Pro tip. When you get the plunger in and are applying pressure go on the inside take a lighter and apply a little heat to the spot. This will cause the resin to suck into the cracks. I had a professional glass repair person tell me that. I did it with mine and it worked great. Thanks for the video.

I sucked at reading instructions when buying a product and I prefer watching videos lol. Thank you for this!

I did my repair on a cool (55°F) but sunny day and here’s a tip that helped me: I cleaned the windshield with rubbing alcohol, then left the car in the sun for 30 minutes to make sure the alcohol evaporated and to heat the windshield up a bit. I then moved the car out of the sun into the carport and did the repair per the instructions. As I slowly turned the pressure driver, I watched from inside the car as the resin seeped into all the little cracks and crevices of the damaged area. I think pre-heating the windshield helped the resin flow easier.

Great video. Repaired a chip in my windshield this morning that I had been quoted $109 for by the local Safelite glass repair company. Was told each subsequent repair would "only be $26.00" $11 for the kit from the local auto parts store and 30 minutes later - chip repaired.

Good step by step video. I had surprisingly good results with this kit. Took a nickel size whitish mark on the window down to a barely noticeable distortion in the glass. Saved $120 vs going to a window repair place.

Hey man this is the only good video I’ve seen about fixing a windshield chip. This was really helpful and well-narrated and I appreciate you taking the time to post it!

I can see you are a perfectionist not only by the way you did the repair but by the way you made this excellent video! thanks a lot :)

I just got a chip today too! was devastated about it. Thanks for the video man it alleviated my anxiety to know that there may be a diy fix as my chip is about the same size as yours

Just to say thanks for the video. With admirable determination I've waded through a whole selection of videos on repairing cracks on windscreens using Rainx and have shown considerable maturity and restraint by not leaving comments on most of them. So it's nice and refreshing to find a video which is both easy to follow and instructive and one where I can actually leave a comment which doesn't get a restraining order. Mike

Special Mention - Thanks for showing the part where you clean out the excess damaged glass fragments with a razor blade. Soooo many people forget this very crucial step!

Thanks for your vid! Just did this myself. I had a bullseye and 3 small spider cracks. Was quoted $60 for the bullseye alone. The Rain-X repair kit cost me $12 from WallyWorld! And I have enough leftover to use again if needed.

A big thank you for making this very helpful video! The RainX fixed the "star" back to 95% condition and I am very grateful to have fixed it myself.

Thank you for the very detailed how to video. It made my life much easier filling in my windshield crack. Really appreciated, thank you !

Thanks for the in depth tutorial, got a nasty small crack today. Gonna fix it right up tomorrow.

Followed this video for a chip I had on my windshield and it worked! looks good

I'm watching this rather than read the instructions clearly executed good job ...

I watched a few videos on using this but your video was the most accurate and informative, thanks

Well done mate. Best video i've seen of anyone using this kit and your further applications by hand show the damage can be improved even more. I'm in the middle of repairing mine right now and just waiting on the 1st curing process! Edit: I noticed that after applying the drops into the pressure screw thing, if i tapped behind it on the inside of the windscreen continually, with the ends of my fingers, the resin spread throughout the tiny cracks that were coming off the initial chip. The more I tapped the better the resin spread within them. My chip has been sitting there for at least 6 months so it would have been better if I had done it earlier, but it has turned out perfect!

Thank you sir, I appreciate this video. My chip is not as bad as yours was. I'm mostly doing mine as precautionary to fix it as opposed to letting water get in there and then freeze potentially doing further damage during the winter. I liked and subscribed as I thank you

Nice demo, just did this myself. Mine came with about 15 of those plastic strips so after I took care of the initial crack, I took care of about 10 of those small rock chips by just using the resin and plastic. It was a LOT of razor blade scraping but the windshield looks a lot newer because of it. Thanks!

You did a better job than a professional company did with mine!

Even if you use a professional service, chipped glass will never be 100% the same as it was before. That turned out pretty damn good considering. The resin is meant to strengthen the glass moreso than anything else.

Thanks for your video! Watched before I attempted in the morning before returning a car rental. Got a nice almost dime size bullseye chip with a couple tiny arms coming off it when driving on the highway. I was able to do it in 10 min while vacuuming dog hair out of the car, prior to dropping the car back! I didn't even finish the scrapping process, but it passed the rental office visual inspection!! 😊

great video and instruction.. and no music! LOL Thanks for your time. I had Halfords do a 'professional' job on my last VW.. I naively expected it to disappear... It doesn't and it didn't. Your efforts were better. The extra time you put in made it a lot better. Thanks. I ordered a kit to put in the car.. you never know when you might need it.

Thanks, Bought it, used it, not perfect, but did an excellent repair. Now we will see how it holds up👍

I had two cracks that looked like fly sticks on windshield. I fixed it by watching your video. Very well explained. Thank you !

Available here for only £9 amzn.to/2UaIIlI ebay.us/RsunfI *If this video helped you please consider a "Super Thanks" donation as a thank you.* 😁👍 See my Tyre Valve fixes video here: kzfaq.info/get/bejne/b7V0npCnrdq-fJ8.html

Thank you! I've subscribed! I do want to make a suggestion here, I think that you could have gone with four, or maybe even five, drops of the resin in the beginning, and that would have made the final blemish practically invisible. Thank you for the lovely video, it really was very informative.

Hello Dave, I followed your instructions, and it worked perfectly chip has gone and the spider cracks faded, making a saving of £190.00, the rain -x cost me £10.00, thanks for sharing Best regards - Pete.

Thank you for taking the time to make this video, this was very helpful. I was able to “almost”remove the cracks, there’s a tiny bit of a dot on the windshield that can only be seen by me.

So glad I found this! I cant believe what a professional wants for a small chip! I just want mine fixed because I believe It made it through the outside surface and I get condensation in my windshield on cool mornings and nights and have to crank up my defrosters to clear it up.

Just did mine perfect result with applying lighter heat from the inside of the car to the resine helped a lot applied the resin twice

Thanks! I have been putting off doing my chip for months now because I was intimidated by the process! Seeing it makes this much easier to understand! Here goes nothing!

Thanks for uploading this. Only problem was 3 minutes in and I already have had 4 commercials.

Just got mine from Asda, glad there is a vid here demonstrating what to do!

This worked well on a bullseye on my new Honda, but it was only partially successful on a 6 inch crack on the other side. Still better than replacing the windscreen.

Beautifully done . Thanks for the video You are a life saver saved me atleast 3000 rupees

Thank you for posting this! Your video has helped me.

Thanks for the video! Mine got chipped last week and I had to wait for a sunny day before attempting to repair this myself. Unfortunately its not warm out though so it may take longer for the resin to setup. I'll have to use a lighter from the I side I'm sure to make sure the resin is getting sucked into the cracks. Thanks once again.

best guide on you tube for windshield repair

Great vid, very thorough will try that now!

Wow thanks. I'm going to give this a go tomorrow! Interesting how it worked better when you put more of the resin 3rd time without the sheet overtop and not even put back outside

Well done and thanks for uploading. Bout to go try this myself. Great video!!!!

THE BEST TUTORIAL! Thank you! 🎉

Thank you for the demo.

Well demonstrated..impressed with the repair..Thankyou.

Good video, very helpful. To get a chip to 95% is exceptional

Excellent thank you!

Fantastic video tutorial! Excellent product!

Cheers pal i wanted to know how good this was cheers for that very interesting video! 👍

I drive the highway daily and get several small chips per year. Nothing that really bullseyes out most of the time but I may have to keep one of these in my car kit for the hell of it.

Good video, did a very similar thing on mine today with very good results, thanks!

Thanks for the video - your repair came out looking good.

Thank you for this honest video

Well done, Thank you. Nice truck...

Cheers mate, gonna give it a go 😎

Excellent review, thank you!

Thanks for doing this video for us... help me a lot..👍

Excellent Demonstration. Thank you from Pennsylvania!

Thank for the video your direction was great 😊

lttp, good vid! Doing my windscreen either today or tomorrow and will have you playing alongside me :)

Very detailed video. Thank you. Worth taking the extra time that you did to get that end result

even after 2 years of a chip I managed to fade it out with a preventive digging with a needle and cleaning with alcohol. It took me more to prepare the place. Now it is barely visible but at least I know I've sealed the cracks and no more water and dust will get in there. Thanks for the video...

Thanks for that, will buy one tomorrow!

Good informative video..gonna try the one I bought over the weekend..

Very professional presentation. Very helpful.

Very useful video, hope my chips will look as good as your work. Cheers

Nice vid mate thanks deffo going to be buying and following your steps

I did one this afternoon with a cheap kit,worked 100 percent. Didn't follow the instructions either, sometimes you just got to ignore the instructions and do it as you think is best.

Great video man thanks

Definitely some things I've missed when doing mine. Like taking time with the resin, and then going over it again after releasing any air bubbles from tapping on the inside. And I better buy some blue tape tomorrow so I can see it better.

Thanks for the info. keep it up!

Thanks very helpful instructions!

Good video. That said I have to look at the other products. You have some helpful comments below from others. Good job

Good point about the window tint!

Good honist review. That's more important than the results

excellent guide, thanks

Very helpful! Thank you!

Great attention to detail

nice one mate cheers

I used it and it worked for me

Wow, this stuff works great!

Glory to God for this video, almost paid $140 for a repair :P thankfully your video is very well made/informative. Thanks, m8.

Very impressive! Good job!

Great precise vid,,no fluff or selling spiel

I’m surprised this worked... I have a chip in my windshield. I don’t mind it but I did wanna fix it eventually but heaven knew I wasn’t gonna spend lots of money getting a small chip on my Windshield replaced. Knowing this exists. I might just have to try!!

Thank you very much Sir!

thank you very much for thar in detailed honest review

Good for the cost of the kit for me solves a lot. I paid $118 to have it repaired and it's the same as with the $10 rainx kit... it's a good option

Wow, is that a diesel truck? Wasn't expecting that. I'm going to try this product tomorrow on a 2017 Toyota Prius and a 1997 Ford F250 7.3 Turbo Diesel.

Good job Dave! Cheers 👍 Now waiting for a sunny day 🤷‍♂️🤞

Our stupid insurance company in British Columbia called ICBC will not permit professional glass companies to repair glass like you just did. They will only pay for new windshields to be installed at huge cost. Crazy! Your demo was great! I am surprised RainX does not pay you to do one for them so they could put on the printed directions. Good job!

top tip: when travelling behind bulk haulage (tipper) trucks, leave a good 30 meters. When I drove tippers and was paid by the load, it was always a quick sweep of the back door plate and any excess stone just fell off onto the road (then bounces up onto following cars windscreen) on the way to the next job ;)

Very good i will give it a go bought this at asda today

Cracking video mate..

Super helpful 💯🎯💪

I had mine done professionally and yours looked much better then mine did. It’s your tint difference is why you barely see it. Nice job! My windshield had condensation inside every time it rained , it wasn’t done correctly.

Thanks for the vid, was a great help, I have just used the rainx kit and it filled the chip but I can still see it, it's an old chip and was full of dirt which I struggled to remove, and also I suspect somebody has tried repairing it it before as I had to pick out some old resin with a needle. But my question is, once I have done the repair can I redo it and is there anyway of getting the crack completely clean? Thanks again.

So needle and thread! Lol what about 5 inches crakes, remove ant clockwise! I love you Brit's the way you all talk

Used this today on a 3/4 year old chip on my windscreen,I can't believe the difference. I've just done the final stage of dabbing some on ,but even before that you really couldn't see where it had chipped