Customer States: NO ONE CAN FIND IT! Sand in my Dodge Ram! Replace Whole Unit! 1500 4x4 5.7 hemi

Рет қаралды 687,031

Жыл бұрын

Part 2: Repair Video! Axle DESTROYED! “Can’t be done” they said! Dodge Ram 1500 5.7 Hemi 4x4 • Axle DESTROYED! “Can’t...
Part 2.5 Super Secret Hidden Unlisted Video! Dodge Ram 1500 5.7 Hemi 4x4 • Ram 1500 Stuck AXLES! ...
Support the Channel with a Like and Subscribe!
Visit our Second Channel on KZfaq, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter: @RainmanRay4Real
TikTok: www.tiktok.com/@rainman_rays_repairs
Check out my Merchandise (because I don't say MERCH) for Men's and Women's Apparel, MUGS and Stickers! rainmanraysrepairs.myspreadsh...
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
Amazon List, must have for any toolbox!
Featured in Video: 18V OCTANE Brushless 1/2 in. High Torque 6-Mode Impact Wrench amzn.to/3pp7mmw
1: Astro Tools 52SL 500x2 Lumen Wirelessly Rechargeable Folding Double-Sided LED Slim Light, & 52SLC 500x2 Lumen Folding Double-Sided LED Slim Light W/Wireless Charging Pad amzn.to/3Jd2h6t
2: Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
3: NOCO E404 12.25 Oz Battery Terminal Cleaner Spray and Corrosion Cleaner with Acid Detector amzn.to/3ILbdjv
My Camera Gear:
Gopro Hero 10 amzn.to/3AaxELe
Hero 9&10 Dual Battery Charger MUST HAVE! amzn.to/3g5KdAT
Flexible Camera Mount amzn.to/3Jywrk5
#brakecleanmafia #wifeunit #rainman #comnissionearned #mechanic #technician #dealer #independent #autorepair
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Customer Customer States Mechanic Fails Engine Transmission Gas Diesel off road race 4x4 street car daily driver scam dealership dealer technician how to

Пікірлер: 1 000

@tis7963 Жыл бұрын

I used to have a buddy who worked as an adjuster for a company that insured small businesses. His workday was mostly paying for cars that fell off lifts. Kudos for the triple double checks.

@eldonhoward7925 Жыл бұрын

Wow! I cannot believe that happened very often!

@dans_Learning_Curve Жыл бұрын

WoW 😮! Can't imagine that happening!

@ROKmadness Жыл бұрын

Sure ya did

@chronovore7234 Жыл бұрын

@@ROKmadness I am studying to be an insurance adjuster, vehicles falling off lifts is a lot more common than you’d think.

@HouseCallAutoRepair Жыл бұрын

Amazing that enough cars fall off lifts, to keep this guy employed... SMH

@marceloeyzaguirre526 Жыл бұрын

Ray I wanted to let you know that I use your videos as ESL ...( I teach Engish to advanced students ) for your diction and delivery of the English language which is quite understood by my students. Your vocabulary excels; not to say your knowledge about cars. With all the "more betterer" uses which my students identify its misuse of the "superlative" for good. I wanted to complement you in all you do as a professional, and the help to all my ELS students. Keep up the good work.. !!

@viralsheddingzombie5324 Жыл бұрын

He uses correct English round these parts.

@marshmower Жыл бұрын

Correctish

@BrianTimms-tq8oe 3 күн бұрын

H66ùu

@bigjohncbr Жыл бұрын

In ireland we have those staked u joints we can knock them out file out the old stake marks and replace the joint and use a staking tool to refit . Avoiding the cost of a whole shaft replacement

@johnhhinton5473 Жыл бұрын

Yes, the *not repairable* comment had me thinking WTF!..

@overneath420 5 ай бұрын

My 97 crv had staked joints. An after market part on Amazon had u joints with the inside c clips like the serviceable shafts do. Worked for years now and made the shaft serviceable

@bascodelagamma Жыл бұрын

I’m glad to see you are feeling better after having died this past week. 👍

@larryliedner9026 Жыл бұрын

This is clone #2

@fordenginebuildersv8power184 Жыл бұрын

LOL!!

@bloodbull123 Жыл бұрын

I know I've seen videos of ghosts before, but this has to be one of the best so far!

@martyh9309 Жыл бұрын

'Twas just a flesh wound...

@loudelvis610 Жыл бұрын

It's possible this video was filmed before Ray passed....stay hard Ray!!

@pebosk Жыл бұрын

Between your work, the editing of your videos and family, when do you find time to watch so many movies with the ability to recall all the clips you use? I can't remember the TV show I watched last night...😵‍💫

@bungalowbill3409 Жыл бұрын

The aluminum that spacer is made of is reacting with the steel bolts causing corrosion, new zinc or stainless hardware is recommended or just load them up with a good anti-seize before reassembly...

@bobwilson758 Жыл бұрын

Yes , yes ,yes Correct sir ! Actually very important !

@canadiantrucker9574 Жыл бұрын

Yep, nickel anti sieze

@Robby_Mac Жыл бұрын

Shout out to the owner that is a very nicely done truck and well taken care of! Also that thing would most likely be rotted out up here in PA 😩😂

@speedfreak8200 Жыл бұрын

The off-set wheels are great for wheel bearings and other suspension parts

@Slithey7433 Жыл бұрын

And here in NJ.

@thekingsilverado3266 7 ай бұрын

The rust belt shouts out to guy a guy that don't what rust is!!!!! 🤪🤪🤪🤪🤪🤪🤪🤪🤪

@lvlndco Жыл бұрын

It looks like the owner really likes his pickup...nice to see when they are well kept.

@bongotherat Жыл бұрын

Was not expecting that many miles when you first walked up to it

@xusn9614 Жыл бұрын

Kudos to the owner, that rig is being well taken care of.

@joeythedime1838 Жыл бұрын

Agreed - 167k miles and that truck looks great.

@broken1965 Жыл бұрын

So was mine when living in Clearwater fl

@akaychi Жыл бұрын

Came here to say this. I love seeing cars over 150k or over 10 years old that have such well maintained paint, but especially that interior. Shiny shiny

@SebBrosig Жыл бұрын

Well taken care of apart from the lift kit nonsense that wilfully messes up the carefully engineered chassis and drive train to the point where a u joint fails that was designed to last.

@Ghauster Жыл бұрын

@@SebBrosig u joints fail all the time. 60k when I had to change mine out without a lift kit. Thankfully GM hasn't gone to a non-replaceable design.

@jedibooney Жыл бұрын

Always love seeing the thoroughness of your troubleshooting, Ray. It makes me wish I lived a little closer and could have you work on my own vehicles.

@ianellithorpe5918 Жыл бұрын

I love how you absolutely verify your prognosis. I wish there were more of you in the world, Ray.

@ianellithorpe5918 Жыл бұрын

Oh I almost forgot have a great day, Ray

@PeaceMarauder Жыл бұрын

Most of us like Ray are retired now :P Great to see Ray keeping up the good ways.

@issacehowardjr679 Жыл бұрын

I retired, but I think The Rainman is 100% correct on his diagnosis myself.😉😇😊

@charleskadletc2431 11 ай бұрын

Ray is the most honest, and only technican I've ever known in the world.

@PeaceMarauder 11 ай бұрын

@@charleskadletc2431 But if you see him wtih a green marble.... RUN! :P (heavy metal reference Hanover Fiste)

@billdunlop8683 Жыл бұрын

Kudos to the dude or dudette that owns that truck, Nothing I like seeing more than a vehicle with more than 100K on it and the cab compartment is as clean as when it was bought . Good job owner.

@DMT267 Жыл бұрын

Totally agree. Took the words right out of my mouth.

@Laguna28083 Жыл бұрын

It also helps they live in florida lol

@buffystclair9042 Жыл бұрын

Nothing wrong with falling in love and taking care of your second biggest investment behind your house mortgage but that’s a Dodge!!

@billdunlop8683 Жыл бұрын

@@buffystclair9042 You'll get no arguments from me about Chrysler products in general but I do respect those who take care of that investment. I can just tell if they are willing to put that much time and effort into a "Dodge" as you put it , can you just imagine how clean and tidy their home is. I would love to be their neighbor. We would have a "Lawn" competition lol.

@billgraff4809 Жыл бұрын

Your diagnostic process and skills are to be commended and, should be emulated by all mechanics. Have a great weekend with your wonderful family Ray!

@J.C... Жыл бұрын

Not a chance. He has very, bad habits that cause him to miss A LOT

@ChadwickFerguson Жыл бұрын

your taking those counter top guys for granite

@jimlangley840 Жыл бұрын

😂

@ab2230 Жыл бұрын

I posted a California Union rate sheet for those guys in the comments, $65/hr which is hilarious when you see those "what am I worth" welding videos

@ooigfgnnkhjjnc 5 ай бұрын

Granted not granite

@Jimmyky77 5 ай бұрын

The correct word is "Granted" my Friend 🤤

@fuckthisshit1367 5 ай бұрын

The two idiots who tried to correct him but didn’t get the joke what is wrong with people lol

@mikebiron7339 Жыл бұрын

Ray, my $.02 as an owner of many Rams both 1500 & 2500. The 1500's when lifted, have a tendency to have 4x4 vibration coming from the front. It's the angle of the axles and driveshaft, and causes extended wear. Once lifted and 4x4 engaged, you can feel the vibration in 99% of 1500's. Also, the parking brake cable where you noticed the wear, causes a high pitched noise when going over speed bumps or bumpy terrain. This is with it lifted or not. Simply altering the routing a bit takes care of the noise. Is that RTV on the oil pan plug bolt? LOL Hope this helps while I watch the video. Can't wait to see what you find.

@iHelpSolveIt Жыл бұрын

Having experienced lif lt kits in RSA they all have this issue and the only way I could cure that was to mod the propshafts to have a CV joint instead if the Ujoint.

@desotosky1372 Жыл бұрын

@@iHelpSolveIt Had to put a slip yoke eliminator and CV in my (not lifted) LJ to solve a drive train vibration.

@AppalachianPatriot Жыл бұрын

I believe that is paint marker on the oil pan plug. Some quick oil change places do mark the plugs after installation.

@thehoneybadger8089 Жыл бұрын

I would be suspicious of that right inboard CV joint. That was quite a bit of play.

@makellbrugger6385 Жыл бұрын

I agree, and would add to the equation the intermediate shaft that runs from the cv to the diffrential inside the housing. It is most likely just as worn on the splines as well. However, I believe the u-joint is more likely the cause of the vibration complaint. Both need attention.

@fathippo2068 4 ай бұрын

What are your thoughts on the unserviceable drive shaft? I found a durashaft replacement with a replaceable u-joint installed for $353.70. But it sucks that it needs it. Lift kit issues, eh?

@richardmacphee2367 Жыл бұрын

I had a couple come in with a buzzing sound, I took a rubber mallet to it underneath, and found the cat heat shield to the body making a buzzing sound, added a couple of zip screws to it and it went away, love the videos, keep them coming 👍🏼

@noimagination99 Жыл бұрын

Great job diagnosing the problem! Very thorough, and I appreciate you explaining your thought process throughout, excellent video!

@lloydnolan8218 Жыл бұрын

15 years ago: 94 Chev 1500 4x4. Started to notice unusal sounds. Had to keep driving it daily and the noise got increasingly worse when turning. As a self taught, backyard mech, I determuded it was the rear end. Had just had a new rebuilt engine installed and was not ready to give up on this clean truck. I got a rear end from a wrecker and changed it out. All good. When I went to put the drive sfaft back in I found the the U joints were not moveing at all. Then it turned out the the U joints had no clips and needed a torch to melt reteners from the OM U joints to get them out. Point is, that between you and Eric O, my skills to properly read noises, determine the parts needed and do the repairs pryer to failer have saved me so much money and down time. I have 3 units that are used for delivery. Thanks to both of you.

@davidcraven277 Жыл бұрын

When you install a lift kit you need to correct the drive shaft angles this cause's joint bind up under load the torque wants to drive the pinion down changing the axle causing a vibration

@lawrencelitterini4973 Жыл бұрын

Exactly., Jeep owners are notorious for this

@kennybaumann2117 Жыл бұрын

I install 2-3 6" lifts a week and the spacer like the one in this video is designed to semi correct the driveshaft angle going to the axles from the transfer case. It worked for a long time by observing the age of the kit installed so it was effective. The newer 6 and 8" lifts use the same spacer set up but are thicker at the top so must be oriented properly when installing. This not only makes up for the distance from the transfer case to the axles but also adjusts the angle by 6° making it far less prone to the issue this truck experienced.

@davidcraven277 Жыл бұрын

@@kennybaumann2117 thanks for the info

@kellismith4329 Жыл бұрын

Maybe greasable Ujoints would help - and of course greasing them after driving through rivers etc

@TheBibliofilus Жыл бұрын

@@kellismith4329 Greasable u-joints are more prone to failure due to being weaker and on this big truck with big tires would likely fail and they do require you to grease them on a regular basis or they'll fail prematurely also.. Good quality non-greasable ones are the way to go!

@chewie1869 Жыл бұрын

Aftermarket warranty company!? Run Ray, run!

@tomh.648 Жыл бұрын

My old man was a Jedi-level mechanic, and while his knack for all things automotive did not rub off on me, he did make sure to teach me a few fundamentals - IMO, the most important is the ability to be meticulously thorough (even if you're 11hrs into your 8hr shift & everything is pissing you off). That ability is the hallmark of an excellent mechanic & a decent man. Subbed...you definitely earned it.

@EyeMWing Жыл бұрын

In many cases, staked u-joints *can* be serviced - often underneath the staked cap in the yoke will be a circlip groove. Problem is, you have to destroy it to check before you know for sure, which is fine if it's *your* car, but you can't exactly do that when you're writing an estimate for a customer and parts are days out at best.

@michaelpressman7203 Жыл бұрын

Thank you I did not know that have a great day

@ToddKing Жыл бұрын

Or sometimes they make U-joint with C shaped snap rings that go in a grove on the bottom of the U-joint bearing cup on the inside of the driveshaft ears. Way back in the day GM used to inject hot plastic into holes in the driveshaft that lined up with a matching groove in the bearing cup and in the driveshaft. The hardened plastic held the U-joint cups in. We used to have to put pressure on them while applying heat. The plastic would come squirting out then the cup would pop out. There were no grooves for clips and that is the first time I saw the C rings used on the inside of the driveshaft ears.

@TheZakimus Жыл бұрын

Lol, every like 4-5 videos from you I'll suddenly have a checklist of things I want to go check out on my own truck and my pile o parts to get to one day just keeps growing

@matthewhaddon599 Жыл бұрын

The worn spline may cause the issue as it will tend to vibrate under certain conditions I would think, but definitely needs the U joints repaired or replaced.

@stevo4649 Жыл бұрын

thankyou Ray looking forward to this one,,its in lovely condition and looks to be well looked after,, the under neath looks immaculate,,well worth all the repairs,,have a good week and see you in the next one 👌👍

@noonehere1793 Жыл бұрын

Typically after market warranties are only good for the amount of sheets of paper they are printed on, as the out house is usually the only place you get to use them.

@matthewhamrick1099 Жыл бұрын

You are very correct on the subject. I have lifetime drivetrain warranties on 2 of my vehicles and they state INTERNAL DRIVETRAIN. Water pump is not included and transmission cooler lines not included. I would think they would be. However it did come in handy to have on my Chevy 2500 when the transfer case went out and locked my trans in 6th gear. I can’t remember but $2000-$2500 they did cover

@jamesstarnes311 Жыл бұрын

And so, the warranty company paid for the front driveshaft and right cv axle. They only replace broken items. So the driver cv axle which was still good came out of my pocket. I was only to happy to pay Ray for his services and I’ve been really lucky with my warranty company. The warranty has paid for itself.😊

@VTKingdomsawing Жыл бұрын

I knew you'd be able to diagnose the issue! You never disappoint!I'm not any kind of cert mechanic, but a noise like they described to you from being in 4x4 in sand would have sent me directly to uni's and cvj's no matter what vehicle I was working on. Even with my limited experience, that's the bell that was ringing! Wtf is wrong with those other dealerships and their mechanics?!! Nice vid, Ray👍

@nbk9372 Жыл бұрын

Warranty work isn't a money maker for mechanics, no commission on parts and hour allotment is dictated by manufacturers scope of work/specification.

@g3t0wNeD420 6 ай бұрын

Lame man terms he said they dont pay the mechanics enough to find out the real problems just do the work that was told to be done

@brianw4brian Жыл бұрын

remove the differential cover and look at the slop of the spider gears. I noticed while you move drive shaft the wheel reacted later than the drive shaft movement. also a pull on the tires see if the bearings are worn in differential. most issues has to do with lift kit and stresses on that drivetrain.

@jay26cee Жыл бұрын

Great video diagnosis! Really great to see people taking extra precautions. I have to say that each time I watch a vlog on YT from Florida, it makes me miss my old home down in Hallandale!

@overthehandlebars Жыл бұрын

Zero precautions were taken on the front U joint bolts because his tool did not line up correctly and you can see they are starting to round off

@jakestihl5140 Жыл бұрын

As a professional amateur off road enthusiast in the coal hills of northeast Pennsylvania, I agree with your assessment. We have coal silt up here, very similar to sand, and the constant wheel slip then traction while in 4wd will absolutely make noise and vibration if the cv and front d shaft are worn.

@kevinhill5596 Жыл бұрын

Excellent job. I believe you did find the issue with the U joints. The lift kit changed the geometry of critical components. Dodge has always had a great suspension design from the factory on their trucks.

@reloadingdontshoot1 Жыл бұрын

As someone who keeps the bottom and outside of my car clean, I have to say, for its age, that is a well kept truck. Kuddo's to the owner

@LinusScrubTips Жыл бұрын

Only a 2012 nothing special. In Florida you see 20 year old trucks everyday.

@reloadingdontshoot1 Жыл бұрын

@@LinusScrubTips As someone in Canada, where its winter 9 months out of the year, seeing a vehicle this clean is rare lol

@sulljason 3 ай бұрын

@@LinusScrubTips Ya for rust but the paint looked new and interior was spotless.

@robertsensabaugh5785 Жыл бұрын

Thanks for the video you gave really good information on how to do an inspection. I really appreciate the way you explain things in detail. It gives us guys that are not vehicle docs information needed when go to a shop or mechanic.👍

@robertsensabaugh5785 Жыл бұрын

@-RainmanRays_Repairsthanks bro!

@amywill9185 Жыл бұрын

Nice to see your mug in the beginning of the vid. Also I really like how the music starts right on the the tail of you saying “poppinze the hood” very good timing! Also, you have nearly 1000 views per hour! Wtf! Awesome. Thanks.Happy Fourth!🎉🎉🎉

@jimlangley840 Жыл бұрын

Forget the horn, I would be yelling, "Get off of the phone and drive" !

@paulburroughs1313 Жыл бұрын

I know they're expensive, but a drive-on lift would be great for your new bay. Absolutely brilliant diagnosis on the Dodge.

@Javelinjoe73 Жыл бұрын

Way better for oil changes

@7700jessie Жыл бұрын

If I had a shop like his that is what I would want to use,......... less of a headache.

@jamesbrooks5442 6 ай бұрын

I worked for 6years with drive on lifts 1 for picups and one for heavy trucks get the air Jack's for the smaller ones super handy

@IVIuffycat Жыл бұрын

Another great video ray. I had a jump scare moment as the tail shaft fell a bit when you putting the bolts back in haha

@fordsmith3727 7 ай бұрын

Love the methodical inspections budd. Hat's off to you as always for being thorough! You da man man!! Along with the triple double checks

@andrewh9629 Жыл бұрын

Yo Ray, how bout a video installing a remote operated gate opener and new wheels on that thing??

@kellismith4329 Жыл бұрын

So a nut and a bolt ?

@johnnodge4327 Жыл бұрын

I'd have expected to see a spacer for the rear propshaft too, as it doesn't look to be engaged into the gearbox far enough, it looks like it's dropping where it enters the gearbox.

@TimfromAlabama Жыл бұрын

With the lift as high as it is, and the rear axle dropping down as low as it did that's mostly just normal run out. I have a lifted truck that does the same thing when up in the air. You can see 1/2 to 3/4 inch run out from ride to lifted position on it. And since the shaft has a pretty long nose end on the splines it can take a fairly good amount of run out. I've seen as much as 2 inches run out on some lifted up a lot higher. As long as it's not out past the seal it usually isn't much of an issue. Probably what that is from what I can see on this video. At least it's not on a hanger bearing with more angle to the dangle because that much run out can destroy a hanger bearing quickly.

@AntonioClaudioMichael Жыл бұрын

I belive the cv axles and the u joint on the front drive shaft are causing the noise the customer is hearing @Rainman Ray's Repairs

@charliepreston7575 6 ай бұрын

I work in a dealership in Duluth and watch our techs try and figure out causes and cures for what ails our customers vehicles. I have come to the conclusion you have to be part engineer, part magician, and very lucky and did I mention incredibly skilled, you seem to have a bunch of all of that. You really are entertaining to educational to watch, I enjoy these videos alot.

@gregoryblack3888 Жыл бұрын

You're in for a treat getting that axle out. I work on a fleet of those generation ram trucks. The internal c-clip likes to get stuck and not allow the axle to pry out. Hopefully you quoted out the stub shaft too. Good luck and stay greasy my friend!

@brycelund4112 Жыл бұрын

I just went through this on a Ram 1500 replacing the LF axle. I ended up having to cut the old axle off of the stub shaft. Royal pain in the ass!

@gregoryblack3888 Жыл бұрын

@@brycelund4112 They can be a real bugga. Look at it this way. Should be in for a good video. Lol.

@brycelund4112 Жыл бұрын

@@gregoryblack3888 I’m sure it will.

@newjerseybill3521 Жыл бұрын

With the amount of light brown ground up steel crusties by the stub shaft to CV joint, that truck definitely needs both.

@anthonydenn4345 Жыл бұрын

Maybe that's the reason the other garages didn't find the problem. They just didn't want to deal with the fix. I really cant believe another garage would miss something that sloppy.

@edwardmalfroid946 Жыл бұрын

The beach sand here in MI will "sing" when you drive on it depending on moisture content...

@RainmanRaysRepairs Жыл бұрын

Really?? 😳

@bigbird2100 Жыл бұрын

@@RainmanRaysRepairssome types of sand will squeak in bare foot for real!

@lisas3192 Жыл бұрын

@@RainmanRaysRepairs In the U.P.'s Keweenaw Peninsula lie the singing sands of Bete Grise on Lake Superior. The sands on this beach are said to 'sing' to anyone who visits and walks the beach. Also depending on moisture content there are other spots in Michigan on some sand dunes in the lower portion of Michigan that will do the same.

@mrmustangman Жыл бұрын

@@bigbird2100 florida gulf coast sand does that

@roberts.3712 Жыл бұрын

Michigan sand does sing....from experience. EX yooper...

@cianna2813 Жыл бұрын

Now i need to go watch the movie Twister. BTW excellent job diagnosing. I can't wait to watch part 2 of this truck. Thank you Ray.

@frostbyte2153 10 ай бұрын

Love your videos to actually show what you do and how you come to a conclusion. Legit an not trying to mess with clients

@tomdevon2947 Жыл бұрын

Fun fact , you can squeal the tires on hot sand. As for the noise , you said it has a lift kit so that means the pinion angle will be under stress .

@kellismith4329 Жыл бұрын

Yes you can, also on dirt roads

@mrbmp09 Жыл бұрын

And wooden bridges.

@bigbird2100 Жыл бұрын

Great video 👍 Maybe advise the customer to stay out of sea water and prop bearings not good 😊

@kellismith4329 Жыл бұрын

Thus the lifted truck, a good greasing after encountering submersion does wonders

@johnhhinton5473 Жыл бұрын

@@kellismith4329 *After* a good wash to remove the salt!!.

@danielboyce8804 Жыл бұрын

You make the best videos, really enjoy watching you work. Wish we had more people like you in Australia

@CubbyTech Жыл бұрын

Nice finds, Ray! Funny Twister references! May have to watch that one again :)

@on-site4094 Жыл бұрын

Raymond has amazing mechanical & safety skills keeping everyone safe 👍

@Vollwurst1 Жыл бұрын

You don't necessarily have to replace the drive shaft. Many enginineer/balancing businesses are able to service/replace those ujoints. Probably turns out cheaper than a ne shaft

@thekingsilverado3266 7 ай бұрын

Those Gen 4&5 U joints are expoyied in there.. They gotta be heated and pressed out at the very same time.... Lots and lots of HEAT.... Ray Ray don't know how to work a smoke wrench yet he is a just born doing well. He just ain't got it thru skull yet but eventually he might.. I would love an all expense paid week or two of teaching this dude in Fla... I could share some horror stories of rusted busted trucks and cars with him... he might put his ear plugs in for the duration...

@billhill839 7 ай бұрын

@@thekingsilverado3266 Your a superstar😅

@LabCat Жыл бұрын

Nothing beats old-fashioned hands-on, eyes-on diagnostics procedures. Problem is, less-reputable technicians will jump to either the most expensive or most complicated diagnosis (sometimes they're the same thing...) Good job Ray!

@fuffoon Жыл бұрын

He keeps it clean. Nice. Not many people take pride in their cars anymore.

@robpeabo509 Жыл бұрын

Suspension modifications would be one of the most common forms of stress on a vehicle that would cause issues felt by the owner/passengers, more so than engine modifications. Suspension mods are something that many DYI'er installs themselves, and unfortunately there are many companies that sell sub-standard suspension kits. I am not saying that is the case with the lift kit in this Dodge Ram, it looks very well engineered, however as can be seen the Uni joint really is worn out in a way I haven't seen before. It would be interesting to see the carnage inside, especially if you don't have to return it as a core or warranty return item. I have had 4WD's since the mid 1980"s, and I upgraded the suspension on all but my first 4WD.

@kellismith4329 Жыл бұрын

Yes, my old ford ‘93 with lift wore the front Ujoint too, as well as the rear near the pinion - quite a different angle than stock

@Azlehria Жыл бұрын

My father and I've seen similar wear on older RWD cars. Combination of stiff springs, long driveshaft, and smooth roads produces very little articulation. It'd be ideal if someone made U-joints with plain bearings (bushings) instead of rollers for these sorts of applications, but these days they'd probably end up being made with plastic instead of bronze.

@Kill0rGurke Жыл бұрын

Damn this truck is nearing 300k Kilometers and still looks incredible, most cars fall apart nowadays before they even hit half that mileage lol Hats off to the owner for taking care of the car

@donstarr391 Жыл бұрын

"300k kilometers" ... "that mileage" 😂

@geoffwoodgate7450 Жыл бұрын

@donstarr391 It's because kilometeridge is a bit of a mouthful 😂

@kellismith4329 Жыл бұрын

@@donstarr391aka 200k miles

@Kill0rGurke Жыл бұрын

@@donstarr391 kilometeridge isnt really a word and i couldnt figure out what the eu pendant to mileage is lmao

@DillonTurner395 Жыл бұрын

Had a similar situation with my brothers jeep. 05 5.7 hemi. Front driveshaft has this weird cv joint in it. He said he had a popping going down the road and no one could figure out what it was. I crawled under it, joint looked fine visually, didnt have any slop but what it did have was it felt like it was on fire when I touched it. Disassembled it and found all the grease had became powder. Greased it back up and it was fine. He didnt have the money to replace the joint at the time. He drove off in it and a couple days later trans went into limp mode cooked itself and shot fluid out the dipstick. Guess who ended up with the blame some how lol Gotta love those people that blame you cause you were the last one that touched it.

@bubblezovlove7213 Жыл бұрын

I don't even like cars in the slightest but I do love fixing things, taking things apart and evaluating so I enjoy these videos..... 😊

@kermanp Жыл бұрын

I wonder how can a "professional" mechanic not catch those kind of problems. I believe such wear and tear of componenta isn't too hard to find out if one puts some effort to diagnosis. Nice to see that you take the time and actually check if stuff is in good condition. Great job Ray, as allways.

@donfayetteville3582 Жыл бұрын

key word-- professional. how many have you seen?

@kermanp Жыл бұрын

@@donfayetteville3582 Quite a few... Allso many not so professionals :)

@donfayetteville3582 Жыл бұрын

@TiffanySmith-ed2lj I know hes not the only. After reading thousands and thousands of post here from customers== Tiffany there just aren't that many great mechs. As a mech for over 40 years and having worked with 100's and hundreds of mech's my life there have been maybe 20 that were the golden goose's. (no I was not one of them) but I knew who they were. So did the other mechanics.

@erlejomo Жыл бұрын

Professional doesnt mean a thing

@donfayetteville3582 Жыл бұрын

It means everything. do you want a professional red flyer wagon mechanic working your stuff? 70-100 pick up truck deserves more the the red flyer guy.

@riggins44ful 20 күн бұрын

Love your videos man, I find them fascinating..... thank you

@720MotorWorks Жыл бұрын

The i4 in Orlando clip is so true😂 all its missing is construction everywhere lol

@YaksAttack Жыл бұрын

It's crazy (but not in believable, unfortunately) how the customer can take this to multiple separate mechanics, and none of the other guys are capable of giving this truck a 20-30 minute shake down like you did and find any of the obvious faults like you did.

@Jack-yl7cc Жыл бұрын

His "shake down" took a lot longer than 30 minutes; my guess would be a good solid hour. Which is why those other shops never found the issue because they would have taken it for a 5 minute drive, checked the ball joints and u-joints by hand and then said they couldn't reproduce the customer complaint after about 15 or 20 minutes tops(which includes the time it would take to put it on and off the lift).

@michaelpressman7203 Жыл бұрын

It takes thought & time to make an accurate diagnosis.

@joshuas390 Жыл бұрын

@@jshowao-rw1dh no, but you make a lot more money for being a trustworthy mechanic with return customers.

@killerredduck7820 Жыл бұрын

Someone is super defensive. Did you work this dodge personally before Ray did? Lmao 🤣🤣🤣🤣

@znk0r Жыл бұрын

@@joshuas390 you don't make a living that way. It's a different thing when you can make money making a video about it. You don't have to charge the client an exorbitant amount.

@FortunateJuice Жыл бұрын

Now if only there was an F5 to drive it into.

@redraider7876 Жыл бұрын

omg love the twister clip. wasn't expecting that. it is my favorite movie

@michaelbradley-yorath9682 Жыл бұрын

Scrolling down I noticed you have recently passed, So sorry about that but you appear to be handling it very well and it is such an encouragment to the rest of us. Your videos are great, thanks

@davidrasch3082 Жыл бұрын

Would Ray show his video of inspection to customer if asked?

@Aleks_Mechanics Жыл бұрын

Notification SQUAD! Have a nice weekend!🔥🔥🔥

@savyconstruction Жыл бұрын

Dam. For 165k miles that truck is in great shape.

@blackenigma1054 Жыл бұрын

i’m always curious, usually dealers are extremely expensive so how is it that they couldn’t find the problem?

@peterrenshaw9237 Жыл бұрын

because they are all mechanics with government certificates with no experience of being a mechanic and a manager whos wages you are paying for and no experience of being a mechanic

@fredgarvin4482 Жыл бұрын

They probably like to be quick as possible. More tickets=mo $

@captainmanic1959 Жыл бұрын

I went to the Ford dealer three times over the A/C in my Taurus blowing only up on the dash. Three half-assed attempts later and looking at 1200.00 to remove the instrument panel, I took matters into my own hands and figured out how to make a lasting repair myself…for one hour of my time and 13 bucks!

@michaelpressman7203 Жыл бұрын

Just because they charged good money does not mean they do a good job have a great day

@mrbmp09 Жыл бұрын

Because they hire mechanics that just throw parts at it till fixed. Dealer makes money on every part.

@realeyesrealizereallies6828 Жыл бұрын

Nice looking truck, but looks can be deceiving, as the saying goes...Get a Tundra or Tacoma, and you won't have to worry about such things, but, to each his own..Oh, not the brand new Tundra 6 cylinder with the twin turbo, you don't want that..The standard 8 cylinder with no turbo, will last forever...And the Tacoma is probably the best truck ever mass produced, on my third one, and well over a million miles added together, with very little maintenance.. My wife has had the 2001 Lexus 300es and the 2003 Toyota Avalon, which is really the same exact car, made in the same exact factory, going on 700 thousand miles added together.

@forthefunofit5487 Жыл бұрын

That guy takes nice care of his truck. Thanks ................I love your channel.

@andyny29 Жыл бұрын

At 2:40 “I-4 in Orlando” is so true! 😂😮😊

@hillppari Жыл бұрын

nice red rtv on the oil plug. also those non servicable U joints are a crime. should be banned. so fun when need to buy expensive shaft when only the cheap u joint went bad. could always cut and weld a new one

@KAKAFU Жыл бұрын

needs more on that plug .. lol

@hughmacfarlane9662 6 ай бұрын

One thing I did notice is that you are wearing a marriage ring . Do yourself a favour and leave it at home. Over my 50 year working life, I came across quite a lot of fitters with missing fingers due to accidents with finger rings.

@elihusmails7401 Ай бұрын

I knew a pilot who lost a finger when he got stuck while preflighting and slipped.

@rogerd4559 10 күн бұрын

I used to work on generators, and too my ring off because working around high voltage and electrical circuits are not a good idea with a ring on. The high current can fry that finger right off

@blkshk1 Жыл бұрын

Excellently lit and excelleny spoken video! Best yet!

@silicon212 Жыл бұрын

Ray is on it with the GTA memes today! The I-4 in Orlando sequence was hilarious too. Could also be I-17 in Phoenix.

@damionrichter Жыл бұрын

they are street trucks

@TheGoldenTrout Жыл бұрын

The two best things about this video are that 1) for a vehicle with so many miles it looks very well taken care of, and 2) it's being driven by a zombie. Can't ask for much more than that.

@andrewholdaway813 Жыл бұрын

Lots of polish and tyrewall black - not much else.

@TheGoldenTrout Жыл бұрын

@@andrewholdaway813 doesn't matter, still looks cleaner than a lot of trucks with that many miles.

@kellismith4329 Жыл бұрын

@@andrewholdaway813ya wouldn’t be my choice for that type of vehicle, must be rough riding

@andrewholdaway813 Жыл бұрын

@@TheGoldenTrout It is a lot cleaner.

@johnsmith-xr6qy 24 күн бұрын

RAY, I am in shock! You actually have two hands! I saw them both at the same time! AAAH! I don't see how yo work, film & talk at the same time. Having the video of the inspection should be an awesome tell for the owners.

@jeffboyer8214 Жыл бұрын

Nice Drive line diag. Get permission to take the truck home and you have sand there . But the drive shaft is not repairable sadly and the cv shaft is the Hum or buzz I bet they like to spin on the splines when they ware down. Be safe all.

@user-sl2qb8zx5j 10 ай бұрын

Love your work Ray.It's hard find an honest mechanic these days.. Kudos to the owner, that rig is being well taken care of..

@redragn72 Жыл бұрын

Good video. And love that two XJ's showed up!

@derekhobbs1102 Жыл бұрын

Staked uni joints, even professional driveshaft rebuilders won't touch them in my state. I've freed them up with careful hammer application.

@puddleduckist Жыл бұрын

Great job as always on d dooodge!!!!🎉🎉

@greasee.monkey7224 Жыл бұрын

Good diag Ray. I hate dealing with the aftermarket warranty companies, but I understand why you would as a business owner. Good luck on selling the job sir!👍👍

@desotosky1372 Жыл бұрын

My FIL purchased an aftermarket warranty years ago. When he tried to use it the company was out of business.

@Sir_Uncle_Ned Жыл бұрын

Expert diagnosis like that is why people seek you out. Lesser mechanics would just parts cannon things in the steering, but you found the worn U-joint rather quickly.

@Drekulviin Жыл бұрын

📯 Honk for safety Ray, what are you doin'. 📯 😂 22:54

@awshortclips Жыл бұрын

@2:41 Spit my coffee out on that one! lol...I think that's a very accurate description of the constantly-under-construction I4 in Orlando.

@johnharrell817 Жыл бұрын

Rule of Thumb, Do Not over stress the Ram drive train with 4" + lift kits. It is built for stock set up. 2004 2500 HD 4 W, with 388,000 miles on and never have needed any more lift.

@jamesstarnes311 Жыл бұрын

Hi, I’m the owner. It’s a 3 inch lift front and rear from Mopar. Everything on it is Mopar for the most part.

@mikedoblo4782 Жыл бұрын

had a similar issue on a jeep cherokee thing it was the drive shaft with the splines. there was no splines left on the main axle and the cv axle

@thomasfx3190 Жыл бұрын

Good call, splines are certainly worn on the right front. I’ve seen splines do weird things, old VW busses had splines on the brake drums and when they wore out on the left side, the van wouldn’t move.

@SteveB88 Жыл бұрын

That little clip that you mentioned i4 in Orlando is right on. That’s exactly how it is.

@scotthassett2676 Жыл бұрын

great to see something different and chalenging. My car made a buzzing sound in sand when the wheels where sliping, it was just normal traction control computer doing its thing.

@Streamer687 4 ай бұрын

You took me back over 20 years with this video about driveline noises, thanks RAY for making me feel young again :)

@bulldogshouse9970 Жыл бұрын

What a great video keep up the good work

@josephgolden1868 Жыл бұрын

After living on some of the country roads here in Michigan, some of which have a fair amount of sand, it is probably the tires in sand causing the noise. Experienced that on some occasions.