Rancher 350 Project Finished!!

Рет қаралды 75,726

7 жыл бұрын

It was a fun little project to get ready for this coming weekend for Mud Jam 8. Hopefully have some good video and get into a few mud holes with it. Well see how well I did for it sitting for 6 years.

Пікірлер: 115

@chrisgarcia5855 2 жыл бұрын

That thing is badass!! I’m definitely doin that to mine!!

@MegaMIIKKEE 7 жыл бұрын

That's dope bro I use the same exact quad that's motivation to make mine like this 🔥

@Richard-gy1fo 4 жыл бұрын

Nice clean work area.

@SwampAss 7 жыл бұрын

Looking good! Maybe I'll see you out there at Mud Jam. I'll be heading out there tomorrow after work.

@irishginger6887 6 жыл бұрын

Swamp Ass what time of year and where abouts is mud jam

@bryanbearsley8456 2 жыл бұрын

wow your 4 wheeler looks nice. my uncle has the same 4 wheeler you got, his is a honda too. i like the electric shift 4 wheeler's. honda's are awesome. i like your 4 wheeler so much. very nice

@tonyhall98 7 жыл бұрын

damn that thing is sharp , can't beat Honda

@jeffreymoran6234 4 жыл бұрын

I have one with 786 miles on it, I have 2 inch lift, outlaw tires,I keep up with the big boi's on that 4x4 ES 350

@joshuabeanblossom8371 3 жыл бұрын

@@jeffreymoran6234 do you have a gear reduction?

@FarmallFanatic 4 жыл бұрын

Love my 350!

@loganbeddard7969 5 жыл бұрын

Looks great brother I prolly woulda added axle paddles

@singlepistonproductions3232 5 жыл бұрын

Picking up mine that looks exactly like this but it’s been sitting for 8 years

@fivehigh4718 6 жыл бұрын

how'd that front end hold up with those big tires? looks good, my bike, wore the bering seat out with big tires, Bering slipped in the race wore it so it didn't press in tight. mine is a 350 also. Heavy mud runs kill them poor fronts with big tires.

@obspowerstroke1864 4 жыл бұрын

I’m wanting to do a fo-4 or fo-14 exhaust on my 02 rancher 350 what do I need to carb for it to run good ? Jet sizes and it has a 2” snorkel on it already . Or can I just run exhaust and leave carb alone

@dantaylor513 4 жыл бұрын

What did you do about the water in the motor when you got it? I just got one for 100 bucks has water in the motor told me smoked when they pulled the front plastics and seat off. I like your bike that's the look I'm going for

@davedaniecki4189 5 жыл бұрын

Does that exhaust long pipe do anything to your power? Is that strictly for water riding so it's not submerged? Thanks

@geemtz8025 7 жыл бұрын

Do u need to re jet the carb if I do exhaust and uni filter?

@johnny3eyes900 7 жыл бұрын

👍🏻

@thomasfritts5724 6 жыл бұрын

Did you have to jet the carb with the tractor exhaust ?

@obspowerstroke1864 4 жыл бұрын

If I put a f0-4 or fo-14 on my Honda rancher 350 do I have to jet the carb or can I leave it alone ???

@drummer4hire 4 жыл бұрын

I love old hondas ,but am a fan of the stock look not the crazy snorkle and exhaust. Looks good though minus that.

@davisprice8272 6 жыл бұрын

What brand are the disk breaks I have some of SuperATVs on my 300 and they do not have good pressure at the lever How are the ones on the rancher and do you know of any tricks to make mine better iv bled them several times and it doesn’t get better

@Sh3wuz 5 жыл бұрын

Did u do a gear reduction?

@hardr7194 6 жыл бұрын

How did that fo4 without the exhaust snorkel I want something for my Suzuki that dosent sound like it's farting 😂😂 but it already has a muffled sound but

@christianhall9228 3 жыл бұрын

Yea I’m wanting one I think I’m getting one that is yellow

@michaelgorniak4257 7 жыл бұрын

What is the PVC you need for the snorkel

@brettknowles7447 3 жыл бұрын

I'm curious what size lift you got on there

@XxNANOSHIFTxX 4 жыл бұрын

pulls good in mud with 28’s and no GR?

@preyforapophis 3 жыл бұрын

What is the offset of those wheels? 2+5? Standard SRA rear wheels all around?

@bradyriggs528 7 жыл бұрын

How did you seal gas cap?

@fred2845 6 жыл бұрын

Them Hondas are the best ATVs you could buy I had one a couple years back I beat the ever loving dog shit out of it I replaced every plastic an on it I can’t complain about Honda From the radiator being jammed with mud to being rolled over to being almost ran out of oil it took a liking and I finally just got rid with a rod knock probably had 12,000 miles on it

@Solitude313 6 жыл бұрын

Yea this Rancher has done some things that surprised me completely. I love Honda's and just bought one this weekend.

@tyeneedham5752 2 жыл бұрын

I have that and mine was sitting at my cousins for a long time and the carborator and brake lines weren’t working and it has a lot of stains on then motor part by the foot breaks how can I get them off

@shevonnel9806 5 жыл бұрын

just wondering did you have to rejet the new carb and if so what did you use ? Doing the same build on my 2000 Honda rancher

@Solitude313 5 жыл бұрын

I did tweak it a little bit. Mainly with the Needle and A/F Screw.

@bradleywalls2992 4 жыл бұрын

So did you not re jet the main or pilot jet?

@davidb5260 2 жыл бұрын

What website besides eBay do you use for tuneup parts?

@daviddavis2321 6 жыл бұрын

What is your secret on bringing back the life on the plastics. I think you did a real nice job on the bike.

@Solitude313 6 жыл бұрын

Pretty much just a good wash and Cover All is all I use.

@MrGunner945 6 жыл бұрын

SC1 High Gloss coating also works great for plastics, especially for bringing back faded plastics. It also helps with cleanup, due to the dirt and mud not sticking to the SC1.

@FoxRacing238 7 жыл бұрын

Can u make a video of how you seal up your air box ?

@CalebWaddleMedia 7 жыл бұрын

FoxRacing238 there are 3 main places where you need to all the seals as in where your snorkel come in around the carburetor seal and the hose on the left side as well as the screw on the outside and then the lip of your lid put silicone on that then just stick it on lock it up.

@crafty927 6 жыл бұрын

if my bike dies underwater do I need a exhaust snorkel or idle up carb?

@dannyreid1845 5 жыл бұрын

FTW_Shadowz I have the same problem

@mitchelmathews7025 5 жыл бұрын

How did you go through mud with the electric shift solenoid because I heard if you get mud in it it will stop working

@laynewilliams2353 5 жыл бұрын

Thats true but if you seal it is fine

@jonathandaniels5230 7 жыл бұрын

Do you have to snorkel your exhaust? I had my Honda exhaust deep and it wanted to cut off. Any solutions??

@trevorcisco9220 4 жыл бұрын

You don’t have to snorkel it , but it is sometimes good to depending on the riding you do. With an exhaust snorkel it ensures you won’t get a drop of water in the engine

@gunnarwallace1427 7 жыл бұрын

Why the baffled fo-4 over the fo-14? Sweet bike

@Solitude313 7 жыл бұрын

Just trying to be a little quite. Getting old I guess haha

@kaneblakeney5675 4 жыл бұрын

Do you think I could run 29.5 tires on a 350 2wd? With no gear reduction

@srvdean3024 3 жыл бұрын

hell no

@davidp73 4 жыл бұрын

What do you use to clean the engine? That brown baked on mud is hard to clean off

@Solitude313 4 жыл бұрын

Eagle One Etching Mag and Wheel cleaner

@davidp73 4 жыл бұрын

SolitudeCustoms thanks I’ll give it try...nice videos

@darreon1k76 4 жыл бұрын

What’s the exact wheel set up here 28x9.5x12 all the way around?

@Solitude313 4 жыл бұрын

Yes, thats it, on SRA Wheels

@calebsnell4600 6 жыл бұрын

Never really known but what’s the point for the exhaust snorkel

@Solitude313 6 жыл бұрын

Just a little piece on mind, keep mud from packing up the exhuast.

@joeythompson9404 6 жыл бұрын

Do u ever sell any of your projects

@Hunter-cs1jg 7 жыл бұрын

What did you use to get the mud stain off?

@Solitude313 7 жыл бұрын

Eagle One Etching Mag Wheel Cleaner

@dylanprice6498 3 жыл бұрын

Im watching this after 4 years

@CalebWaddleMedia 7 жыл бұрын

Where did you get your exauhst snorke or did you bend it yourseld

@Solitude313 7 жыл бұрын

Caleb Waddle I just went to the local Muffler Shop and had them bend it up for me. 1.5" I'D with a 45* Bend then a 45* Flush Cut

@CalebWaddleMedia 7 жыл бұрын

Ok thank you I have been looking into a better sounding exauhst and I like your ideal a lot. Not wanting to spend 300$ on a an exauhst

@ryanursery3915 7 жыл бұрын

what size lift kit on front and rear?

@Solitude313 7 жыл бұрын

Just a 2" Highlifter

@jessejspivey1 6 жыл бұрын

Do you sell stickers online anywhere?

@brettknowles7447 3 жыл бұрын

Oh sorry I didn't realize it said it in the video

@Solitude313 3 жыл бұрын

No worries, Just a 2"

@brettknowles7447 3 жыл бұрын

@@Solitude313 ok thank you

@dabonit944 6 жыл бұрын

could u fix mine like this one

@bradyriggs528 7 жыл бұрын

How do you snorkel the electric shift????

@Solitude313 7 жыл бұрын

Whats there to snorkel?

@rzr8hunnid517 7 жыл бұрын

SolitudeCustoms is there a gear reduction

@bradyriggs528 7 жыл бұрын

SolitudeCustoms the angle sensor!

@hondaforlife1236 7 жыл бұрын

Where did u get the exhaust extension at would love to no. Thanks

@Solitude313 7 жыл бұрын

Any muffler shop can bend you one. 90* to a 45* and cut flush.

@hondaforlife1236 7 жыл бұрын

Ok thanks

@hondaforlife1236 7 жыл бұрын

How much did they charge u?

@Solitude313 7 жыл бұрын

$20

@hondaforlife1236 7 жыл бұрын

Did u get it at a shop somewhere around longview tx

@dwilson8370 5 жыл бұрын

Whats the offset on the rims you used on this setup?

@Solitude313 5 жыл бұрын

They only offer 2, IRS and SRA. These are SRA all the way around to avoid wheel spacers on the front.

@dwilson8370 5 жыл бұрын

@@Solitude313 thanks for the response! I figured that's what ya did but wanted to make sure. I got the same rig in orange and like your setup. Thanks again!

@durtysouthkustomz8862 5 жыл бұрын

@@Solitude313 what tires are you running on there like name and size and is that a tractor muffler that you used to do the exhaust

@mcdangles1232 3 жыл бұрын

0:30 sounds like a crowd cheering

@kyleprichard9872 4 жыл бұрын

Where are you located I need someone to snorkel my bike

@Solitude313 4 жыл бұрын

Im in East Texas by Longview

@lefloreoutdoorsman8953 4 жыл бұрын

Where did u get ur muffler and how much did u pay for it

@Solitude313 4 жыл бұрын

Tractor Supply Company, only about $30.

@obspowerstroke1864 3 жыл бұрын

How is it not ticking my rancher 350 ticks bad on top end

@Solitude313 3 жыл бұрын

It was a relatively new Rancher and the motor was never gone into. Also I just adjusted the Valves and tuned the Carb just right.

@buckdaddy7582 7 жыл бұрын

+SolitubeCustoms Ok Cool Thx for responding to me

@austinnewman7642 7 жыл бұрын

Does it have a gear reduction

@Solitude313 7 жыл бұрын

Nom and it actually did pretty dang well this weekend, even in the thick stuff

@abbymorales6364 6 жыл бұрын

Do you sell Solitude Customs decals?

@Solitude313 6 жыл бұрын

I need to find a good supplier and I will, I want to.

@yudasifuentes2068 6 жыл бұрын

Does it have a gear reduction in it?

@Solitude313 6 жыл бұрын

Yuda Sifuentes No, not yet.

@yudasifuentes2068 6 жыл бұрын

SolitudeCustoms i was looking one for my rancher 350 es

@daryncochran6194 5 жыл бұрын

Does the owner of this Rancher have a channel?

@jacobhumphrey5048 7 жыл бұрын

How much was the exhaust?

@Solitude313 7 жыл бұрын

Jacob Humphrey like $35 for the Muffler and $20 for the Snorkel

@johndutton7191 7 жыл бұрын

SolitudeCustoms hey man lookin at this 300 it's smoking he said that he just got new jug and piston put in but not rings or valve sell and it's still smoking would that be true or could it be anything worse? Thanks

@Solitude313 7 жыл бұрын

Got to have the head reworked with at least new valves seals usually.

@johndutton7191 7 жыл бұрын

SolitudeCustoms what would you all do to make sure it it would work

@buckdaddy7582 7 жыл бұрын

First to comment