Race Tech Part 1 Changing Gold Emulator Springs and Setting Preload on emulator
Рет қаралды 9,084
3 жыл бұрынRace Tech gold emulator valve set up and installation
@zukacs 3 жыл бұрын
sandy munroe is using same intro
@L8R2YA 2 жыл бұрын
So how do I know what spring I need of my emulator I confused
@rent2ownnz 2 жыл бұрын
racetech.com/page/title/Emulator%20Tuning%20Guide
@Gnarlys_Garage 2 жыл бұрын
So when you buy your gold tech emulator kit, you will receive a code. You will go to race tech and follow the instructions on that code. From there you will enter all the info it asks for (what you ride, how much you weigh, etc). Then it will spit out all the info you need. Fork oil weight, spring color, how much oil, how much dampening, etc. Goodluck
@L8R2YA 2 жыл бұрын
@@Gnarlys_Garage yeah that’s why I got confused I brought it not from race tech directly and didn’t get no code etc but I got it sorted in the end, but now I want to lower it so not sure if I have to change the springs again etc
@frankcastle5294 Жыл бұрын
@@Gnarlys_Garage Always wondered the same myself and installing these emulators in the tubes of my 2021 Vstrom 650XT next week. Thanks much for the info.
@flozanoj 2 ай бұрын
@frank how did your ride quality change?
Westy Crypto
Рет қаралды 6 М.
SALEM EPISODES
Рет қаралды 533 М.
Westy Crypto
Рет қаралды 7 М.
Transworld Motocross
Рет қаралды 81 М.
Will County Powersports
Рет қаралды 1 М.
SECRET SHORTS
Рет қаралды 3,2 МЛН