Hi folks, a bit of a strange video, I hooked up a sensor to the bikes loom and dipped it in acetone to see if it would work before removing the sensor from the bike .. I used a 1Kohm NTC thermistor, seems to work well...
Пікірлер: 26
@ESPLRG3 жыл бұрын
Thank you very much for the insightful video. My 99 R1 keeps alerting me to a fuel level sender fault so I’m glad I’ve found a solution.
@myturkishlife17772 жыл бұрын
Hi just a thought, I have just made a video about the flashing fault code on the R1 to do with the low fuel indicator, in my case it was a bad ground... I just posted the video if it helps.. Cheers
@myturkishlife17773 жыл бұрын
Quick update, took the bike out and the light came on when it should,also the display showed "F" and 0.0 this tells you how far you have traveled since the light came on , after filling up the light went out and 5Km later the display went back to normal..👍👍👍
@grosumihai9341 Жыл бұрын
for me is not working with 1k ntc but i will try with 10k ntc maybe will working.. i have yamaha thundercat 600cc from 1999
@damienmahon6557 Жыл бұрын
Hi I did everything you said and it worked perfectly. Thank you very much 😊.
@myturkishlife1777 Жыл бұрын
That's great to hear, thank you for letting me know 👍
@samdavies840415 күн бұрын
Hi there - thanks for the video. I ended up replacing the switch with a newer one.. it is a bit longer than the original so the low fuel warning will come on sooner. BTW when the bike is running are your front indicators always on?
@myturkishlife177715 күн бұрын
Hi, thanks for the comment, no my indicators are not always on, I changed them over for some "running" type indicators that have a DRL on the front indicators and a red on the rears ... In another video I changed the stock fuel tap with one that has a reserve option too, only because I was caught out before when the low fuel light didn't work and I ran out of fuel and had no reserve , so having this reserve tap is a "back up" worth doing I reckon and very easy .. Cheers 👍
@buster953822 күн бұрын
Could you please tell me what resistance will be on the empty tank and on the full one?
@myturkishlife177722 күн бұрын
Hi, I can't remember testing for this, I did test the resistance but it was open,hence why it didn't work.. To be honest if it is your sensor I would just buy some and change it over, it's pretty simple, or even connect the new sensor on some wire and dip in acetone to see if it works on your bike.. Cheers 👍
@roybm3124 Жыл бұрын
Very nice video, do you have a link where you bought the thermistor and power rating 0,25W?
@myturkishlife1777 Жыл бұрын
Hi, thanks for the reply, I think I bought them online from RS components, they are quite a common part as far as I know.. Regards
@nehuntmonitors20883 жыл бұрын
Great video, I have a 5JJ in red, it’s immaculate and I love it. My fuel gauge hasn’t worked for a few years, the fuel light randomly comes on and goes off during a ride no matter how much fuel it has. Does this sound like a faulty sensor too? Cheers.
@myturkishlife17773 жыл бұрын
Hi, yes it sounds like it's on its way out, maybe check the connector too.. Cheers
@myturkishlife17772 жыл бұрын
Hi I just posted a video about the flashing low fuel indicator, in my case it was a faulty ground, it's a new video if it helps 👍
@buster953822 күн бұрын
yamaha fuel level sensor resistance
@jordi5003 ай бұрын
Hi MyTurkishLife, thanks for the video. Is this to cancel the reserve lamp forever? or light does it work when low on fuel with normality?
@myturkishlife17773 ай бұрын
Hi, yes the system still works as it should 👍
@jordi5003 ай бұрын
@@myturkishlife1777 Yes. Then I noticed that it takes about 30 seconds to turn on the light. Thermistor stuff. Thank you so much.
@myturkishlife17773 ай бұрын
@@jordi500 no trouble at all 👍
@joerobertson2892 жыл бұрын
Thanks for sharing. I have a 16 year old Honda Phantom 200cc, it looks like my low fuel sensor has the same fault? I've ordered a Thermistor for it - hopefully when I fit it, it cures the problem? 👍
@myturkishlife17772 жыл бұрын
I hope it does for you.. these thermistors only have a certain lifespan being submerged in fuel.. cheers
@Infernum_Records2 жыл бұрын
How did you figure out it was a 1kohm NTC resistor that was required?
@myturkishlife17772 жыл бұрын
Hi, I looked online and some other KZfaqrs also used 1k ntc it seemed to be the goto value 👍
@truthsearcherforever32112 жыл бұрын
Probably didn’t even work that’s why he didn’t start the bike n took it for a ride
@grosumihai9341 Жыл бұрын
is not working , i try and wested time .. maybe other resistor ..