How Oxygen Tanks Are Made? (Mega Factories Video)

Рет қаралды 45,802

3 жыл бұрын

An oxygen tank is a pressure vessel for storage and containment of oxygen at above atmospheric pressure. High-pressure gas tanks are also called bottles. Inside the cylinder the stored contents may be in a state of compressed gas, vapor over liquid, supercritical fluid, or dissolved in a substrate material, depending on the physical characteristics of the contents. A typical gas cylinder design is elongated, standing upright on a flattened bottom end, with the valve and fitting at the top for connecting to the receiving apparatus.
The term cylinder in this context is not to be confused with tank, the latter being an open-top or vented container that stores liquids under gravity, though the term scuba tank is commonly used to refer to a cylinder used for breathing gas supply to an underwater breathing apparatus.
Video Credit: www.luxfertanks.com & www.repkon.com.tr
Join 'Engineering World' like many others to get access to special perks:
/ @engineeringworld.
Also, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel
Watch some of our other interesting manufacturing videos:
How Plywood Is Made In Factories?
• How Plywood Is Made In...
How LUXURY Rolls-Royce Cars Are Made ?
• How LUXURY Rolls-Royce...
How Jigsaw Puzzles Are Made?
• How Jigsaw Puzzles Are...

Пікірлер: 37

@ChrisWMF 3 жыл бұрын

That reverse extrusion must use enormous pressure. Also the tool must need to be replaced often if they do it cold.

@engineeringworld. 3 жыл бұрын

Good observation! Extrusion Speed, the speed at which the extrudate exits from the container, is not critical but is typically in the range 50-500 cm/min. Lubrication can substantially reduce the extrusion pressure required.

@636rahul 3 жыл бұрын

Love how they close the opening end of the tank

@maroof101mb 3 жыл бұрын

I love the painting in the end, so satisfying

@engineeringworld. 3 жыл бұрын

The whole process is satisfying. We especially like back extrusion process.

@user-vc5rp7nf8f 2 жыл бұрын

robots are kinda cute. they're all doing their job so well

@TheRedstar91 2 жыл бұрын

Imagine workers doing these mindless tasks ...

@Passion_Mission_with_PChange 3 жыл бұрын

Very details and Apply engg ; knowledge for everyone, thanks alot for video

@justanotherviewer4821 3 жыл бұрын

Oxygen tanks? CO2 gas canisters. Probably the same process.

@engineeringworld. 3 жыл бұрын

Yes, basically gas cylinders.

@totalyep 3 жыл бұрын

Amazing how they draw it from the slug.

@engineeringworld. 3 жыл бұрын

It's really amazing to say the least. The fact that the shell is made with great finishing is simply marvelous.

@EdgarKohl 2 жыл бұрын

The Rise of the machine had begun,... but don't stick your head in the middle of traffic 💀

@Shaker626 Ай бұрын

That is not 6061, aluminum does not get hot enough to glow red without melting.

@muhammadshahzad7132 3 жыл бұрын

Thanks for sharing

@engineeringworld. 3 жыл бұрын

Thanks for watching!

@byronwolf2677 Жыл бұрын

Can these tanks be bent or made round and thinner for fitment to a helmet possibly

@cristeanjuvenalzunigamaman3694 2 жыл бұрын

¡Interesante!

@darkspace3316 3 жыл бұрын

Nice

@engineeringworld. 3 жыл бұрын

Thanks

@teodorpetrushevski3214 2 жыл бұрын

Just wondering if it's possible to be made from a lighter material (like graphene) it would mean a lot

@YoungGunner360 2 жыл бұрын

No. Graphene is just one-atom-thick graphite. Graphite itself is extremely brittle in three dimensions (think pencil lead), and would crumble under even a little pressure. The whole buzz around graphene being a miracle material falls away once you take it out of the nano-scale.

@liveyourdreammedia Жыл бұрын

Not from graphen but aluminum/composite bottles are there and light a/f. But they cost big dollar.

@esomnath 3 жыл бұрын

Why are these cylinder bottoms flat? Many have concave bottoms for increased strength! Knowledgeable viewers please advise! Thanks in advance.

@engineeringworld. 3 жыл бұрын

Great question! And very good observation indeed. Requesting everyone to kindly give their inputs regarding the same.

@themechanic3239 2 жыл бұрын

Exterior bottom is flat, interior bottom is convex domed as you would expect for strength.

@KabeerAhammed 2 жыл бұрын

satisfied 😍

@shawn-the-first.1643 3 жыл бұрын

Great #gainwiththefirst

@engineeringworld. 3 жыл бұрын

Thanks :) which was your most favorite manufacturing process?

@fakhrulhasan4789 3 жыл бұрын

👍

@jttan4765 3 жыл бұрын

They dont fill oxygen inside because its in there, thats the final product

@flippert0 3 жыл бұрын

I like the thread cutting the most. Oh, it actually isn't depicted, too bad.

@nasiruddinshaikh6228 2 жыл бұрын

Address company

@sleestac69 3 жыл бұрын

About three fiddy

@engineeringworld. 3 жыл бұрын

🤔

@lcampm2 2 жыл бұрын

Co2 not oxygen