RARE duplex 'Express Lift' machines - how it works with animations

Рет қаралды 151,283

Күн бұрын

This PART 2 of the Duplex lifts videos.
This video comes with all the usual attention to detail that you'd expect from a mrmattandmrchay video.
Thank you very much to those involved for showing us around (also see note at bottom).
TO MY VIEWERS:
I'm hoping we've done enough to be worthy of your support...please consider subscribing to the mrmattandmrchay channel - thank you!
Still to come (i.e. not uploaded yet):
DASH POT video
MH52 Express Lifts selector video (the floor selector in more detail)
PART 1 is here:
• RARE duplex lifts stil...
..........
LIFT IDIOCY WITH KIDS:
• Random lift adventure 13
Some channels treat playing around in lift shafts as something 'fun', which normalises the activity (especially with kids in the video).
The consequence:
• Teaching KIDS TO SURF ...
Also featured in THE SUN and THE MIRROR newspapers:
www.thesun.co.uk/news/1593382...
My channel does not promote or glamourise dangerous activities like lift surfing.
..........
MY BEST VIDEOS PLAYLIST:
• MY BEST VIDEOS (only t...
..........
LINKS:
EXPRESS DISPLAY PANEL EXAMINATION AND POWER-UP:
• EXPRESS LIFTS floor po...
OTIS DUPLEX LIFT LOGIC EXPLANATION AND ANIMATION:
• DUPLEX elevator call l...
PART 1 DUPLEX LIFTS VIDEO:
• RARE duplex lifts stil...
LIFTTRACKER LINKS:
BATTERED EXPRESS LIFT:
• The most battered lift...
HISTORIC OTIS LIFT:
• Amazing 1920s Waygood ...
..........
THE MRMATTANDMRCHAY CHANNEL, established 2008:
I'm passionate about uploading quality and interesting videos for YOU, my audience.
What is my channel about? "Old lift machinery made interesting", old air-raid sirens, prehistoric alarm equipment. If "I" don't find it interesting ...then IT DOESN'T GET UPLOADED!
I always spend a lot of time editing my videos with animations, video in-sync with music and voice overs to bring you QUALITY videos to watch.
My moto - "Quality NOT Quantity" - spending a month editing a video is not a rarity!
But without you, I'm nothing here. Thank you so much for watching.
...mrmattandmrchay is me (Matt) and my son Chay.
..........
Note: Please do not contact the organisation here, this visit was pre-arranged as we're an internal contractor working on a different system.

Пікірлер: 123

@don1857 8 ай бұрын

As a building electrician in a large complex, I used to watch the relay panel of our 1950's Otis controller. By watching and listening I was able to determine the purpose of the majority of them. Most of the other lifts were modernized and did not have the open racks. Great video!

@PaulFisher 8 ай бұрын

The clacking of the relays is extremely satisfying.

@RobR386 8 ай бұрын

Wait until you see one arc over, it's quite something 😁

@TimPerfetto 8 ай бұрын

Please give me your hair

@RobR386 8 ай бұрын

@@TimPerfetto takes years to grow 😊

@pantherplatform 8 ай бұрын

I was an elevator mechanic for 40 years. You explained this really well!

@cal28kim 8 ай бұрын

Since I found this channel my wife said I've become obsessed with lifts! She said it's odd on so many levels 🤦❗ Great work keep it up.

@Damien.D 8 ай бұрын

Designing and building complex electromechanical system like this is a lost art.

@YYYValentine 8 ай бұрын

These animations synced with the real sounds and real videos made me subscribed

@Aawsomeguy 4 ай бұрын

I have always appreciated the work you put into your elevator machine room videos. Thank you so much for uploading them to everyone in You Tube land.

@VicVal 8 ай бұрын

I simply love the level of details, examinations and descriptions in these videos. I often nerd things in to low level details myself, but I would never have the stamina to produce the content you do. Thank you SO MUCH, it's awesome!

@RODALCO2007 8 ай бұрын

Awesome very detailed video with the operation of this interesting lift system. The sounds of the contactors and motors are awesome. The editing of your video must have taken a massive amount of time as you mentioned. Keep up the excellent quality video's . Thanks.

@mrmattandmrchay 8 ай бұрын

Thanks very much Radalco2007 - I wouldn't edit them anyother way, it's just they take months to do and in the end I have to "stop tweaking" and just upload it!

@SedatedByLife 8 ай бұрын

Quite amazing how they figured out how to make this complex system work with just some relays, inductors and motors.

@peterjszerszen 8 ай бұрын

I live in the US and have been in hundreds of buildings and high-rises and mechanical rooms nationwide as an inspector and I have to say my favorite period of building is 1967-1973. There is just something about era, they all look and smell the same (those that are left) and it was an era of brute engineering force with focus being on function rather than form (as it should be). Those long basement corridors are always grungy from the buzz of transformers and motors and fluorescent lighting with magnetic ballasts, the whole basement would resonate at 60Hz and you could feel it. I love those buildings. So many of them were "overbuilt". Once you got into the later '70s, energy efficiency mandates really changed everything about how large buildings were designed and the building guts didn't feel so "raw" anymore.

@neosstuff 8 ай бұрын

its insane how such a simple machine is turned into such a complex logic system

@Lift.Tracker 8 ай бұрын

And this is only just scratching the surface of how complex some of these systems could get! Imagine a high rise, high speed set of 4, for example!

@notmuch_23 8 ай бұрын

Wow, no wonder automatic elevators were such a major innovation, and human operators were needed before them!

@a62dave 8 ай бұрын

I finally found a nice video with the heart of a teacher, the way it used to be before KZfaq algorithms got stupid. Thanks for the animation combined with real video. I love it.

@StrawberrySunday212 8 ай бұрын

Your attention to detail is excellent, Mr Matt. The time you take to create the videos, then the animations explaining it all is very appreciated.

@YourLocalGP 8 ай бұрын

Fantastic. It's clear to see how you are learning new editing and graphics techniques as the channel expands. But I'm glad the music hasn't changed - it's perfect.

@olthepol8103 8 ай бұрын

Absolutely fantastic video with some great in-depth explanation and supporting animations. Amazing that something so complex is still working, amazing engineering

@davida1hiwaaynet 8 ай бұрын

Beautiful relay logic cabinet. Thank you for sharing this!

@compu85 8 ай бұрын

Nice to see an old lift that looks to be well maintained.

@poprawa 8 ай бұрын

Engineering in system like this is impressive, and then i realize, that almost every wear part failure is designed to not cause major problems - this is ridiculous how clever people where in charge of projects like this.

@poprawa 8 ай бұрын

Many clever guys where spending days messing with stuff to cause problems in testing phase, that's for sure

@suchcone 8 ай бұрын

That's some fabulous explaining, you take something that looks complex and indeed is, and make it very simple and understandable. Pure quality every time.

@hythesailor 8 ай бұрын

Jeez, it stops pretty abruptly, doesn't it?! Thank goodness for more modern lifts. Interesting that it has been preserved in what seems to be good condition though.

@AintBigAintClever 8 ай бұрын

The attention to detail in the edits alone just got a thumbs up. Moving annotations to match a live shot, such as at 2:38 is something which takes a lot of tweaking, sometimes frame-by-frame.

@PaulFisher 8 ай бұрын

The relay logic on these old systems is incredible. I can hardly imagine what it must have looked like in a true high-rise, with more floors than you could count on your fingers and toes. Thanks for the in depth tour of the guts of an old elevator!

@Lift.Tracker 8 ай бұрын

Absolutely! The best example for an ‘Express Lifts’ version would be the DMR system shown here. And even this would’ve probably been quite minimalist compared to some! kzfaq.info/get/bejne/nuBngdmYv8fTdIE.htmlsi=E10J5SJ7-Kzy1xPp

@nos9784 8 ай бұрын

Wait til you see a railroad shunting yard's interlock😅

@mushroomcraft 8 ай бұрын

I love a classic express. Definitely my favorite. SUPER rare to find any lift with original logic these days, I'm glad to see the logic of this lift in detail. Thank you for this video!

@ChoxyTV 8 ай бұрын

You got my sub for this video. This is super interesting to watch and see how it all goes together. Keep up the amazing work love this so much.

@38911bytefree 8 ай бұрын

Great Vid Matt, a WORK OF ART.

@ZZ9ProductionsOFFICIAL 8 ай бұрын

another fascinating video, these are always excellent for deepening the appreciation for the time and effort that went in to designing these old systems and figuring out how to make them work with just relays like this

@TheLiftDragon 8 ай бұрын

You did an absolutely great job in providing this in-depth look into these Express lifts! Great work! I have never seen this approach to serving landing calls, that's very interesting. I'm only familiar to the way Schindler's relay controllers do group dispatching. Their solution is to use a separate central unit that does the dispatching, while the controllers of the single lifts only hold car calls. The same applies for Aconic.

@mctechswitch 8 ай бұрын

GREAT JOB! You put so much effort into your videos and i appreciate that. :)

@_DML_ 8 ай бұрын

Excellent detail in the video as always. It's amazing how many moving parts are in the electro-mechanical control systems. It goes to show why it's so important to keep unauthorised personnel out of the shaft and control rooms.

@guineagirl5078 8 ай бұрын

Amazing as usual. Extremely interesting and informative ❤

@markifi 8 ай бұрын

RARE example of when the editing actually makes the source footage better as opposed to just cutting it up into a million small pieces for dramatic effect leaving you with something much worse then what you started with (99% of the stuff edited by most other people)

@sportblatz6129 8 ай бұрын

near god tier editing in this👍

@wideyxyz2271 8 ай бұрын

Fascinating stuff. many thanks for sharing this.

@yellowcrescent 8 ай бұрын

Very cool to see. There's so much that can be done with Relay Logic and special types of relays (Timers, Delays, etc.). I worked as a Controls Tech for a while (with PLCs & industrial automation), and noticed that old Relay Logic diagrams were basically what modern Ladder Logic is emulating (seems obvious, but the UI in Allen-Bradley and MELSEC software even looks like a schematic). I imagine back in the day they would draw out a function/control diagram and state machines, then translate that into Relay Logic diagrams as part of the schematic creation.

@iO-Sci 8 ай бұрын

Wow ! this machine looks unique and kind of serene. 우와 ! 독특하고 차분한 느낌이에요

@NicholasAndre1 8 ай бұрын

Wow thank you for this. I love these sorts of control systems.

@Josh.Davidson 8 ай бұрын

Amazing video, Express DMR is fascinating.

@pcuser80 8 ай бұрын

Perfect video, what a nice edit. All those details. learned a lot thank you.

@keith800 8 ай бұрын

Great video , and admiration for the amount of work you put into these video's👍.

@rose-ey6ct 8 ай бұрын

Serviced Express lifts circa 55 years ago. Brings back memories. One Express lift had a Bull Slipring motor but was not a super tandem. It was, however, 2 speed. Lift accelerated up to speed just like any other slipring motor. To slow down, resistance banks wer re-engaged, and an eddy current brake brought the speed down to a slow crawl to a stop. This lift was circa 50 metres a minute at high speed. It had full loadsense weighing to detemine the acceleration and braking required.

@666Anonymous0 8 ай бұрын

Very informative on how the position indicator works, i have a 90s ile display ive been playing around with but wasnt fully sure how it works

@brunoais 8 ай бұрын

Another amazing&awesome work from you. Thank you very very much!

@mrmattandmrchay 8 ай бұрын

And thank you also Brunoais for the compliment :)

@VOLTRONDEFENDER4440 8 ай бұрын

Woah nice video! Keep up the good work!

@stabilini 8 ай бұрын

Amazing complex machine !!

@Private-GtngxNMBKvYzXyPq 8 ай бұрын

Thank you for sharing.

@ArthursLiftAdventures 8 ай бұрын

Very fascinating video thanks for showing!

@KutWrite 8 ай бұрын

Well done, sir(s)! Maybe it dependson country, but here red indicates "down" and green indicates "up."

@juandasilva9226 7 ай бұрын

Amazing yours videos! Fenomenal Quality. Amazing controls and how before computer and microprocesors this lifts working together.

@mrmattandmrchay 7 ай бұрын

Thank you very much for the compliment!

@ronwade5646 8 ай бұрын

You should see the one at Sun Valley from 1936! Big Selenium rectifiers and Relays a plenty, truly unobtainable parts now.

@davidperry4013 5 ай бұрын

Vane readers are also used in modern PLC controlled elevators.

@Plaxton_presidents 8 ай бұрын

Awesome video

@tony359 8 ай бұрын

making some videos myself I can only imagine the time invested in making this video! Amazing!

@mrmattandmrchay 8 ай бұрын

Thanks for the compliment Tony! Sometimes I think they're never going to be finished, but I would never do it anyother way. As I've said a few times, if "I" don't find my video interesting then I don't upload it.

@craigthepony6259 8 ай бұрын

i just find it fascinating how a human was able to get something super complex to work all mechanically

@Petertronic 8 ай бұрын

Amazing detail and explanation, I love the sight and sounds of the relays, contactors and motors all working together like a well conducted orchestra! Are these lifts remaining in operation, or scheduled for modernisation?

@mrmattandmrchay 8 ай бұрын

Thanks Petertronic. As far as I know, no plans for them to be modernised yet.

@VintageLiftLad 8 ай бұрын

Beautiful set, I actually know where these are as it happens, shame they're pretty far from me to visit, although I'll definitely make a detour if I'm ever in the area! Long may these live

@christopher-2000 8 ай бұрын

awesome lift video

@hariranormal5584 8 ай бұрын

very cool! but i hope your future video also includes a bit more on how the logic works. You see, to me, just a bunch of relays being able to "work out, act like a logic, a brain" just doesn't feed enough to my mind at least. I always wanted more detailed explanations on *how* a function works. I have made Lift logics in minecraft even using gates (my designs were different than others, i was using modded so i had more logic control), but i just can't understand how bunch of relays can imitate this haha. Regardless amazing video with detail, like I said before too, they leave more than just information. Something nice, eerie, a lot to ponder about old equipment that probably is going to see its last years soon. Remember the DMR lift video? Oh hell I'd love a explanation on how they work....

@TonyVRailfanning 8 ай бұрын

A great job once again, AC one or two speed elevators are not nearly as common here in Canada it seems. most elevators (lifts) here are DC generator to DC motor or of course now just AC logic

@joseph1407 2 ай бұрын

Complimenti per la realizzazione dei video, grande passione e realismo, ho lavorato per tanti anni su questo tipo di ascensori. I tuoi video sono fatti veramente bene. Sono molto legato al funzionamento elettromeccanico, ho fatto molta esperienza e il fascino di queste macchine è intramontabile e tu riesci a comunicarlo molto bene. Se puoi fare un video sugli ascensori OTIS con selettore e moto generazione in locale macchine. C'è molto da imparare. Grazie ancora complimenti

@crocoland6330 8 ай бұрын

Awesome old fascinating and rate lift!!’

@TimPerfetto 8 ай бұрын

Thank you

@toddhunter3137 8 ай бұрын

The lifts here in my tower block are express lifts, they're old and really need to be replaced lol.. it's interesting watching your video to see how it all works. Also the lift cars don't always match the floor that well it can be a few inches out at times. Lift B when it arrives at the ground floor it can be a bit of a clunk stop. I've lived here for years so I'm used to it however when I have guests they're a little bit unnerved by it.

@nul1fe 8 ай бұрын

Who would of thought lifts would be interesting.

@BeckettsElevatorAdventures 7 ай бұрын

Another quality video. You inspire me to make better videos.

@dna9179 8 ай бұрын

its mind blowing

@pizzablender 8 ай бұрын

What an elegant controller.

@mauromazzoncini5711 8 ай бұрын

Our engineers of the past were simply incredible

@BlackWolf42- 8 ай бұрын

I was wondering if there was an intermittent or damaged inductor and it caused the floor selector to jump a 'notch or two'. What would happen in this case?

@mrmattandmrchay 8 ай бұрын

In short, when the floor selector reaches it's 'terminal floor', if the correct floor switch is not pushed then the selector is assumed to be 'out of step'. The selector advances around rapidly until the selector pushes the correct floor, thus resetting it's position. I do have a video of this, and it's one of my videos to be edited and explained.

@federalsystem7000. 8 ай бұрын

@@mrmattandmrchayI'm subscribed to you §übßçrïbë

@markandsuriyonphanasonkath8768 8 ай бұрын

DAMN FINE! Thank you 🙂

@Tuberuser187 8 ай бұрын

Just to think a single microchip can replace this entire electromechanical system, this is incredibly fascinating though and the video does a good job explaining it.

@mrmattandmrchay 8 ай бұрын

Yep, lift machinery is mainly circuit boards and software these days, not as fun as watching these in action.

@liamemmaairraidsiren9046 8 ай бұрын

@mrmattandmrchay how are matt I'm trying to recruit a secomak cs8 siren.

@jamesspash5561 8 ай бұрын

Electromechanical logics are amazing. Learning them and understanding is very interesting. What is lost with so called technicians of today, is, they assume/rely on a plc to do the work. Lost is the ability for basic electrical trouble shooting. I work with some old EM machinery. Our new techs are clueless. They cannot understand how to trouble shoot with no place to interface a PC. They are clueless with basic electrical trouble shooting and simple ohms law. Sad.............

@godlugner5327 8 ай бұрын

15:20 (on the left side) nobody is safe from mislabeling.... Not even if there's only two 😂😂😂

@user-qz8ix3mc4u 8 ай бұрын

Q. in some lift motor rooms I've been in, there has been a tool for manually takng the brake off. If you do this with an un-powered empty lift, will it move. Q2. I've seen a video of a lift accident where the car has gone upwards uncontrollably. Should the emergency brake operate in these circumstances. Keep up the interesting videos.

@CentiZen 8 ай бұрын

I have always wondered from the name of the channel, is it a team of two who writes and produces these videos? Or is it just the work of the man we hear narrating? Either way the level of effort is impressive.

@zuluoscarlima7822 8 ай бұрын

Greetings from Russia! Our elevators rarely operate for more than a service life of 25 years. At most, the experts extended it for a year or two so that the owner could find a replacement and order the equipment from the manufacturer. How is this organized in your regulations? Working elevators from the 60s, amazing

@AtulSohan 7 ай бұрын

What's that thing in the end? A bellows like pump ? What is it ? What does it do ?

@Skalekul 8 ай бұрын

My guess at what the device is at 16:45, I think it's some sort of interlock device for the gate/door? Has some link to that cable that it is pulling?

@Capturing-Memories 8 ай бұрын

The CANBUS protocols and modern SoC (System on the Chip) simplified all these mechanical devices, The entire physical wiring schematic is mimicked by firmware programmed into an FPGA chip that controls all the functions of the system using few wires and digital codes and messages instead of an analog voltage on each dedicated wire for one function only.

@lesmoor001 8 ай бұрын

looks lethal .is that a Bristol accent ?

@piggyfan29 8 ай бұрын

Hilton park part 5?

@Phoen1x883 8 ай бұрын

Matt, the link to part one doesn't seem to be in the description.

@mrmattandmrchay 8 ай бұрын

Thank you very much for your observation... I've added it now :)

@toddhunter3137 8 ай бұрын

Re parked lifts. Here is 16 floors, when there's no calls lift A resets to floor 8 and lift B resets to ground floor.

@georgieippolito9924 5 ай бұрын

Can a otis elevator relays work with household voltage? I found them on Ebay and love your videos! I would love to build a pet elevator using a otis floor selector If I can find one while using the relays. I would have the relays in a glass box that lights up normally using a relay to Activate the light and shut off when the sequence is done. the plexiglas box with the floor selector I'd have it light up with color changing LEDs from the inside. is this possible?

@mrmattandmrchay 5 ай бұрын

Depends on your household voltage. Here in the UK it's 240volts AC. The Otis relays are likely to be around 110VAC - so the answer would be no, not without a transformer (110V construction site transformer may be ok - search ''110v construction transformer'' on net, the yellow things). However, this is a massive over-kill. If you did build a pet lift then there are plenty of other relays that'd work, and then you could probably use a 12v relay coil (use a 12v power source) and you'd not need to generate 110V. You could also safely connect LEDs to the relays when they switch on.

@Albrecht8000 8 ай бұрын

16:31 Was this spark normal? Greeting from germany

@Nderak 8 ай бұрын

wow

@poprawa 8 ай бұрын

15:01 Are those timers transistor based?

@mrmattandmrchay 8 ай бұрын

No they're not. They're actually quite simple - behind is a big capactor and loads of resistors on the dials. The capacitor charges up, then dumps it's current through the relay next to it. The resistors control the discharge rate. You can see them better here: kzfaq.info/get/bejne/hsCWac-SrsjJd30.htmlsi=WGkd2UGDSszyzKXI&t=441 7:26 you can see the back.

@shanewarnes7339 8 ай бұрын

Hi, how can I contact you on a personal note please. I have a full working large telephone exchange with many relays and uni-selectors. Cheers Shane

@davidgrisez 8 ай бұрын

This is definitely an old electromechanical relay control system for this pair of elevators. Modern elevators use a microprocessor based control system. One big problem with an old electromechanical relay system like this is that these old electromechanical relays are not made any more. At some point in the future this pair of elevators will need to be converted to a new elevator control system that is microprocessor based.

@user2C47 8 ай бұрын

Fortunately, when they did make them, they made a lot of them, I'm sure there's NOS to be found, even if the box says Western Electric. Edit: This panel probably runs on 415 volts. Relays with 48 volt coils wouldn't work.

@dopiaza2006 8 ай бұрын

Bradford University?

@user-un3xg9mi7y 8 ай бұрын

Why are you using a modern lift as all your intro?

@mrmattandmrchay 8 ай бұрын

Bit of a story to that - about 4/5 years ago I was looking for a new intro, filmed that sequence and the ceiling with the flood lights illuminated it perfectly. Not filmed anything better since that works as well as this one does.

@jensschroder8214 8 ай бұрын

a computer built with relays!

@OLIBAHN475 8 ай бұрын

ich mag gerne schaltwerkschaltung

@a.p.2356 8 ай бұрын

Not sure how I ended up watching a detailed video on the electromechanical logic system of an old British elevator, but I can't say I'm not enjoying it...