ShopJimmyO.com Support the build!! / jimmyoakes / jimmyoakes Send some sub mail!! Jimmy Oakes PMB 169 61 N. Plains Industrial Rd. Wallingford, CT 06492
Пікірлер: 446
@laskalives3 жыл бұрын
If Tommy only knew you were putting a Freddy intake on his engine....
@mattches_133 жыл бұрын
Gold/Yellow Sammy is right, you gots to match the Calipers
@AudibleVisibIe3 жыл бұрын
Faxxx
@AudibleVisibIe3 жыл бұрын
Hot Boi shit
@christianskater10003 жыл бұрын
Jimmy "and well" Oakes.
@jdm603jake3 жыл бұрын
Broooo I noticed this a while back you're not wrong 🤣
@TheDimeogod3 жыл бұрын
Jimmy “biggest cheat code” oakes
@gabrielgarcia32023 жыл бұрын
Jimmy “and honestly” Oakes
@christianskater10003 жыл бұрын
@@gabrielgarcia3202 hahahahahahaha
@chillythebmw3 жыл бұрын
Stop pointing it out lmao. It gets to a point where it's too much
@Azarathal3 жыл бұрын
From my 4 years of having an R33 (RIP) stay away from cheap coil packs, they’re all junk. Also with the Freddy intake get the mating surface machined flat, they’re normally all warped to some degree! Been admin on the Skyline forum for a few years so I’ll send you a PM to see if you need workshop manuals or anything like that 🤙🏻
@pikablue18343 жыл бұрын
The chinese coilpacks will dildo your engine apparently...
@samthesr20man3 жыл бұрын
Chinese coil packs fooked me doode
@X7rocks2 жыл бұрын
I just ordered an series 2 (1.5) r33, any recommendations on a turbo swap for a bit more power? And is the Freddy intake worth it for budget purpose for someone mechanically inclined? Edit: the r33 was swapped to a neo engine. Would this make it more difficult to get parts for?
@remix243 Жыл бұрын
Depends where you are, in Aus the hyperflow atr43g3sat is a great upgrade for a bit more power, capable of 400hp. You can also send in a donor rb25 turbo and they can highflow it for you
@AlaskaTony3 жыл бұрын
Donald with the subtle "I can't smell anything" does he have the coof?
@glocklesnar7133 жыл бұрын
“The coof” 😂😂
@AudibleVisibIe3 жыл бұрын
The viddy
@ryanolson67943 жыл бұрын
Dawg I had the coof and I couldn’t taste or smell for a month, but I slowly got it back and I could tell I was getting it back because my daughters dirty diapers kept smelling worse and worse lol
@Tanner7313 жыл бұрын
coof confirmed
@D0CT0RD00M3 жыл бұрын
I feel like it’s cause he be vaping those pens man I’ve got a bunch of friends who use stlths all the time & dudes noses just don’t work lmao
@zay_zxy3 жыл бұрын
Can we get this man some more subs for Christmas, crazy hes under 400k to me
@AudibleVisibIe3 жыл бұрын
Ir really is
@casomii75763 жыл бұрын
Imagine the builds when he gets that 2mil+
@Watchmedome30173 жыл бұрын
AdamLZ is selling a RB intake manifold hit him up for a bro deal lol 😂
@shona55123 жыл бұрын
He's selling one with ITBs for an RB26 though, so even with a bro discount it'd still be hella expensive.
@grant74113 жыл бұрын
And its a pos sammit china special
@Watchmedome30173 жыл бұрын
@@shona5512 doubt it.
@Watchmedome30173 жыл бұрын
@@grant7411 better than what he has now.
@Gee_w_photo3 жыл бұрын
Jimmy sounding a little regretty
@TasteLikeSilver3 жыл бұрын
Donnie “i can’t smell nothing “ boy got covid
@jordanfinlay14103 жыл бұрын
whats that mate?
@TL-Sneax3 жыл бұрын
@@jordanfinlay1410 Covid-19 aka. corona virus. Ever heard about it?
@driftspecs133 жыл бұрын
@@jordanfinlay1410 4:47
@partysharkfk3 жыл бұрын
Dj - “I can’t smell nothin.” CDC - “Homie said what..?”
@BLAzExRELoADEd3 жыл бұрын
I said the same thing
@partysharkfk3 жыл бұрын
Seems like a lot of people did lol. Thought i was quicker wit. Sorry peeps you said it first. My b.
@BLAzExRELoADEd3 жыл бұрын
Swagen Dubz I didn’t comment it but I was thinking it
@damyanovasen3 жыл бұрын
"It don't look good rolling cuz it don't roll" -words to live by
@dailydoseofboredom56913 жыл бұрын
You really gotta appreciate people like jimmy when it comes to attention to detail. Every video doesn’t disappoint when I watch how he treats even the worst of parts so.... nicely. Props.
@jerrellrice34133 жыл бұрын
A friend of mine has a Freddy manifold on his gtst(polished) and works/looks great. Just make sure the flange is flat, clean up the casting and polish/paint it and it's golden.
@ClutchKickJunkies3 жыл бұрын
stock turbos that get high flowed are good for around 300kw-400hp on e85 those turbos work best. depending what gate you use and spring in gate. ive had that set up before my current forged rb25 build. the fake greddy intakes can cause cyl 1 and 2 to air starve. ebay ones usually warped get them to machine it flat. while you had exhaust manifold out should of got a turbosmart external gate put on there or even on turbo exhaust housing. make around 440hp with that. oem coilpacks work the better than splitfires. walbro 460/ fuel pump relay. since you gone forward facing might as well go 1000cc top feed injectors. turbosmart fuel pressure reg. 3" straight through exhaust. intercooler 300x600x76+ rb love it. 2.5"-3" cooler pipes. go haltech ecu! and while you got motor out might as well do the whole timing service kit. good luck
@Pcmanx192 жыл бұрын
I've been binge watching your videos especially on your R33 RB25 build and I must say this guy knows what he's talking about. I'm waiting to receive my ER34 Skyline from Japan and I envision a build for my RB25 similar to yours.. that turbo flutter is sick, giving me so much motivation and hype for when it arrives but my first mods will be all about drivability/handling, going to be replacing all of the suspension, axles, bushings with polyurethane, bearings, control arms, repaint the wheel wells etc. to make it look fresh and once it's driving like a new car, next step will be tearing down the engine and performance time. I absolutely love your videos buddy!
@amazid523 жыл бұрын
Keep killing it bro. Cant wait to see what becomes of everything. Remember one of your first q&a's n you mentioned you don't see yourself continuing with the whole youtube thing but Im glad you persevered and i can only see good things coming your way. Stay safe and Happy holidays!
@stevebusch4653 жыл бұрын
Jimmy out here grinding twice as hard as channels four times his size 💪💪
@D0CT0RD00M3 жыл бұрын
“It dont look good rolling cause it don’t roll “
@djc28743 жыл бұрын
james going hard with the uploads thank you james 🙏🏻🙏🏻
@alexlerman17923 жыл бұрын
Donald: "I cant smell nothin" Me: *COVID*
@gabrielrosales43443 жыл бұрын
Someone get this man a test!
@jordanfinlay14103 жыл бұрын
whats covid?
@alexlerman17923 жыл бұрын
@@jordanfinlay1410 responses like that is the reason we cant go do fun shit lol
@mewsikjunkie3 жыл бұрын
I like the clean OEM look! Can't wait to see it in there!!!
@marquisethomas56113 жыл бұрын
3:01 "all this bouz sht right here" 😂
@jaydenorr16103 жыл бұрын
When your done painting hold the can upside down and spray until air comes out, then no paint gets built up in your nozzles ect
@shredct31183 жыл бұрын
Merry Christmas to you and the gang!🌲
@nat999973 жыл бұрын
I love that Turbo upgrade man. Really cool. Keep it up. Cant wait till 1 million subs.
@jack_tamales3 жыл бұрын
I love how Jimmy doesn’t go balls to the wall on every build and keeps the power at a realistic level on his builds
@Teh-Jones3 жыл бұрын
She hugs the head really nice.... Merry Christmas Jimbo and the gang!
@lucrenwick42263 жыл бұрын
Sammy right. Gold covers for sure. Would match the calipers and go SO well with the red paint.
@kayaktraveler38383 жыл бұрын
That b-roll was c- at best
@yazantuffaha70183 жыл бұрын
LZ switched his intake manifold on his rb25 so maybe he'll give you a deal on that part instead of the Freddy™
@zerohourdrift3 жыл бұрын
He was using an adapter to run rb26 ITB’s but it wouldn’t stop leaking water, and it took up too much space in the engine bay... I wouldn’t recommend it. Not to mention ITB’s are a pain to dial in
@yazantuffaha70183 жыл бұрын
@@zerohourdrift that makes sense, ITB's are better for throttle response right?, I would assume it fits better in the r33 bay but if it leaks water then yeah that's bad
@zerohourdrift3 жыл бұрын
@@yazantuffaha7018 technically yes they do improve throttle response, if you can dial them in properly, which Adam said he’s always had trouble doing. And I mean yes if it were a direct bolt on the ITBs would fit well in a 33 bay, but the adapter plate makes it hard to fit because it adds like an extra inch I think. I mean a 32 bay and a 33 bay aren’t much different width wise and they had to dent the plenum to fit it in Adams 32
@femsology3 жыл бұрын
That subtle xmas music in the background! 🔥 Happy Holidays everyone!
@fuckngreat89553 жыл бұрын
You too mate
@atheart_3 жыл бұрын
Tommy said it in his last video when him and Grant went to Jimmy’s shop they were the only ones wearing masks so yeah it’s safe to say Donnie probably has COVID that’s being confused with a cold due to the weather.
@thatoneguyclayton96213 жыл бұрын
It is what it is. He smokes the devils lettuce, he's good.
@driftspecs133 жыл бұрын
@@thatoneguyclayton9621 That has absolutely nothing to do with catching 'rona, tard.
@driftspecs133 жыл бұрын
Never wear masks? Check. Don't socially distance? Check. Have big-ass parties in the shop? Check. Can't smell nothin'? Check. You got 'rona, bud. Wouldn't surprise me one bit.
@Linkington3 жыл бұрын
whats up Jimmy! I hope you have a great Christmas! I'm waiting for my Christmas present to myself. got some of your fire merch!
@ImportWorx3 жыл бұрын
Cleaning old parts is so refreshing
@joshuaphillips20173 жыл бұрын
Looks awesome shame about the intake but you will make it look great or ball out on a real one so cool to see the progress keep it up dude lodes of hype from the UK 🇬🇧 💪💪
@mclarenjohnf13 жыл бұрын
Wishing you All at the O headquarters a Very Merry Christmas and a happy and New Year! Also Wishing Moma Oaks a Very Merry Christmas and a happy and New Year! With the Freddie Intake being a bit rough why not spray it Wrinkle Red and then have the face leveled so it seals.
@lardoretardo9063 жыл бұрын
Cool thing about the "freddy" mani is that its basically a rough casting that just needs some massaging to get right. As long as there's no voids in the casting, grab a Dremel and smooth out the rough casting on the inside and then port match it and its all good.
@xReferxify3 жыл бұрын
You can paint the valve cover the color of your R33. That dark red looks nice and would blend nice with the black you painted on the block/manifolds.
@IqpIqpI3 жыл бұрын
RB content! YES! Looks so damn good!
@lozmoss99133 жыл бұрын
This video isn't sponsored.. but Im tryin to get the next one covered 😎
@MrEminemrulz3 жыл бұрын
Those recores are making over 600 on NEOs in NZ brilliant upgrade for RB25s
@spenny2x923 жыл бұрын
my mom surprised me with a jimmy oakes hoodie. She remembered your name from when i told her i met you at h20i! Merry christmas jimmy and steph
@adammcbain88473 жыл бұрын
Yay rb stuff. Right up my alley
@runwithit74383 жыл бұрын
My favorite part of the day glad you're putting out good contents can't wait to see your car's finish put that Beamer please don't go drifting with it
@Rysgarage3 жыл бұрын
Give givers a polish they come up real nice but so glad to see the rb and you enjoying it keep it up and I luv the k24 s15 good job all of you guys
@Revo9003 жыл бұрын
HOLY SHIT HE WENT TO SPECTRUM MOTORSPORTS! Hope you enjoyed the Canadian exchange rate! Chris is the man!
@schalachi2 жыл бұрын
love to see series 1 stuff!
@BLAzExRELoADEd3 жыл бұрын
The COVID comments are impeccable
@lo91333 жыл бұрын
Gotta love the Christmas tunes in the background on this vid
@ImportJunkyz3 жыл бұрын
cracks me up all you americans finally catching up on the RB game. stever murch in NZ recores the factory rb25 turbo with holset internals for 10+ years and will see 500whp with literally just injectors fuel pump fmic and exhaust on a factory ecu with nistune chip or daughter board.
@crisvalle75183 жыл бұрын
“i can’t smell nothing” donald got the rona haha
@eleazarsanchez963 жыл бұрын
Jimmy the intake is fine, run it!
@mikeyacullo26373 жыл бұрын
I love your channel jimmmyi watch about 15 car channels. This one is my fvorit by far.
@shona55123 жыл бұрын
Sammie hit the nail on the head.. Valve covers should always be the same colour as your brake calipers. It's basic colour coding 101.
@robert_gasser3 жыл бұрын
Very nice i love that you don't try to make insane power!
@LateNightRituals3 жыл бұрын
Goin crazy w the daily uploads
@isaacberry50233 жыл бұрын
Back to back Jimmy O videos? CHRISTMAS CAME EARLY
@zyiink3 жыл бұрын
Perfect timing as I just got Maccas . Gonna rip some Billy’s and watch the best content on KZfaq
@mornelas19983 жыл бұрын
Damn I get my Jimmy oaks sweater and my dodgers hat in and then I see an upload good day today 😄
@francoisviviers35983 жыл бұрын
Nice "Hydro turbo" setup. Did it also few years back on an BMW E90 320d. The "Hydro turbo setup" got 177kw on the wheels, more then 177kw the auto transmission starts to freak the fuck out.
@cantdrive70203 жыл бұрын
Definitely get the Freddy face machined flat as they’re typically uneven and don’t seal. Also while you’re there you can always do some port matching as the freddys ports are typical smaller than the engines intake ports. Also while the engine is out, best to do a head drain as you’ll regret not doing it later
@davabran3 жыл бұрын
you should get a vapor honer because of all the resto on used parts you do. Put that air compressor to good use!
@Portorrro863 ай бұрын
Nengun sales them new for $700 with all hardware and hoses 😊. Ships from Japan so add $100 shipping. CHEAP compared what the “I know what I have” people sell them used online (typically $1000+). Greddy are available for SR20s, RB20, & RB25 applications. Hope this helps anyone.
@JustinPaul1st3 жыл бұрын
Lovely content guys....Jimmy if the intake isnt doing it for you take it off and wait till you can get a better one...who knows what issues it's gonna bring...anyways Merry Christmas team have a blessed time and keep it safe...Donny needs a check up....👍👍👍🇿🇦🇿🇦🇿🇦
@SUPEREIGHT4373 жыл бұрын
Merry Christmas yall
@evanmorgan64833 жыл бұрын
Common now jimmy you know how to make that intake manifold look good WRINKLE BLACK!
@brandoninks2643 жыл бұрын
Just in case you don't post again this week, Merry Christmas to you and the gang!
@420architecMindNDesign3 жыл бұрын
shout out Tommy for putting everyone on
@jaysonsmith96153 жыл бұрын
Spectrum Motorsports! The BC homies!
@wasabi._.86143 жыл бұрын
Yellow/Gold for the valve covers
@tylercarr10583 жыл бұрын
I'm digging that miata in the background. when will there be videos for her??
@Nick_Tank3 жыл бұрын
I like that motivational push with Sammy on DJ, y’all gotta do that to Drew and have him finish his car before DJ😂😂😂
@glanza63233 жыл бұрын
With the freddy intake you should powder coat it white so that i makes with the wheels and you dont have the casted finish on it.
@oOAstoNisheD3 жыл бұрын
thinking mini truck with xmas tree and lights. doing snownuts would be fun to see :D
@yung-qn9nt3 жыл бұрын
Get that intake checked to make sure it's not wrapped or anything. Then maybe a little grinding to smooth it out then prime and paint it. And sammy right match the brakes!
@devon50783 жыл бұрын
isr performance makes a quality intake manifold kit for the rb25 give them a look!
@thecannabiskidfortier62193 жыл бұрын
Sounds like you might be getting sick jimmy by the end of video you kinda do but hope all is well happy holidays!
@jnat78062 жыл бұрын
I hope you are loving that turbo because I just ordered one
@sparkytheskater4613 жыл бұрын
I like that u are wearing the bad luck sweater
@mikeyacullo26373 жыл бұрын
Im going to ship your guys doing awesome after xmas
@xzerohunter3 жыл бұрын
Top Shelf & Rare Parts group on FB has your needs for parts that are hard to find
@Twizz4353 жыл бұрын
Lets get those merch sales up so we can get filmer Donny on payroll!!
@adelaiderichman70523 жыл бұрын
When you take out the rb20 get a rb25 head to put on it. You can get good power out of the rb20 bottom end
@damiendoisher78123 жыл бұрын
They make high temp cast iron colored paint. It looks fantastic.
@andrew131313 жыл бұрын
cherry red, candy purple, or a clean white for the valve covers
@quitovanvliet43113 жыл бұрын
SEE YOU TOMORROW JIMMY!
@_WildSteve3 жыл бұрын
Use paint stripper and strip the coating off the valve covers, then i'll make em shiny
@gritandgears91593 жыл бұрын
Where is the water nipple for the upper radiator hose? And you should look in to the crank collar if you want it to last and be reliable.
@THELOWLYFEMEDIA3 жыл бұрын
10/10 match the PBM calipers. It’ll give that RB26 LZ R34 Vibe ⚡️
@chadillacinc3 жыл бұрын
Saw jimmy in a random reddit compilation last night with nissonda. Lol.
@f4zetw03 жыл бұрын
I ran a 450bhp fully forged RB25 (in an R33 GTR shell) and a few words of advice. 1. The rockers covers polish up really well and look super cool. 2. while you have the engine out of the car fit new exhaust studs, they are prone to snapping as standard, more so when you run more heat through the turbo. 3. wing and baffle the sump, if you are going to use the car hard you will thank me. 4. don't bother with a bigger TB that the RB25 Standard one, it is good for about 700bhp, running bigger makes for worse throttle control (I ran a QX54 - one of the biggest mistakes in my build) 5. Subaru injectors are a good upgrade for the standard Nissan items, used to be a really cheap upgrade back in the day. (standards are 370's IIRC so not enough for the new turbo) 6. port match the inlet ports on the head to the intake gasket - there is LOADS of material you can remove to improve flow. 7. standard HG is probably around its limit at 500bhp so you will be running close to the wire there. Have fun - I loved mine (I had 6 R33 GTSt all together)
@xeladaeh3 жыл бұрын
Hit up your boy LZ he has to have something around that better than that intake lol love the content boys Merry Christmas
@pppupu9363 жыл бұрын
Hybrids are common on the VW side. MQB makes 500+ easy with fuel and a redrilled housing with stronger internals.
@Awesomevideos513 жыл бұрын
You could sandblast the intake to give it a better look
@randybryant99363 жыл бұрын
Turned out so good
@Matthew205953 жыл бұрын
While its still out of the car you should get a head drain kit for it so you dont have to do it later on
@lukescully12043 жыл бұрын
Should have got a plazmaman top half intake. Split the stock intake. Don’t starve cylinder 6 with a Freddy. And you keep low end torque with the stock bottom half of the intake manifold
@bphanna993 жыл бұрын
I know you like saving money if you can I’m the same way, but you have to get the rb26 covers totally changed the look of the engine and most importantly the car!
@victorinho86733 жыл бұрын
hope LZ gives you that polished manifold he took off his r34
@davidthomas74243 жыл бұрын
Make sure you get rear turbo pipe tomei if possible extra 50 bhp
@sweettee36473 жыл бұрын
Those intakes aren't bad if you cut them open and port match the ports. Port the throttle body and smooth the inside. Tje weld it back together and clean it up.the really do work so much better