RA-Tech WE Trigger Set Review

No video

RA-Tech WE Trigger Set Review

Рет қаралды 6,817

2 жыл бұрын

Ratech Steel Trigger set - I highly recommend this one. It fixes all the issues with the trigger and it will likely never break again. Go ahead and get it. No mods are needed, just drop it in and enjoy.
Link to the next video with KAC Upgrade: • Fix THIS before it's t...
My Patreon: / josef_mucha
My Instagram: / josef_mucha
My Facebook: / josefmucha100

Пікірлер: 42

@JosefMucha100 2 жыл бұрын

Do we have more users of the RAtech trigger here? What's your experience with it?

@MKAnr1 2 жыл бұрын

yes my KAC PDW has complete RA tech trigger box. I have been very satisfied, however, the complete box from the m4 does not fit directly in, but it is quite easy to get it to do so. I have not had any problems since I threw it in, and for some strange reason it has gotten much better in cold weather than it was before, but maybe there was just something wrong with my pdw and cold weather. But what happened right at the end of your video?

@JosefMucha100 2 жыл бұрын

@@MKAnr1 thanks for the input. It's cut - it will be another video. (there are subtitles)

@TrackStriker 2 жыл бұрын

I've had the Hephaestus Steel parts installed but it didn't work properly. The hammer wouldn't drop most of the times so I went back to the original parts.

@Magnetko 2 жыл бұрын

yep i have steel trigger from ratech in my M4, i bought it with gun so on stock trigger i shot only few hundred rounds then i changed it and im very satisfied with that.

@airsoftgunswithclassicalmu8393 2 жыл бұрын

I have it installed in my XM177.

@extramile3382 2 жыл бұрын

Great video Josef! Thanks a lot!

@skallycz 2 жыл бұрын

When my KAC PDW start shooting Just full auto a change sear and Hammer for ratech and it works nice and smooth.

@theforge4591 2 жыл бұрын

i'Ve installed Ratech Products in My WE HK416, G36K/C the, My friend'S Scar-L. some model need you to trim down the trigger because of it have a different dimmension compared to original one. ratech one a bit thicker and keep the original valve locker, Usually u need to keep to use the original valve locker to make it work You can set how far you trigger reset by adding those foam tape below the trigger on the side that touch the base of the lower receiver the angel custom one is more accurate and well made imho

@extramile3382 2 жыл бұрын

Where did you buy the Angel Custom one? Thx

@theforge4591 2 жыл бұрын

@@extramile3382 a customer ordered one set from evike, and asked me to installed them backthen.

@extramile3382 2 жыл бұрын

@@theforge4591 will check evike.. Thanks man.

@Atrocious_fruit Жыл бұрын

I have one in my we scar. Got it September 8th 2022 and the semi stopped working November 6 2022. Now it has the double shot problem as well as full auto in semi auto.

@TaZ101SAGA Жыл бұрын

Mine is often firing two shots on semi and causing a jam. What's the suggested fix?

@youraveragerat1280 2 жыл бұрын

What is the inner barrel length for this gun?

@kurtalfonsejn4792 3 ай бұрын

will u gonna review the new v3 m4 WE

@slamsgt6642 Жыл бұрын

I installed the we tech trigger set, but sadly i have some issues, where the trigger is too sticky so when i pull trigger i have to push it for it to actually reset...

@JeffNowitski 3 ай бұрын

Would you review m4 WE version 3?

@fragon7854 2 жыл бұрын

Čus, používáš pořád propan? nebo si přešel na něco jiného?

@grim13reapper 2 жыл бұрын

No link in the description 😕

@aaronalienseeker801 2 жыл бұрын

Eyyyyyy 😎👌❤️

@dorinmihai2342 2 жыл бұрын

When can we expect a GBBR M4 project from you and @NOVRITSCH ??

@camataru_9874 2 жыл бұрын

Can i put a gas mag on the co2 ssp18?

@NerveJascha 2 жыл бұрын

I got the Ratech Trigger set in my WE SCAR H, got the set with the valve locker etc, waste of money, didn't work, had to use the original locker. with that it worked fine though

@theforge4591 2 жыл бұрын

its been 7 years last time I bought those sets, looks they havent change the design hahahahah. that is true, I also had to change the valve locker to the original one.

@towojtektt3948 3 ай бұрын

Whare d'you bought ra tech triggerbox?

@Splina. 2 жыл бұрын

you should check your trigger...normally it should't go on safe without the hammer cocked i have this replica stock...it works or is this because you modified the full-auto parts? :P and yes...this is one of the few RA things that are actually good...the only misery is that they are disgustingly overpriced...as always i got a secondhand G36 with Ra trigger...it was the best deal i ever had if you can get them at a decent price they are just perfect

@adrinalin5701 Ай бұрын

warum kann ich meine sicherung einlegen obwohl die waffe nicht gespannt ist. sie is stock frisch ausm kartong.

@maccumhaill5534 2 жыл бұрын

Mine steel set would not reset and is still not perfect. Had to shave a lot of bottom rear of trigger. Is this the CNC set?

@yuan9158 Жыл бұрын

Yo mine too, does your gun function normally after that?

@ianharo2040 Жыл бұрын

I heard that there are some batches of ra tech full trigger sets where they install the hammer sear backwards. So take a look at that maybe that will fix it