycle. Now its back running again. Happy 2020!
@jaykay18
@jaykay18 4 жыл бұрын
Great to hear, thanks for watching! Happy New Year!
@user-ss5si5co4h
@user-ss5si5co4h 2 жыл бұрын
Thank you 😊...I was going nuts trying to figure out what is going on. I'm glad that you posted this because IT'S SAVING MONEY 💰 FOR A 10 MINUTE FIX...THANKS AGAIN.
@jaykay18
@jaykay18 2 жыл бұрын
You're welcome.
@fish3359
@fish3359 5 жыл бұрын
You are THE MAN !!!! Fixed washer in 5 minutes.
@jaykay18
@jaykay18 5 жыл бұрын
Great to hear Marlon!
@simonwallace4719
@simonwallace4719 4 жыл бұрын
Excellent! My grandmother's whirlpool machine that I acquired lives on. I don't need to go and find a replacement machine or spend anything on my current one!
@jaykay18
@jaykay18 4 жыл бұрын
You SHOULD replace the lid switch, it's cheap. This job was done because the owner asked for it to be, not because the switch failed. On my own personal machines, I put a switch in so I could have the lid switch operate properly, or have it always disabled.
@kev6589
@kev6589 11 ай бұрын
Just wanted to say thanks! I made a jumper to try on the connector first before I made the cut and it was the culprit! Thanks again!!!!
@jaykay18
@jaykay18 11 ай бұрын
You're welcome!
@2463anup
@2463anup 2 жыл бұрын
This suggestion works, saved me the hassle/expense of buying a new washer
@jaykay18
@jaykay18 2 жыл бұрын
Great to hear!
@toddcastille530
@toddcastille530 5 жыл бұрын
Thank you so much! My washer stopped mid cycle. Did this bypass, it worked. I was getting ready to go out and buy a new one.
@jaykay18
@jaykay18 5 жыл бұрын
Don't ever do that Todd, you'll never get another washer that works as good as this one! You can find a replacement lid switch online pretty cheap if you were interested in replacing it.
@woezacardoza5659
@woezacardoza5659 2 жыл бұрын
P
@krsp7288
@krsp7288 3 ай бұрын
Many people don't know to keep their kids out of washing machines. Sad times. Great video, thanks
@jaykay18
@jaykay18 3 ай бұрын
Indeed you are correct! You're welcome.
@bolodontv
@bolodontv 3 жыл бұрын
All the way from Jamaica just wanna say thanks for your video it left me to fix my washer I did exactly the same thing you did an it's works like new thanks a lot for your help
@jaykay18
@jaykay18 3 жыл бұрын
Glad I could help
@blondechineez1545
@blondechineez1545 2 ай бұрын
@jaykay18 you RoCk my friend. I can't thank you enough for this. This happens to be my second repair ever on a washer and I'm soooo stoked to do it with your instructions! Mahalo nui loa!
@jaykay18
@jaykay18 2 ай бұрын
You're very welcome!
@stephencarlisle8132
@stephencarlisle8132 3 жыл бұрын
Thanks! I replaced this switch a few years ago and it started to go again. Now I don't have to worry about it.
@jaykay18
@jaykay18 3 жыл бұрын
Sure, no problem!
@susankramer7767
@susankramer7767 4 жыл бұрын
Husband said THANK YOU! This was simple and easy!
@jaykay18
@jaykay18 4 жыл бұрын
You're welcome!
@dyaneth21cubana
@dyaneth21cubana 3 жыл бұрын
Thank you so much, can't afford a washer right now and this video was a blessing.
@jaykay18
@jaykay18 3 жыл бұрын
Sure, no problem.
@dualactionsurgilator
@dualactionsurgilator 2 жыл бұрын
Jay I used this trick today to fix a Kenmore washer that would not complete the cycles. I also replaced the timer as only one cycle worked.
@jaykay18
@jaykay18 2 жыл бұрын
Great to hear!
@LaneyandherGermanShepherds
@LaneyandherGermanShepherds 5 жыл бұрын
You have saved my life thank you ! I fixed mine !! God bless you!
@jaykay18
@jaykay18 5 жыл бұрын
Great, glad to hear!
@734smyth
@734smyth 4 жыл бұрын
Thanks for letting me at least finish the load without bailing water. This will buy us some time on these old appliances. Now the wife gets to pick out a new washer and dryer. :-)
@jaykay18
@jaykay18 4 жыл бұрын
Make that smiley face a frown face--there are NO washing machines on the market, at any price, that can do as good of a job as what you have. Fix what you have at any price, believe me, you'll end up being really sorry if you replace it. Not to mention, it won't last anywhere near as long as this machine. I have two of these "direct drive" Whirlpool machines, one is 11 years old and the other is 26 years old. I've replaced ONE part on the older one, a $6 part called the agitator dogs, and I have a video on how to change that. Also I have replaced the timer on this machine in this video, and a motor coupler on another one. They're easy to work on, parts are cheap and plentiful. Trust me. If you don't want to and pick out a new set, tell me how bad it is.
@marikiemarie7622
@marikiemarie7622 2 жыл бұрын
Why would you need to get a new set? The newer they are...the worse they are.
@user-eh6te4kq3j
@user-eh6te4kq3j 11 ай бұрын
I'm so please with your video. Thank you for helping me fix my machine, greatly appeciated!
@jaykay18
@jaykay18 11 ай бұрын
You're welcome.
@kimberlymonaghan2598
@kimberlymonaghan2598 4 ай бұрын
Thank you so much for this tutorial! You are a lifesaver!
@jaykay18
@jaykay18 4 ай бұрын
You're welcome.
@edwintroyer7106
@edwintroyer7106 Жыл бұрын
Boom you did it, and i repeated your process on mine and it works. Thanks
@jaykay18
@jaykay18 Жыл бұрын
You're welcome.
@marikiemarie7622
@marikiemarie7622 2 жыл бұрын
Would have been more helpful to mention the modle you are working on. My machine did not have any green wire at all. Only red, white blue and a light yellowish
@jaykay18
@jaykay18 2 жыл бұрын
It would be even more beneficial if you read the video's description.
@user-ic1pm6uo7w
@user-ic1pm6uo7w 5 жыл бұрын
Great Video thanks!....By the way, her fire alarm battery is low.. I heard the chirp
@jaykay18
@jaykay18 5 жыл бұрын
Yeah, no kidding. It was driving me nuts when I was there! Chances are good that battery went dead completely and hasn't been replaced.
@user-ic1pm6uo7w
@user-ic1pm6uo7w 5 жыл бұрын
@@jaykay18 they probably though it was a cricket
@jaykay18
@jaykay18 5 жыл бұрын
Probably not far from the truth.
@elsieshaffer
@elsieshaffer 3 жыл бұрын
Thank You I Hate my washer and now you made it Better
@jaykay18
@jaykay18 3 жыл бұрын
You're welcome.
@brandipiazza5420
@brandipiazza5420 5 жыл бұрын
Saved us some money and time. For some one on a 700.00 a month income thanks wife greatly appreciated this.
@jaykay18
@jaykay18 5 жыл бұрын
No problem at all! You're better fixing the machine you have anyway since washers today are garbage; you'll never get things so clean again. Fix whatever goes wrong and you'll be much better off anyway, laundry-wise and financially!
@robertabrams91
@robertabrams91 7 ай бұрын
Thanks...worked like a charm.
@jaykay18
@jaykay18 7 ай бұрын
You're welcome.
@keithlucas6260
@keithlucas6260 3 жыл бұрын
We just used a wire bread tie to jump the contacts in the wire loom connector. Just stripped enough of the wire on each end to fold it twice and push it in the back end of each connector, #1 & #3.
@jaykay18
@jaykay18 3 жыл бұрын
A bread tie? I'd expect wire that thin to melt immediately. If I'm not connecting wires directly together, I use a minimum of 14 AWG.
@keithlucas6260
@keithlucas6260 3 жыл бұрын
@@jaykay18 ....I'm a certified electrician and the circuit goes into connecting a transistor on a circuit board....that new part is $90 bucks, and on Amazon $130. When it eventually gets replaced after this Christmas, your fix has to be undone, mine just gets removed. My son-in-law needed a quick fix, and I told him to Google it.
@jaykay18
@jaykay18 3 жыл бұрын
@@keithlucas6260 He must have a different machine. There are NO circuit boards in this washer at all, it's all done with mechanical switches and timers.
@keithlucas6260
@keithlucas6260 3 жыл бұрын
@@jaykay18 ...yep the wires are 1\8 aw which are basically the same size as that bread tie with thicker plastic. My son-in-law didn't unplug the machine and just pushed the wires in hot, got shocked and shorted the board. I usually use one of those blue tag connectors that come with trailer wire kits to tie into the wireloom. I cut out the end stop on the one side making it easy to just bypass without all the hassle of cutting, stripping and wire nutting the ends plus figuring out where to fasten it to with an added wire tie....looks neater as well as un-doable.
@jaykay18
@jaykay18 3 жыл бұрын
@@keithlucas6260 I had no need to undo this modification. I find that wire-nutting provides for a much more positive connection. Preferably I'd solder and heat-shrink.
@vidswsuds4879
@vidswsuds4879 3 жыл бұрын
Thank you sir. Much appreciated. The part was 10 bucks online. 28 at a local store. To me it's just 1 more thing to break (as it did). I'm good with bypassing it. The repair cost me nothing. Back in business now. thanks.
@jaykay18
@jaykay18 3 жыл бұрын
You're welcome!
@christianchavez1616
@christianchavez1616 2 жыл бұрын
La tele está en Español 😄 Good Video Thanks for sharing it definitely worked 👚👕👖
@jaykay18
@jaykay18 2 жыл бұрын
Yes, the child that lives there, the parents speak Spanish. Glad this video helped.
@P.S.009
@P.S.009 4 жыл бұрын
Fixed my problem and saved me a lot of trouble.👍Thxs
@jaykay18
@jaykay18 4 жыл бұрын
Great to hear!
@jamesminton91
@jamesminton91 2 жыл бұрын
im so glad your here ! so i hsve an 2005 whirlpool cabrio platnum the fella down the road said i cabt disconnect my lid lock !! i accidently broke off the tab to lock it ...im hoping to disconnect please advise ..
@jaykay18
@jaykay18 2 жыл бұрын
No way to do it, you have to replace the broken piece.
@jamesminton91
@jamesminton91 2 жыл бұрын
@@jaykay18 ok i sure do Thank you
@jaykay18
@jaykay18 2 жыл бұрын
@@jamesminton91 No problem, best of luck.
@marcwcassidy
@marcwcassidy 5 жыл бұрын
Thank you Jay. You saved us!
@jaykay18
@jaykay18 5 жыл бұрын
You're welcome!
@Sammyc53
@Sammyc53 2 жыл бұрын
How many of you are now looking around your house for a fire alarm with a low battery? Lol.
@jaykay18
@jaykay18 2 жыл бұрын
Some people like that. My dad called me up one day on the phone and as he's talking to me, I could hear the low battery alarm in the background. I told him to change the battery, but no, he left it beeping, because I heard it the next time I spoke with him. He always kept spare batteries around, but maybe, just maybe, he was out of 9 volt batteries. I needed to head out there to see him, and figured I'd bring a 9 volt battery along and give it to him, since he's generally a tightwad. I gave him the 9 volt battery. Couple weeks later, I spoke to him on the phone. Still going off. I guess he just HAD to squeeze the last ounces of juice out of that battery before he was going to change it. For me, personally, it would drive me insane. I actually don't have that problem of a low battery since all of my smoke detectors are hard-wired to my alarm panel. Now if the alarm panel battery goes dead, that's a different story. In fact, now that I mention it, it did, a couple months ago. 5 alarm keypads started screaming all over the house. There is no way to live with that since the sound is constant. Silly me, I had an extra 8 Ah on hand so I could replace it right away. I replaced it immediately. Old battery saved for other nefarious purposes...
@nicolenelson5763
@nicolenelson5763 3 жыл бұрын
Hey Jay, great video! My washer stopped draining/spinning. Inspected the switch and it was for sure bad. The connector and switch had melted together. Is this a common problem? What would cause them to melt together like that?
@jaykay18
@jaykay18 3 жыл бұрын
I have seen that happen before. Generally, a bad connection, corroded metal contacts, or moisture can cause that. A bad connection causes heat, heat causes plastic to melt.
@Sport-ro8us
@Sport-ro8us Ай бұрын
Can you help me, my washing machine has different colored cables: green, gray and black. The gray and black do pass current and the green does not. I can do what you show in your video but with the gray and black cable? Thank you, I will appreciate your help.
@jaykay18
@jaykay18 Ай бұрын
In AC (Alternating Current) circuits, such as the washing machine in this video, green is almost always ground. So that stays left alone. If there are ONLY 2 other wires, you should be able to do the same. You can check the wiring diagram (should be tucked in the underside of the controls panel) to be sure.
@Sport-ro8us
@Sport-ro8us Ай бұрын
​@@jaykay18thank you
@omarnvd
@omarnvd 5 жыл бұрын
Thank you! Fast and easy!👍🏻
@jaykay18
@jaykay18 5 жыл бұрын
Yep, just like the title says!
@Silkaz7
@Silkaz7 2 жыл бұрын
My wires are brown, white and black, also a whirlpool top loader machine... I connected the brown and black together... that makes the machine be able to rinse and spin... but I have to revert them to normal if I want the machine to go through a wash cycle... when the wash cycle goes to the rinse and spin part I have to jump the wires again (brown and black) /// Is there a way to just not have to be moving wires around? The part arrives 3 weeks from now, and I have no kids, it is really annoying having to do every time I want to complete the wash cycle.
@jaykay18
@jaykay18 2 жыл бұрын
Without a model number, it's very hard to tell.
@perroblanco49
@perroblanco49 Жыл бұрын
jaykay18 I need help! I forced the lid open and now it makes a clicking sound but the washer does't work. my washer is a Whirlpool model wtw5000dw2. I think I broke the lid switch, the washer is about 2 years old. is probably the same model as the one you'r working on in the video. if I do the same thing you did do you think it will work? please I need an answer.
@jaykay18
@jaykay18 Жыл бұрын
You can start by helping yourself first. You say your washer is 2 years old. There's this thing called a VIDEO DESCRIPTION. In that, I always put the date of recording in. If you would even give half a damn and TRY first, you'd realize this won't help you.
@justwanderer2179
@justwanderer2179 3 жыл бұрын
Sir i have a whirlpool top load commercial washing machine, i have 4 wires red,blue, yellow, white, which one should i top to bypass?
@jaykay18
@jaykay18 3 жыл бұрын
Why don't you "just wanderer" over to the video description first. I don't write those video descriptions for my health, you should read them for yours.
@yoimcalvinable
@yoimcalvinable 3 жыл бұрын
Thank you for this video; I tried shorting the black and white leaving the green intact but it still doesn't work. It is a whirlpool washer and dryer combo; do you have any recommendations? Many thanks. *I saw your additional humiliation clause; I have traced the latch assembly wires from the panels onwards; at this point I just want to drain the tub and get a new machine. Is there any other way to drain the washer than the 'hose' in the bottom? Many thanks.
@jaykay18
@jaykay18 3 жыл бұрын
You mentioned "latch assembly". If this machine you have will latch the lid closed while washing or spinning, you're completely out of luck.
@ToddFucxer
@ToddFucxer 5 жыл бұрын
I could be wrong, but it was my understanding that those particular cutters are designed for zip-ties and not wire.
@jaykay18
@jaykay18 5 жыл бұрын
Nope, those are definitely marketed as wire strippers. There's even a little adjustment screw that can be loosened, and a guide moved, to accommodate different wire gauges. There is a separate tool just for zip ties, one of these days I'll pick that up.
@ToddFucxer
@ToddFucxer 5 жыл бұрын
Ok, mine, have no adjustment or markings, just purely cutters other than that they're physically identical, but mine are zip-tie cutters, that's why I brought it up lol
@jaykay18
@jaykay18 5 жыл бұрын
I'm wondering if they screwed up marketing the one you have. Do a quick search on Google for "zip tie cutters" and it doesn't come up with a tool that looks like this.
@sammartinez7549
@sammartinez7549 5 жыл бұрын
thank you for the video it saved me some money
@jaykay18
@jaykay18 5 жыл бұрын
No problem Sam!
@danielburns4476
@danielburns4476 8 ай бұрын
My lid switch connector melted. I tried to bypass just as you showed in the video, but it did not do anything. I checked the wires for connectivity, and there is none. Do you have any suggestions?
@jaykay18
@jaykay18 8 ай бұрын
Please give me the model number for your machine so I can look up the schematic and help you further.
@ericnelson1397
@ericnelson1397 5 жыл бұрын
Thanks for the video. Worked like a charm.
@jaykay18
@jaykay18 5 жыл бұрын
You're welcome.
@adenlove9207
@adenlove9207 Жыл бұрын
Great Video and highly appreciated However, question to be raised my Waching machine when I lift the Lid its stopped but when release the Lid again the Machine does not started and you can't hear any clicking, please advise, B.Regards
@jaykay18
@jaykay18 Жыл бұрын
With a model number of the machine, I can research it a little further. But these lid switches have been known to go bad in such a way as you explained. Replacing or disabling it may solve the problem.
@nikkiwells8148
@nikkiwells8148 Жыл бұрын
What if the ground wire comes loose what do I do with it after that if it's loose can I leave it loose also or do I need to hook it to something
@jaykay18
@jaykay18 Жыл бұрын
Can you leave it loose? Well, they didn't put the wire there to just get in your way. It was put there for a reason, and for a good reason. Find a way to reattach it. Make a good, solid connection to an unpainted metal surface. That ground wire could save your life.
@nikkiwells8148
@nikkiwells8148 Жыл бұрын
Okay what color is the ground wire on a 3-wire door lock switch or what two colors do I connect and the reason I sound like such an idiot and I don't know what I'm doing I've been watching videos I can't figure it out however I didn't start this job somebody else did and then they didn't finish it my boyfriend so I'm trying to finish it cuz I really need my washer to work but I think he might have connected the wrong wires can't I just hooked the ground wire to something else so that it's just as long as it's grounded right also thanks for answering
@jaykay18
@jaykay18 Жыл бұрын
@@nikkiwells8148 The reason you can't figure it out is because you didn't read the video description. NOWHERE does this video mention, show, or say anything about a door LOCK. The description says a lot more.
@nikkiwells8148
@nikkiwells8148 Жыл бұрын
Ok fine washer lid switch then but my question remains the same if I have a white wire and blue wire and a red wire which two colors do I connect please tell me
@jaykay18
@jaykay18 Жыл бұрын
@@nikkiwells8148 *YOU STILL DIDN'T READ THE VIDEO DESCRIPTION.*
@Elon_Trump
@Elon_Trump Жыл бұрын
Would you happen to know which to cut and splice on a 3 wire ? I got red white and blue.
@jaykay18
@jaykay18 Жыл бұрын
No, but I definitely know you don;t read video descriptions. I don't write them for my health, you should read them for yours.
@kaylasmith2386
@kaylasmith2386 2 жыл бұрын
Great and very helpful video. I do have a question, what if I don’t have the little green piece you put on the end of the wires? Is it something else you can use?
@jaykay18
@jaykay18 2 жыл бұрын
You can solder the wires and use heat-shrink tubing, but that requires skill. Do not substitute, the full current of the machine is passing through these wires. If they short out you're going to have a very big problem. You need wire nuts. Home improvement stores sell them.
@leeannarose6384
@leeannarose6384 Жыл бұрын
Hey, did you get the answer to that question? I'm wondering if I can just use electrical tape
@iamthepapi6622
@iamthepapi6622 4 жыл бұрын
Not to be a hater or anyting but you can do this with other washers with different color wires. For instance mine has two White two yellow one black one blue. I believe if I hook up everything but the white wires together it will be good to go I think. The washer does not have a play or pause button or a lid lock it's an old Maytag.. What do you think brother you think I'm good? I'm about to skin this smoke wagon.. there's no ground wire on mine. Ground wire is clearly separate.
@jaykay18
@jaykay18 4 жыл бұрын
Sure, this can be done with an old Maytag like that. First thing you want to do is meter EVERYTHING. Once you do that, you should be able to determine which wires are which and what they do. Better yet just replace the switch.
@iamthepapi6622
@iamthepapi6622 4 жыл бұрын
@@jaykay18 hey can I show you something real quick I seen a video of this Mexican guy floating the wires and it's identical to my washers the wires are in the exact same place. I'll send you the link so you can just look at it.. I don't want to Frye nothing. I work on used appliances and sell them I have for about 2 years I'm still learning but I'm all right at it. basically I'm just trying to see if cutting these wires and splicing them together would be the same as floating it like this Mexican guy is. I would ask him very easily but his comments are turned off on every single one of his videos. I don't blame him either people are ridiculous
@iamthepapi6622
@iamthepapi6622 4 жыл бұрын
@@jaykay18 Man I would replace the switch but I would have to order it nothing is open right now because of the "virus". I don't really order anyting I stay away from Banks and online.. However if I continue to do what I'm doing I might as well.. b But when you do that you have to rely on other people like the mailman and the person packing it and the person taking the order lol.
@iamthepapi6622
@iamthepapi6622 4 жыл бұрын
@@jaykay18 kzfaq.info/get/bejne/nsqoksKnur3VgWg.html
@iamthepapi6622
@iamthepapi6622 4 жыл бұрын
Also I should mention the actual switch it works and everything it's just the part where the lid opens. That little piece is worn off and it's not actually hitting the switch to tell the machine that the washer is closed or open. You know what I'm saying you can put a screwdriver in the hole and run the washer fine. In the spot where the little piece is supposed to push it back when you close the washer..
@chanzeizchozen1372
@chanzeizchozen1372 2 жыл бұрын
I seen this video on the washer lid lock bypass and I’m trying to do it myself on a Whirlpool mode, i ran into an issue though, the three wires you have are green white and black and the three that I have are dark blue white and red I’m not sure which ones to put together and cap off. I’m assuming dark blue and red are pos and neg and white is ground or neutral ?
@jaykay18
@jaykay18 2 жыл бұрын
Read the video description.
@GothScop
@GothScop 2 жыл бұрын
With this; one can open the lid and the machine won't stop, right?
@jaykay18
@jaykay18 2 жыл бұрын
Yes, that's correct.
@kmalcer1
@kmalcer1 Жыл бұрын
I have a newer model and it keeps going from 1 hour 9 min to washing complete with 1 min. Could this be the lid lock?
@jaykay18
@jaykay18 Жыл бұрын
It could be the fact that you have a newer model. THEY'RE JUNK, ALL OF THEM.
@gregoryerbic4667
@gregoryerbic4667 4 жыл бұрын
Oh, dang. It worked. Thanks man!
@jaykay18
@jaykay18 4 жыл бұрын
Sure thing!
@user-wh1vi6of6m
@user-wh1vi6of6m 11 ай бұрын
I'm ready to try this, but my wires are red, white and blue going into the panel in that order. Not sure which 2 on this are tied together.
@jaykay18
@jaykay18 11 ай бұрын
If you were truly ready, you would have read the video description, and not commented.
@inkfeist9581
@inkfeist9581 3 жыл бұрын
The one wire in the connector to my lid switch burned the plastic on the connector and lid switch. It oddly still works but I was hoping to replace the wires and lid switch but I'm having trouble finding replacements, mainly for the wires. Is this a safe alternative to replacing them?
@jaykay18
@jaykay18 3 жыл бұрын
Replacement parts for these machines are cheap and plentiful. Finding the actual wire connector, that's a different story. What is depicted in this video is at your own risk.
@jerrywilliams4519
@jerrywilliams4519 2 жыл бұрын
Excellent video...good job!
@jaykay18
@jaykay18 2 жыл бұрын
Thanks Jerry!
@lifeofvvjay5981
@lifeofvvjay5981 3 жыл бұрын
Thank you very helpful video just fixed mine!
@jaykay18
@jaykay18 3 жыл бұрын
Great to hear, thanks for watching!
@HugoStiglitz609
@HugoStiglitz609 2 жыл бұрын
This video is very helpful. I think it’s pointing me in the right direction. My model is a whirlpool WTW4800BQ0. my lid lock has four wires coming from the control board. Red white blue and yellow. Any idea how I could bypass this lid lock on my model?
@jaykay18
@jaykay18 2 жыл бұрын
Yes, there are two things you can do: 1. Throw out the machine. OR 2. Buy the parts that you need to fix it. That's it. There's no fooling a machine like that with a lid lock, if it's broken, there's no way to bypass it. A machine like I showed has no computers in it, it's strict point-to-point wiring like wall outlets in your house.
@HugoStiglitz609
@HugoStiglitz609 2 жыл бұрын
@@jaykay18 I appreciate the prompt reply. They have the entire lid lock mechanism for $50 was just trying to see if I could avoid it. Thanks again!
@jaykay18
@jaykay18 2 жыл бұрын
@@HugoStiglitz609 No problem, best of luck in your repair.
@GregoryJohnston77
@GregoryJohnston77 4 жыл бұрын
Will this work on the whirlpool cabrio washer lid lock? Is this what you was doing? I was under the impression you cannot bypass the lid locks. My lid lock went out so my washer wont even start. Parts are cheap it's just cant wash anything until they arrive and it takes weeks to get anything in bfe Arkansas
@jaykay18
@jaykay18 4 жыл бұрын
Is there a reason you can't read the description or the other comments? Nobody is going to come and fix your washer for you, just like I'm not spoon feeding the answer.
@wipefeetnmat
@wipefeetnmat 3 жыл бұрын
Hey man. I have a Whirlpool LSR8010PQ0 and the middle contact of the switch melted. I tried your method and the washer won't run, after about 60 seconds of waiting for it to do anything I smelled something melting so I unplugged the washer. The two wires felt warm to the touch but not hot enough to melt.
@jaykay18
@jaykay18 3 жыл бұрын
It's possible you have a bad motor, or bad capacitor. That's causing the excess current condition.
@richieortiz5
@richieortiz5 4 жыл бұрын
Have a GE washer that refused to spin/drain and is working after watching this video, thanks! Question, ended up clipping all three by mistake and the green (assuming it's the ground) is hanging freely. Should this wire be grounded somehow? Not sure what to do.
@jaykay18
@jaykay18 4 жыл бұрын
Generally, green is ground. You can possibly reconnect it from where you clipped it off. If you can't because it was clipped too close, lesson learned for next time--always leave a little slack. Quite honestly, since the machine is otherwise working, it should be fine. The top has metal-to-metal contact somewhere else so it will remain grounded.
@indoctrinationamericasgrea3543
@indoctrinationamericasgrea3543 3 жыл бұрын
Washer will drain but won't spin. Is that indicative of a faulty lid switch? Oddly, it spun fine prior to repairing the pressure hose attached to water level setting (was overflowing). Reconnect hose, no spin; unhook hose, overflows but spins fine. What's the interrelation between the two? Any advice will be greatly appreciated. Thanks
@jaykay18
@jaykay18 3 жыл бұрын
I need to first know what kind of washer this is. A lot of people think they have a washer similar to what I showed in this video, but theirs is a newer machine, which is a totally different ball of wax. If you can give me the model number of the machine I can help you further.
@indoctrinationamericasgrea3543
@indoctrinationamericasgrea3543 3 жыл бұрын
@@jaykay18 It's a Whirlpool, older model; numbers 3357978 stamped on back. Not sure if that's the model # or not. I since disconnected/bypassed lid switch and same issue occurs. When in spin mode I can spin drum by hand and it engages kind of randomly (sometimes easier than others); clutch maybe??. And thx for the prompt response.
@jaykay18
@jaykay18 3 жыл бұрын
@@indoctrinationamericasgrea3543 Ha, that's the part number for the back cabinet panel itself! All right, if this is a direct-drive unit like this, and does NOT have a lid lock, Play button, LEDs or other indicator lights on the panel, the first thing to check is agitation. If the unit WILL agitate, then the motor coupler is OK. If not, then the motor coupler needs to be replaced. If the motor coupler is OK, note that the washers have a neutral drain. So after agitating, they will stop, start up again and run the motor, but the only thing that will happen is it will drain just sitting there. That goes for about 2 minutes. After that, it will shut off for a moment, start back up, and should spin. If it's not spinning, then check the clutch. You'll need to remove the cabinet and look on top of the transmission while it's put into spin. The clutch should spin. If it doesn't, the transmission is bad. If it does, the drive block, or brake and drive tube are bad.
@indoctrinationamericasgrea3543
@indoctrinationamericasgrea3543 3 жыл бұрын
@@jaykay18 Thanks again. Won't have time today to pull it back apart, but Ill let you know what happens tomorrow. However, before I do, some say it won't agitate if clutch is bad (and it does); but it spins and pumps fine once engaged (which a faulty transmission won't do (??)); unless I'm mistaken; which is very possible. Consequently leaving me a bit confused... . Thanks again!
@jaykay18
@jaykay18 3 жыл бұрын
@@indoctrinationamericasgrea3543 Drive block, or brake and drive tube are culprits. Let me know what you find out.
@hectorfernando4445
@hectorfernando4445 2 жыл бұрын
So the gray and the white fused together. When the machine finish the whole washing cycle and I lift the door will it shut off the red light (the one that remains on at the end indicating that it's done)?
@jaykay18
@jaykay18 2 жыл бұрын
Sounds to me like you have a lid lock on your machine. If so, this won't work.
@hectorfernando4445
@hectorfernando4445 2 жыл бұрын
@@jaykay18 Yes, the door won't open unless I press the stop button on the panel.
@marcs7847
@marcs7847 Жыл бұрын
Thanks A lot! I tried the trick and it worked great.... until for some reason whatever burned out the Lid switch caused the wires to heat up and almost melt... Everyone know why or have any suggestions?
@jaykay18
@jaykay18 Жыл бұрын
The full motor current goes through those wires. If you have a bad connection anywhere, that's a source of resistance and therefore heat. If your motor has a bad capacitor, it can pull excessive current and cause overheated wires. It's time to find the root cause of the problem instead of putting bandaids on it.
@marcs7847
@marcs7847 Жыл бұрын
@@jaykay18 Thanks a lot. I'm currently doing missionary work in a 3rd world country so parts are not easy to get and a tech that can fix this is even harder to find. But I thought there was a short somewhere because when I lifted the control panel I heard the machine stop and start. Thanks again for your help! I'll see what I can do.
@jaykay18
@jaykay18 Жыл бұрын
@@marcs7847 Good--that's a definite clue where the problem lies. If Amazon delivers where you are, parts are easy to get.
@rodolfogomez382
@rodolfogomez382 3 жыл бұрын
Do you know why the lid switch is overload and heating, the tree wires plug can't be removed? I have cut and bypass the lid swich, this trouble can be fix with the lid switch replace?
@jaykay18
@jaykay18 3 жыл бұрын
Probably a bad connection in the connector to the switch. Sometimes water can get in there and cause corrosion, which will make a bad connection. Bad connections can overheat. You can try replacing the switch, but if it happens again, you'll need to replace the switch and the connector on the wire.
@juanmarquez4864
@juanmarquez4864 6 жыл бұрын
I might of figured out how to reset washer after the lid error code has been correctos. 1unplug the lid switch at comp board turn on and you get ul error (i beleive) power off and befor error pops up again plug lid switch back in board. "HEY, IT WORKED FOR ME" Good luck.
@jaykay18
@jaykay18 6 жыл бұрын
The machines depicted in this video don't have circuit board, microcontrollers, computers, or anything else, and not only do they work just fine, they wash better than the junk today. Save yourself the trouble, toss the whole machine and go to a used appliance store and buy one like this.
@howieb6956
@howieb6956 Жыл бұрын
The wires connecting the switch in my machine are red, white and blue. 🤔 which one is the ground?
@jaykay18
@jaykay18 Жыл бұрын
The video description.
@bryanduchane2371
@bryanduchane2371 2 жыл бұрын
Will this defeat the lid lock error? I'm not able to run now because if a kid lock problem and hope this will fix that problem.
@jaykay18
@jaykay18 2 жыл бұрын
This video does not depict, nor talk about a lid lock. If you have a machine with a lid lock, the best thing to do is to take it out to the curb since the washing action is extremely poor (they changed to a belt-driven design with an indexing tub, which is just about useless). There is absolutely no workaround or trick that you can do to get around this problem you have. REAL washing machines don't have this malarkey. The only way you can fix yours is to buy all the parts it requires and replace them, only to waste your money when the next thing breaks.
@joshcowan9677
@joshcowan9677 Жыл бұрын
Tape gets wrapped the same way you place a wire nut. Righty tightly.
@jaykay18
@jaykay18 Жыл бұрын
I'll do the enginerding, thanks.
@faithvillarreal8379
@faithvillarreal8379 6 жыл бұрын
How can I bypass the Lid Magnetic Locking Switch on a Kenmore, the wire colors are white for neutral, red for lock switch, blue for Lid switch input and yellow for switch solenoid
@jaykay18
@jaykay18 6 жыл бұрын
You can't. That's computer controlled, and it's looking for a certain signal. Best I can tell you is remove the latch piece from the lid itself, and stick it where the machine wants it to be when the lid is closed.
@jdburns1384
@jdburns1384 5 жыл бұрын
Idk
@katarinagarcia2106
@katarinagarcia2106 5 жыл бұрын
Would this work on a MVWC300BW0 ? My Maytag washer turns on, fills up at start but once it’s ready to spin and detect load size, the lid lock light blinks and makes a clicking sound over and over like if it is trying to lock but won’t! What could be the problem ?
@jaykay18
@jaykay18 5 жыл бұрын
Without my even having to look that up, no. Lid lock machines have to be repaired properly, there's no fooling them. What's the problem? The washer is a piece of junk is what the problem is. No kidding either.
@bruce7259
@bruce7259 Жыл бұрын
Will this work for the older style that’s located in the center of the body ?
@jaykay18
@jaykay18 Жыл бұрын
As long as the machine doesn't have any lights or a "play button" on the control panel, it should work.
@berryhij1
@berryhij1 5 жыл бұрын
Thank you! My washer is working now!
@jaykay18
@jaykay18 5 жыл бұрын
You're welcome.
@berryhij1
@berryhij1 5 жыл бұрын
@@jaykay18 This video was much easier and to the point than the others. I'm a disabled Veteran and can't afford a repairman or a new washer. I can't tell you how much I appreciate this video.
@jaykay18
@jaykay18 5 жыл бұрын
Thanks very much. I can't tell you how much I appreciate your service!
@berryhij1
@berryhij1 5 жыл бұрын
@@jaykay18 My pleasure. Thank you for your support.
@Phipper2011
@Phipper2011 4 жыл бұрын
Love the fact you're straight to the point - thank you @jaykay18
@jaykay18
@jaykay18 4 жыл бұрын
No problem Phipper!
@kimberlydaniels1781
@kimberlydaniels1781 4 жыл бұрын
Bypassed correctly Can I connect the other two that are connected to switch to remove switch completely?
@jaykay18
@jaykay18 4 жыл бұрын
You can replace the switch, that's the proper fix.
@Budu_27
@Budu_27 2 ай бұрын
So many thanks 🙏🏻
@jaykay18
@jaykay18 2 ай бұрын
You're welcome.
@TheShy94
@TheShy94 4 жыл бұрын
I would like attempt this on mine is it the lid lock and lid switch wires you want to split? We have a WTW5000DW1 and do you cut the wires in the back or up under the lid?
@jaykay18
@jaykay18 4 жыл бұрын
Try reading the description before you ask stupid questions that have already been answered. Congratulations, you wasted both of our time!
@troyleong7412
@troyleong7412 5 жыл бұрын
I am looking to buy a new washer....and was wondering if I could do this on the following washing machine: The GE GTW465ASNWW????? Is there a way to tell which machine you can do this to? Thanks so much Jay!!!!!!
@jaykay18
@jaykay18 5 жыл бұрын
That washer is garbage. As is every other washer on the market today. The only exception is Speed Queen, the "classic" model that's new for 2019. The general rule of thumb for doing this mod is that if the washer has a lid lock of any kind, it's not going to work. Otherwise, I have no way of knowing which washer this will work on and which one it won't. It depends on what they're actually doing with the lid switch. Sometimes there are sensors and other BS that prevents further modification.
@jesercueva
@jesercueva 4 жыл бұрын
Hi Jay. I took apart my washer and instead of grey white and green I have blue white and red. I would appreciate if you helped me out to figure out which two to splice. Thanx
@jaykay18
@jaykay18 4 жыл бұрын
There is more to a video than just the video. There's the description. OFTENTIMES, THE DESCRIPTION WILL CONTAIN VITAL INFORMATION THAT WAS NOT INCLUDED IN THE VIDEO. *ALWAYS* READ THE VIDEO DESCRIPTION!!!!!!!!!!!
@jesercueva
@jesercueva 4 жыл бұрын
@@jaykay18 I cut the blue and white wires, left the red wire as is,washer is workin perfectly once again. I won't thank you for your reply, I will thank you very much for your video. Have a great one, Jay.
@sandralyons8959
@sandralyons8959 3 жыл бұрын
@@jesercueva did you put the blue and white wire together
@UrbanSniperWTF69
@UrbanSniperWTF69 2 жыл бұрын
Thanks! Gonna wire in a simple flip switch
@jaykay18
@jaykay18 2 жыл бұрын
No problem.
@wrestling1998
@wrestling1998 5 жыл бұрын
I have a whirlpool ultimate care ii washer model number LSQ9030PQ1.. I did some research and it says to try the lid switch. ( fills up with water, then stops) I bought the new part put it in, still nothing. Can I cut the wires like you did on my machine for it to bypass the lid switch and wash my clothes?
@jaykay18
@jaykay18 5 жыл бұрын
It's pretty rare that a new switch is defective, but not unheard of. Unplug the connector, and make yourself a jumper wire and jump the pins before you go cutting any wires. Best to use a piece of wire like from a piece of Romex, 14 gauge. If you don't have that handy, for a _quick_ test, and I mean *quick*, you can unbend a paper clip. Chances are very good that if it works that paper clip will get VERY hot so be careful. If it doesn't work still, you could be looking at a bad timer. Try a different cycle, like delicates. You also didn't mention if it drains or if the motor makes any noise at all, I'm assuming it doesn't. If all of that's good, then likely you're looking at a bad motor. Sometimes the capacitor on them goes bad, but you'd hear a hum or something, which again, you didn't mention so I'm assuming not.
@billmiller7331
@billmiller7331 2 жыл бұрын
May be yoi might why the lock light is flashing on my whirlpool top loader washer and won't start or finish the cycle
@jaykay18
@jaykay18 2 жыл бұрын
Problem with the lock. This video won't help you, you have to probably replace the lock assembly and/or latch.
Fixing a Broken Kenmore / Whirlpool Lid Switch for Free
2:50
Bill Newberry
Рет қаралды 568 М.
Matching Picture Challenge with Alfredo Larin's family! 👍
00:37
BigSchool
Рет қаралды 48 МЛН
Just Give me my Money!
00:18
GL Show Russian
Рет қаралды 539 М.
Zombie Boy Saved My Life 💚
00:29
Alan Chikin Chow
Рет қаралды 28 МЛН
I Took a LUNCHBAR OFF A Poster 🤯 #shorts
00:17
Wian
Рет қаралды 8 МЛН
HOW TO BYPASS 3 WIRE LID LOCK SWITCH FOR WASHER ! ! !
23:35
APPLIANCE G.O.D
Рет қаралды 39 М.
Broken Lid Switch Washer Repair - Kenmore or Whirlpool
10:01
AdamDIY
Рет қаралды 570 М.
Washing machine quick lid switch bypass.
3:32
SMK-82
Рет қаралды 241 М.
DIY WASHING MACHINE FIX. Replace or bypass lid switch!
9:35
Try-a-DIY
Рет қаралды 172 М.
GE Washing Machine Lid Lock Disable / Bypass  by Modifying the Striker!
3:09
db's Maybe Mods & Repairs
Рет қаралды 476
How to bypass the lid lock on a Maytag or Whirlpool washer
4:13
Fix it Trey
Рет қаралды 284 М.
Matching Picture Challenge with Alfredo Larin's family! 👍
00:37
BigSchool
Рет қаралды 48 МЛН