Excellent video! Concise and to the point. Very professional & very useful. Thank you.

Thanks for this - just did this on my unit and it's working perfectly

This is awesome ! thank you from Oregon, USA :)

Great video! Have ordered my spares from you and can’t wait to get my HVAC fixed 🙌🏼

Bought the kit a few weeks back, tomorrow's job to fit it. Job done, all up and running.

Excellent video! Thank you for carrying this product! My rover screen looks perfect now and it only took me a few minutes!

worked like a charm, thanking you for the video, very much appreciated.

I just performed this repair on my 01 HSE. I would like to share a tip for cleaning the metal contacts, an eraser makes this much faster than using a plastic scraper, as long as you are careful not to overdo it! Thanks for the great vid and tips!

You are a p38 legend 🙌 👏

About to do this fix on mine. Thanks for the great vid.

Merci pour votre explication , maintenant je saurais faire 👍

Thanks. Good guide!!

Best video, I have an issue with some of the screen and definitely the knob.

You ara amazing

Super instructions

great and easy to fix ... i used a rasor blade to "clean" both sides ... faster :) ... thanks a lot

Excellent

Hi, Good video. Much appreciated the making. Question, have you replaced the lights with brighter LED's before?

Perfect job! , may I ask a question. In 6.27,you place the zebra strip in place. Is it the old one you removed before or it is a spare one. Thanks for your answers

Hey nice video ,I have zebra strips from my lcd display will they work?

Hi I have the cut harness and would like to know what wires to hook 12v positive and ground to in order to light up the screen / display

Great video. I have a quick question. Got a few of these units from a friend(with various problems), and I'm trying to figure out how to connect it to my bench PSU for testing. Tried connecting Bat+, Ignition1 and GND - nothing happens. EDIT: Nvm. After few minutes of tinkering in my workshop I found everything I needed. Totally missed that I also need to connect "ignition 2" and backlight.

Great stuff. I Will order one. I wonder if you can get a zebra connector for the screen on the stereo? Mine has the same issue as the HEVAC.

hi dear, nice video and so useful, I have another issue with my HVAC which is the buttons lights doesnt come on when I switch the car lights on! knowing that the light bulbs on the HVAC board are ok! Any help on this ?

HI, Great video. I have a spare unit and have a working screen and ribbon connector. What adhesive can be used to swap a screen from one unit to another?

Hi, where can I get one of those?

What is the website of the parts to buy

Just done this repair. Works really well, since doing it though the outside temperature is reading -40 any tips

Use a tooth brush to clean contacts with say metho

Good jop

any info on how to get my hands on the silly diagnostics for the HVAC? My HVAC "SES" light is on and it refuses to operate the bloody servos. Cheers from across the pond.

thanks for informative valued video, how can i get this zebra strap, thanks

Hi I'm from Malaysia I would like to oder the repair kit...could sir point us in the right direction sir

How can I order this kit ?

Hey guys, my screen is on the fritz, and this was recommended to me. Will this come back in stock anytime soon and if so do you offer shipping to the United States?

Would this repair be likely effective on P-38 radio head display?

Hi guys can you tell me the hard wireing set up as I can set up a hard feed. I have the plugs. Just can work out your wireing in your great video bestwishes nick

Hello, can you help how to connect the panel with the adapter ?

What does the book in the? Means my heater is on but it's not blowing anything out and the book in the? Shows up I barely used it cuz I have another car but I still turn it on but I think I need to drive it longer what should I do?

Where can I find the bulb replacement for the green screen?

Does LandRover Have a test bed or is there a way I can test of the screen turns on?

Also wondering about shipping to the US

Thanking you for the video. I have another issue with my HVAC: fan switch does not work correctly. when I turn the switch to the right or left, it reacts badly. For example, I have to turn a lot back and forth so that he at least changes some air supply. What can you recommend me to do? Do I have to disassemble hevac like you completely and clean the contacts on the switch or is it a mechanical problem with the turner?

My Hevac unit works but it has developed a white blob in the center of the screen. Not sure what is causing that, so its a bit difficult to read. Any help will be nice.

just watched this, will this also work on the p38 sat nav screen ?

I'm interested in ordering the P38 HEVAC screen repair kit ? I live in Canada

What is the size of the connector? I can get these by the boatload if I wanted. Just need to know what size to order?

How about the radio screen! Is it similar?

were can i get the kit

Do you sell replacement screens?

How does the zebra connect individual pins?

Your website link is not working, can you redirect?

can you let me have a diagram of how to connect in to test on a bench please as you have

vraiment dommage qu'il n'y ais pas la traduction ;)

We have created a Range Rover P38 group on FaceBook, WHAT another one i hear you say? Well we set out to try and do something a little different and that is to do things right.! Gone are the wannabe armchair engineers and the trolls that seem to hinder most groups and in will be an admin team that consist of guys who knwo what they are on about and can navigate their way around RAVE to come up with solutions to problems. Its a very fresh group, and its very early days, but with your help we will get there, and not only are we looking for new members, we are looking for experienced guys to join the admin team and help build the group. We can be found here.... facebook.com/groups/925014894688556/