R-tech tig welder digital ac/dc 170 amp 240v. r-tech tig welder review and first weld

Рет қаралды 9,110

5 жыл бұрын

When MIG welder just doesn't cut the mustard anymore. R-tech tig welder digital ac/dc 170 amp 240v steps in!. there are plenty of choices on the market but R-TECH stands above them all with their customer service and value for money. this is my short unboxing r-tech tig welder review video. first impressions and first weld.
buy yours here www.r-techwelding.co.uk/tig-w...
R-tech tig welder digital ac/dc 170 amp 240v
Amperage range DC 5-170A, AC 10-170A, MMA 20-125A
Duty cycle TIG 170A 60% - MMA 125A 60%
Input voltage/amps 240v 13A - No load voltage 70v
Memory Stores 9
AC Frequency 20 - 250 Hz
AC Balance 5 - 90 %
Pulse Width 5 - 95 %
Pulse Frequency AC 0.1 - 250 Hz Squarewave
AC .01 - 10 Hz Soft, Sine & Triangular Wave
DC 0.1 - 500 Hz
Pre flow gas 0 - 25 seconds
Post flow gas 0 - 50 seconds
Start amperage Yes
End amperage Yes
Slope up 0 - 25 seconds
Slope down 0 - 25 seconds
HF Start Yes
Lift Start Yes
MMA Arc force 0 - 100 %
MMA Hot start 0 - 2 seconds
MMA Hot start amps 0 - 100%
VRD Yes - Reduces MMA OCV for user safety
Gross weight 23KG
Dimensions 438H x 232W x 550L (mm)
Insulation class IP21S
Cooling fan DC fan cooling system for quieter operation
Max Thickness 5MM Single Pass
Max Thickness Steel 10MM Multiple Passes
Digital control panel - designed for easy use - Control all parameters from a single button
- Easy start and finish set-up
- Store up to 9 jobs in memory
Power Factor Correction - What is this?
4 AC Waveforms
- Advanced Square Wave: fast cooling weld pool, deep penetration and fast travel speed
- Soft Square and Sine Wave: Lower arc noise, for a more traditional arc
- Triangular Wave: designed for thin alloys, reduces heat input
HF Microstart - improved arc starting and less interference - What is this?
Lift Tig start option when welding near sensitive electronics - Automotive ECUs etc
VRD Voltage Reduction in MMA - reduces OCV in standby for increased user safety
Full 4-way functioning with control of pre/post flow gas, initial/final amps, slope up/down
Generator Friendly - Recommended minimum of 6KVA
LED display for preset and actual amperage
MMA Anti-Stick, Arc-Force & Hot Start technology
3 year collect and return UK warranty - What is this?

Пікірлер: 27

@rtechweldingtv 5 жыл бұрын

We are delighted that you are happy with your new welder. We hope you enjoy using it. Kind Regards, The R-Tech Team.

@RuskiWeldFab 4 жыл бұрын

Thank you R-tech. i am very happy. this thing is a beast!

@butters_ 3 жыл бұрын

Send me of yours please 😁😁😁😁😁 my current ac dc welder is junk 🥺🥺🥺🥺🥺

@UnitedKingdomRC 2 жыл бұрын

Those welds are beautifully straight! 👍 Wish I was that consistent straight out of the box!

@RuskiWeldFab 2 жыл бұрын

cheers!

@smilie120 3 жыл бұрын

Machine looks great, cleared up my thoughts on the pedal / set up, looks absolutely perfect for me 👍

@RuskiWeldFab 3 жыл бұрын

Yes very happy with it.

@Dark_Phoinix 4 жыл бұрын

you can post link for the filler and detail of aluminum used and filler?

@ianfosterUSA 3 жыл бұрын

great review thanks

@RuskiWeldFab 3 жыл бұрын

Glad it was helpful!

@Markdmarque 3 жыл бұрын

Very good demo ..Thanks

@RuskiWeldFab 3 жыл бұрын

Glad you liked it!

@Markdmarque 3 жыл бұрын

@@RuskiWeldFab just bought one and wanted to see something before I used it.

@RuskiWeldFab 3 жыл бұрын

@@Markdmarque its a great little machine considering the price point.

@chloe19815 3 жыл бұрын

What sort of thickness can you tig with in a 170

@RuskiWeldFab 3 жыл бұрын

5MM Single Pass, 10MM Multiple Passes on steel

@steveh9106 3 жыл бұрын

I don't think they supply a plug for the same reason you don't get a bulb with a car spotlight, so the voltage choice is up to you, 12v or 24v, or in this case 13A or 16A, and let's face it they aren't gonna give you 2...

@RuskiWeldFab 3 жыл бұрын

you are right most likely!

@skysurferuk 5 жыл бұрын

For aluminium,, let a sphere grow on the tip.

@RuskiWeldFab 4 жыл бұрын

thank you! i try :)

@Helikopterpop 3 жыл бұрын

Thats mainly for transformer based units using pure tungsten. With inverter you should just make the 30 degree a bit blunt at the tip and the ball will create itself by just welding. So dont bother spending time on that. And the welds you did look great by the way. Just go back a little at the end and dab a little extra filler so you dont get those starvation pits. :) cheers. I got that unit in the 400A version with a ck torch.

@RuskiWeldFab 3 жыл бұрын

Thank you! Great advice