Race Engines Everywhere

Рет қаралды 24,644

2 ай бұрын

We made our way to Charlotte and had to stop by PME and visit with Dennis and his team. It’s an amazing shop that does amazing work. Hope you enjoy the tour. #racing #engine #power
Merchandise Available At:
claymillican.com
Big Thanks To
www.partsplus.com
www.crcindustries.com
www.summitracing.com
www.edelbrock.com
www.compcams.com
shiftsst.com
www.moserengineering.com
www.bendpak.com
www.valvoline.com
www.densoautoparts.com
www.gates.com
www.weldwheels.com
www.pedders.com
‪@CRCAutoUS‬
‪@EdelbrockTV‬
‪@Compcams1976‬
‪@SummitRacing‬

Пікірлер: 134

@thomaskimparker809 2 ай бұрын

Thanks clay for taking us throughout the machine shop. That was SUPER DUPER AWESOME . A special thank you to the shop owner for allowing you to film in his facility. What a sweet place to work. SUPER AWESOME.❤

@darrinb5249 2 ай бұрын

I second that, awesome video

@nhra7110 2 ай бұрын

Wow, what an impressive operation!

@H3110NU 2 ай бұрын

Knowing where all the engines are and what needs to happen must be a hell of thing to maintain with a couple hundred engines in the shop at once. Best shop tour.

@freechagosislandjohnpilger 2 ай бұрын

What a great bunch of blokes, super team, This is the quality us Aussies know USA can produce,

@Squintz45 2 ай бұрын

Bad Ass Shop! Would be an awesome place to work.

@brettnipps7205 2 ай бұрын

So great to see a shop full of men working smiling and enjoying their job and environment!!! What a clean and well laid out work space. Thanks for taking us Clay

@yattaran1484 2 ай бұрын

Thank Clay for taking us the tour to awesome engine shop. It always amaze me to see so many such an expert engine shops everywhere in the USA !. 😲

@stevewelborn8744 2 ай бұрын

I have worked in automotive machine shops for 40 years. This shop is on a completely different level. To do as much awesome work as they do and the shop is so clean. AWESOME shop to say the least.

@nashguy207 2 ай бұрын

Great tour. Dennis seems like a great guy. Good luck at Charlotte!

@rlh4331 2 ай бұрын

Awesome facility, clean, organized, professional. I would not hesitate to have them build an engine for me. Impressive.

@randalltufts3321 2 ай бұрын

Thanks Clay! You never disappoint. Awesome video 📹

@meladyperry3525 27 күн бұрын

The old man said every engine you put together stays in your head. forever.

@Ash_Dean 2 ай бұрын

Let's go!

@ronmedenwaldt 2 ай бұрын

Awesome shop! I'm sure there's a whole lot of knowledge wrapped up in a deal like that! TY for sharing!

@RustyWells2 2 ай бұрын

Guys like Jim are the backbone of this country!🦅🇺🇸🦅

@dksaevs 2 ай бұрын

Clay, that was cool. As always thanks for taking us along!

@joeblow5154 2 ай бұрын

Man, that was cool. Wish I was 40 years younger working for a place like that.

@thomaskimparker809 2 ай бұрын

You and me both my friend. 😢

@keithsmith13 Ай бұрын

@@thomaskimparker809 Yeah me to! I'm 65 years old and wish I was 25

@rionstretton8133 2 ай бұрын

Thanks clay awesome. From an old drag racers in Australia. And engine machinest for over 40 years. Awesome Awesome Awesome

@nonyabiz2777 Ай бұрын

Kindness is a weakness to the indecent but virtuous to the decent. The Millican family are among our most decent. Bravo sir nice work. Thank you. Stomp the loud pedal.

@jerry36852 2 ай бұрын

Thanks for the tour Clay, l used to strip engines apart and cylinder heads and a lot of gear boxes for a living in the UK 🇬🇧 for nearly 30 odd years. It just brought back a few memories. You do a lot of very interesting videos between races you are a star, 👏👏👏👏👏👍👍👍👍👍 bless you.

@jhorrocks8108 2 ай бұрын

Classic behind-the-scenes skinny. Thanks to everyone for the hard work to put this out for us! (Go Pupper Zoomies!)

@davidcarper5411 2 ай бұрын

Engines of all races, Yall..

@warbirdflyerF4U 2 ай бұрын

Thank you clay for sharing that was an amazing tour of the shop 😊😊

@chadraines5580 2 ай бұрын

That would be ny dream job working on motors like that

@letzrockitrite8469 2 ай бұрын

Thanks Dennis !

@ruger8412 2 ай бұрын

Steve Morris would be a kid in a candy shop.

@dksaevs 2 ай бұрын

IDK Steve's got a pretty nice candy shop.

@thomaskimparker809 2 ай бұрын

And growing by each video also.. new machines every time I look at his post.

@ruger8412 2 ай бұрын

@@dksaevs ya no doubt! I just see him do walk around videos on his friends shops in the industry & he looks like a wide eyed teenager everytime 😄

@bigdog2024 2 ай бұрын

Steve does much different stuff than PME but he is always respectful of the other pros in the business.

@Goldtex1m6m 2 ай бұрын

@@dksaevsyes and noo

@craigsouthern5089 2 ай бұрын

Very interesting to see. Thanks for taking us subscriber's along for the ride. ✌️👍🤙🤙😁😎🍀🍀🍀🍀🇺🇲🇺🇲🇺🇲🇺🇲

@neilchallis5535 2 ай бұрын

You gotta love a race engine shop , like a toy store for adults 😂

@wolfman3295 2 ай бұрын

Very interesting for sure. Thanks Clay and Dennis and team

@dondotterer24 2 ай бұрын

Thanks Clay!

@patrickbachman2184 2 ай бұрын

I started watching this and then got interrupted when your sister went live after Q1 and I’ve been watching that and then of course it starts to rain so I’m able to come back and finish watching this….crazy world.

@jpol3808 2 ай бұрын

Parts from a lot of the big names.... Including Clay...😮👍🏁😃 lol. Floating around in the shop. That means one thing! Quality! Great video and thanks for the tour guys! A shop to be proud of..... For sure! Drive safe! J Poll!

@thatfordguy2268 2 ай бұрын

"Long live the internal combustion engine!" ⛽️🔥🛞🌬🇺🇸💪😁

@jhorrocks8108 2 ай бұрын

Just heard a news report today, probably not new news, but in Cali they're not gonna sell ICE's after 2034. As an auto-shop instructor we need to spin-up a butt-ton of new techs.

@Goodshaft 2 ай бұрын

Working on play toys......................what a Life !

@vehdynam 2 ай бұрын

Now that is one amazing shop !! Many thanks for that most interesting and informative tour. Much appreciated. Good luck at Charlotte.

@gregsidel3557 2 ай бұрын

Clay, I wanna thank you for the video.And I wanna thank Dennis.Also for the tour You are a master.No doubt About it and your team are Masters at their craft That's why you guys are so good.Thank you clay appreciate you, Video was Fantastic thank you.

@reluhs 2 ай бұрын

I worked at PME in the 90s when Peter Guild was owner. At that time, we built motors for 7 Nascar teams. I learned from the some of the best in the business.

@BenjySparky 2 ай бұрын

Clay,you rock! Loved all them race motors. Peace

@JCx3excelmad 2 ай бұрын

😃💯Great shop and another awesome video 😃👍

@Hogman72 2 ай бұрын

Another awesome video Clay. Keep up the good work. See u in Brainerd

@roadman14 2 ай бұрын

Love these kind of videos!!

@StuartBlake-iz6rf 2 ай бұрын

This was truely very interesting seeing behind the scenes of your engine builds. great job.

@patrickjcalvey917 2 ай бұрын

I've trusted Dennis and the pme team to do 2 engines for me,totally happy with the end result's

@uslawnsnwa 2 ай бұрын

Thanks Clay, awesome tour

@letzrockitrite8469 2 ай бұрын

Nobody but NOBODY does tours like this one man... unbelieveable ! I you hadn't brought us along, Clay, nobody would ever see this stuff so... thanks so much. JonO in Idaho

@toddclark332 2 ай бұрын

PME big block twins❤clay thanks bud guys have a great and fun weekend ok later ❤💪🏼🇺🇸👌🙏 by the way grounding straps are very important❤

@richardpenner4686 2 ай бұрын

Great tour...cool place with cool parts and engines everywhere

@tools6106 2 ай бұрын

Clay slow down moving the camera in tight spaces, making my head swim! Wow!

@racecitypatriot66 2 ай бұрын

My grandpa use to do lawn maintenance at PME back when Peter owned it. Loved hearing them dyno the engines. And use to see the number 10 tide car there alot back in the 90s. We did Joe's lawn when he drove the Texas Pete and dentyne car.

@thomaskimparker809 2 ай бұрын

Ricky rudd..#10 tide

@blaketownley9947 2 ай бұрын

Thank you Clay this was a very impressive video. Keep up the great work

@poita_m7142 2 ай бұрын

Great to see behind the scenes of the engine builders. 👍😁

@davidsullivan9873 2 ай бұрын

This was a lot of fun

@claytonjohn6473 2 ай бұрын

No shortcut for experience, no wonder so many race teams use that shop.

@kennyhayes8488 Ай бұрын

Its amazing how much it changed building a engine

@Romans--bo7br 2 ай бұрын

CLAY, Man!!..... talk about a "Class Act Shop"!!! Yes, I know there are quite a few others that are "out there" around the country... like Steve Morris, Bill Miller Engineering, Sonny's, etc, etc, etc.... but, wow... just Wow!!! Thank you So Much, Clay.. for doing this "tour" and videoing it, to share with all of us "out here". In the "world of T/F drag racing" video's.... You, Are the Reigning... Supreme World Champion... No If's, ands, or buts about it!!! Stay Safe!!

@richardlincoln8438 2 ай бұрын

This is some of Your best type of content Clay. Thanks to everyone for sharing Your efforts. Best Wishes to everyone.

@kevinmoore342 2 ай бұрын

That was one of your best videos.

@Glide1992 2 ай бұрын

"What could possibly go wrong in 3.8 seconds?"😆

@jackreed3445 2 ай бұрын

Beautiful shop amazing work. It's nice to see people smiling while they work. Thank you for letting us "ride along" on the tour. Hope your runs at Charlotte continue to improve to the point of taking home a Wally. Take care, jack

@brianboys9015 2 ай бұрын

Man what a shop

@matthewjacobs2287 2 ай бұрын

I really liked this video!👏👏 I love the parts explanations and always find it fascinating how the evolution of HP and how efficient engines have become. Great job Clay!🏁🏁 #stomponthatloudpedal

@Johno865 2 ай бұрын

Great way to start my day. Good morning from Australia

@brianshannon9289 2 ай бұрын

Same as me 😂 love your work clay ❤❤ have a good day champ

@jimbristow900 2 ай бұрын

Great video Clay!!!!! Very interesting!!!

@thomasvittetoe1930 2 ай бұрын

Clay might want to be careful with music in the background, don’t want you to get copyrighted, great video

@jerrycoon3369 2 ай бұрын

Cool stuff!

@stanleymartin1613 2 ай бұрын

Cool video! Enjoyed watching ✌️ 😎

@AnthonyGriz 2 ай бұрын

That is awesome! Absolutely love seeing the behind the scenes content Clay! I'm glad you show what goes into those 3-second runs, and everyone that's a part of it.

@fordhipo 2 ай бұрын

Great tour

@vicferrarisgarage 2 ай бұрын

Awesome shop.

@gwbuilder5779 2 ай бұрын

Absolutely awesome Clay! Watching the whole team adjust and adapt from circle track to top fuel is incredible.👌 What an amazing shop!🤙

@hughstephenson2957 2 ай бұрын

That's one of them places you just leave a blank check when ya walk in 😂😂😂

@StickA-yd4fp 2 ай бұрын

That was pretty cool!

@bobbolieu9013 2 ай бұрын

Pretty cool

@stewartbennett4829 2 ай бұрын

awesome vid... one of ya best...keep it going Clay...

@Hjfvvdst 2 ай бұрын

Wow , a whole bunch of cool guys. Thanks.

@damndog8474 2 ай бұрын

I’m guessing we know why the top brass is there. Keep grinding!

@jeffjackson5331 2 ай бұрын

Very cool

@83racingofflorida61 2 ай бұрын

Wish I could afford to walk through there. 😂😂😂

@dougobrien2840 2 ай бұрын

You Know it,s good how clean the place is and organized . cheers from Australia.

@anthonygoins5800 2 ай бұрын

Welcome to the Dirty Mo

@jesset061084 2 ай бұрын

Clay needs to go see Steve morris shop

@paulvetter9265 2 ай бұрын

Thx Clay, everything you do is Awesome and great to watch. Have they ever Dynode a Top Fuel engine?

@tonygriffiths2485 2 ай бұрын

Fascinating stuff Clay. I could spend a week in there ! After watching Francis of Fasterproms I fell in love with the LS blocks, and of course the early days with Cleetus, building their own. Head gasket city when racing though. That was amazing, thankyou, and all the best in your future competitions with the Parts4Plus crew. Cheers :)

@bluecollarbuilds 2 ай бұрын

Happy Hemi Day

@OTHG6v 2 ай бұрын

Rad!

@C.V._McCullar 2 ай бұрын

They sell the old cup motors for street/strip. They made some monster NASCAR engines.

@dundas9222 Ай бұрын

Went to their website and didn't see any of them engines for sale

@C.V._McCullar Ай бұрын

You would need to contact them. There is an hour video with them explaining the engines.

@davidolds1972 2 ай бұрын

Cool..

@alkennedy1124 2 ай бұрын

Tell sis, to keep objects away from the camera 🎥 in close proximity,the auto focus will zoom in on those objects,ok thanks BigAl California,,,,

@RustyWells2 2 ай бұрын

If you live in the Carolina's I don't know why in the hell you would take your engine to any other machine ship but PME hell I'm going to look into shipping cost and see about getting my work done by them I just wished I lived down there!

@scottstorey6497 2 ай бұрын

The loud pedal comes in to play a lot there at the engine place.

@dundas9222 Ай бұрын

Damn I want that TraCo and a R07

@Timbo428CJ 2 ай бұрын

Holy Moly, that's a lot of engines !!! What a candy shop ! Here's a question for you... Is there even a dynometer that would handle a Top Fuel car???

@Romans--bo7br 2 ай бұрын

Timbo428CJ..... Yes, there are... but you would disintegrate a T/F motor, trying to turn them!! They're made for LARGE Marine Diesels.. some of which produce As much as 7,864 HP in just One cylinder. The Largest in the world is the Wartzila RT- Flex96C.. and in its largest version, an inline 14 cylinder... it develops 109,000hp and over 5.4 Million lbs ft of torque.... at a wide open throttle speed of.. 102 rpm!! The crankshaft, alone... weighs 300 Tons!!

@Timbo428CJ 2 ай бұрын

@@Romans--bo7br Thank you for the information, I would have never known or guessed that.

@alkennedy1124 2 ай бұрын

Sea sick ,,,,clay , come on brother, sea sick, wow, can’t do it right, thanks BigAl California sea sick

@Romans--bo7br 2 ай бұрын

Sea Sick???..... get real. I've watched this three times already.... my stomach is just fine. lol : )

@danpeltier1354 2 ай бұрын

cool

@xmanb8193 2 ай бұрын

👍👍👍👍👍👍👍👍👍👍👍

@robertlloyd7493 2 ай бұрын

😊

@DSRE535 2 ай бұрын

I would be in heaven in there just to have all the machinery they have to do all the things I wanna do ! you just don’t find that in the Pacific Northwest you need to be out in that area

@guyonabuffalo100 2 ай бұрын

@Maleblade 2 ай бұрын

Why not mount a camera on the rear wing that looks down on the engine.There could be a split screen showing the driver and the engine.The video of the engine could be used to diagnose problems.The exhaust from each cylinder could be analyzed by its colour.

@Romans--bo7br 2 ай бұрын

Everything going on in the engine..by cylinder, is already analyzed via the race-pac, the computer, and on the screen in Jim O's "office" in the trailer after each and every run.

@Maleblade 2 ай бұрын

@@Romans--bo7br Right, so one of the sensors went bad and caused an ehgine shutdown during a race? A camera(s) could see if all cylinders were firing and if linked to an AI overide the shutdown? How about a mop machine that wipes the track a few yards in front of the wheels after the tires are warmed up? It would remove the moisture on the track.It would be a large cylindrical mop that would spin with wheels at the ends.This may improve times, set new records.