Wow! You have way more patience than I do. What a great tutorial. Very informative. Thanks Steven.😉

Thank you so much for this informative video. I've been working on the Horizon 12000 and the Acufil system. The procedure is the same but I've only tried it once several years ago. Now I'm inspired to try it again with a quilt design other than stippling.

I bought this Edge to Edge book, too. As I worked with it, I found out that some of the designs before 2018 had to be revised because they were off by 1/4 inch. She has not told anyone this, unless you complain to them on their website that their designs don't line up properly. So make sure you buy only her books and designs that are revised, as of 2018. You can also buy stick - on paper from D.I.M.E., and print the templates, and stick them on the quilt to line them up.

Great video. Thank you sew much! My studio is in my basement with an unfinished ceiling. I have also hung bungee cords with clamps from the ceiling and have found it fantastic when I’ve quilted a larger quilt. I haven’t done quilting with my embroidery machine but I think I’m ready to try it out this month!

Thank you so much. Your demonstration and explanation on how to use the Acufil system was very clear, concise and methodical. I also appreciated the demonstration on how to place the quilt in the hoop before stitching out the next section of the design. This has now given me confidence to try again on my 500e.

Thanks so much. I plan to buy the Janome 550E soon, I will definitely get Accufil too.

A very informative video. I have the Janome 11000se. I experience a lot of the similar frustrations. I have done a couple of table runners and could see where I need to be more accurate in my placement. Excellent job in your explanations. Thank you

I have just watched your demo of in the hoop quilting. I like how you thought through the mistakes. I am wontwring whether an additional stick directly onto the quilt template when moving might make this process even earlier. Also... I am looking into a buying a small gazebo, erected in my sewing room, the canvas top removed, and bungee clips attached where needed to support the quilt. I think the quidelines in the centre of each block is essential, and am happy with the frixxion pen. A light stream ironing will remove all the marks. Thank you for an Inspiring video!!!!!

Love this video with the 15000 ready to try on mine

Very good instructions. Yesterday I watched JanomeMan from Life Janome Canada. Between the two of you I will be trying this. You may want to check out some of his suggestions for this method. Glad I came across you.

I love the bears with the moon quilt. It's gorgeous Steven. Well done. Regards, Ann.

Thank you so much!

Thank you for this video. I have a Janome MC11000. I could not figure out how to quilt with the accuquilt hoop. I feel less frustrated because of your wonderful video. I am off to do some practicing.

I have really enjoyed this video. I also have the edge to edge book and have the Janome 14000, just like the 15000 without the wifi. I also have the quilting hoop and AccuFil. I found that AccuFil only works with the 70 designs that came with the software. You cannot use external designs with the software. However, I used the quilting hoop with the small designs from the edge to edge book with success. I just didn’t use the AccuFil software. Kept the hoop attached to the machine and lined up the starting point to the prior ending point. Worked fine. Thanks so much for your videos. I have learned a lot from you.

Good stuff!

Great video. The embrilliance software has the option to print a-copy of the pattern which you can do a very similar thing you are doing with the acufil and it works for any machine. I’ve been working on doing the same thing on my multi needle. It doesn’t resize or give you an overall detail for your whole quilt like acufil does, but I think you end up with the same results. There is a free download that you could test the software.

Thank you for your video! I got more from your video than all the hours I've spent on other videos. I have a Janome S9 and based on your video I'm feeling confident I can do this on my current quilt. Quick question - would you recommend stitching in the ditch BEFORE doing the quilt in the hoop? I've seen some videos that do this but do not see the necessity. THANKS!!!!

Hi Steven, you should watch Jean truelove she does quilting on her Juki. She one of my favorites quilting ladies.

can you use other quilting designs in the aqufil Janome programme such as the edge to edge designs that you showned earlier as I can't seem to load any other quilt deigns into the programe so guess this makes it somewhat limited. Enjoyed your video Thanks Hope you can answer my question.

Loved this video, learned a lot from you. May I ask where you purchased your magnetic hoop and is it compatible with the Janome MC500?

Debbie Thompson, from Power Tools with Thread, who uses the Ameile Scott system, has a couple of great KZfaq tutorials showing her system. She does not remove the hoop from the machine when she changes the design placement.

How did you open the Amelie Scott Designs files in Acufil? I get a "Failed to create design data" error when I try.

I have the Janome 15000 which I love. Why didn’t you the Cloth setter?

Hi Steven, love your videos!! Could the Acufil system be used with a 550E? Thank you

I bought the snap hoop monster from DIME and you would be amazed at how fast you go. Not sure it would fit on you machine. Worth investing if it does. The hoop will cost you between $200 and $300 but worth every penny. There is a video.

FYI. The last 6 minutes or so, the volume is very high. You might want to adjust it. Thanks! 🌸 🌼 🌸 🌼 🌸 🌼 🌸 🌼 🌸 🌼 🌸 🌼 🌸 🌼 🌸 🌼 🌸 🌼

Why did you get rid of your Janome 15000?

Hello....I am enjoying your videos...this one was great! The problem I have is figuring out the Acufil program.....I find their instruction very confusing. Can you help?

I have her programs.

U need to calibrate your hoop so the hoop will automatically line up with the needle over the hole

Have you tried the new embroidery machine quilting designs from designs by juju

Agreed! Instructions are terrible. And difficult to find.

You need a machine that has precise. Positioning.