If you guys haven’t seen our latest videos, you might want to check them out! She’s now pushing over 500hp. We actually just revealed our new wheel sponsor! Check this out kzfaq.info/get/bejne/nrVlm7Ni2dTdpac.html

Right to the point and no b/s, don't even have an ecoboost but still ended up watching the entire vid.

Some people that are leaving bad comments....FYI.....yes he spent 300 bucks for sound...but that sound!!! Will extend the life of the turbos....and engine

Own a eco boost and I gotta say i been working on it since I got it 2019 and your videos along side with the America truck videos are the most to the point and no bs videos keep it up man your good at it

That looked like a pretty easy install. I was really surprised with the sound it had, good job man!

The sounds in the last clip 😍

THAT SOUNDS AMAZING

I’m happy with the fact you kept it straight forward and showed the results after. Quality content!

I found this guy by accident and I love the style of this video. Great info and right to the point, no stupid ass music and somehow it’s actually engaging. Great video.

Great video guys. Its louder than I thought it would be.

Awesome as always!

My hat goes off to you when your doing DIY's. Lol I don't have the patience in me to do so. I thought about doing a DIY on a BMW I was working on yesterday but then I said to myself I just want to bang this job out so I can eat dinner already 😂

Don't have one but watched to see what I'd be looking forward to when I get my bronco with the 2.7👍

As a owner of a 2017 f150 3.5 ecoboost i will be following your video to install. What a great sound and good video

When I was looking for a pickup I was dead set on a V8. Then I test drove the 3.5 ecoboost and got goosebumps test driving it. They're impressive. There is no 'eco' tho.

Thanks Keep the good videos coming

Great step by step video bro!!!

I'd like to do that to my 2012 F350 6.4 tuned and bulletproofed love this truck. I bought it as my forever truck. Hope it will be. It's not all about sound. But hay.

Just bought a 2018 eco boost will have to get myself Blow off Valve!

subbed because of this.. probably wont ever do it but I liked yall! XD

Sounds amazing!

Excellent! Thanks for posting! Keep up the good work.

Just found your channel from the MkV carbon cleaning video and you’ve got some good content going! Got a UG MkV GTI myself

Boomba racing has a $60 part that connects to the BOV bypass valve and still uses recirculated tubes

I drive a 4Runner and watched the entire video. Nice install

This could explain a lot, haha. I’m a carpenter and only know basic car and truck shit. I’ve been test driving 150s all week with the turbo motors and all of em sounded the same except one. I’m like dam I can hear this turbo hissing like crazy it was a night and day difference. Good video.

Great video bro

2011 3.5 182000 Miles no mayor problems just regular service, oil catch can a corsa DB exhaust that sounds great even the turbos got louder

Nice!

dude that's so sick i totally forgot about blow out valves!!

You about shit fuckin bricks when that panic went off 😂😂😂

You can also remove the turbo silencers. Remove the y pipe of the intake plumbing, then you can remove the silencers that are installed in the pipe. For those of you who might read this and try, the silencers look like a fan blade made of plastic and are seated in the pipe at the splices. There is two. Remove both and reinstall y pipe. Cheers

That's a dope truck man!!

Great video I just stumbled across it my BOV bracket didn't align properly with intercooler. I made it work, but it was like the first generation BOV Kits for the 2015 F 150.

Great video. Thanks for sharing. New subscriber here.

Very well done. You make it look easy! I would have liked to hear it from the outside.

Excelente 👍 Ford #1

Good video

Love my 3.5🤤🤪

Awesome video. No extra bs. I like it. Sounds kinda made me consider an eb!

I thought I was the only one that worked in the fire on my truck be safe out there brother

Sweet vid man.

I drive a horse to work and I still watched the whole video

Can you give me any info on how to get this for a 2012 f150. Thanks

Will work on the Taurus twin turbo interceptor

Was this supersonic done before the vee port electronic one turbo smart came out with?

That’s crazy you had to do all that work to get to the valve I have the 2015 eco mustang and my valve was pretty much right on top

What about a 2016 f150 lariat? I want to have a little more noise

The simple VTA mod sounds just as good if not louder. Hard to tell from video how loud it actually is but I just vented the bypass and it’s loud as fuck.

Sad to see so many haters, great video, part just arrived at my house gonna put it on when i get home

It sounds good but I really want to know if it helps increase HP, torque, or just helps the motor/turbo breath a little better. That is the ONLY thing this video is missing. Great job.

I have 2014 eco 3.5 and all this time i thought something was wrong with my truck!! It's suppose to make that sound??? NO WAY

Go get a chair leg tip for $3 and spent 20 seconds installing it and take it out whenever you want. Same exact sound

❤️

Can you provide a link of the product, I would greatly appreciate it.

Quick question. Does your truck have navigation with the sync 3? I have a 17 stx with sync 3 and when I pull up my nav on android it doesnt look like that.

Can't beat them F150 Ecoboosts!

So what where rhe parts xalled that u installed , kinda new to this and love the sound looking to install on my trucj

Hey guys huge fan, got another question will it make a difference if I don’t have the stock intercooler. I have the Mishimoto Performance Intercooler. So will that make a difference?

Hey got the link what product you buyed blow off valve ? Gladly appreciate it

Doing this NOW!

Title was a little misleading. It claimed louder turbo noises which can really only be acheived with aftermarket downpipes, exhaust, and intake. This just made the "blow off" louder. Definately healthier for the truck but if your interested just in the noise there are much easier ways of doing it that dont cost almost $400 dollars. Just research "vta mod". But all in all excellent video and i like how you demonstrated that it can be done in your home garage with basic tools. Keep up the good work!

Sounds just like my factory VTA mod....

Great video What exhaust installed? 2.7 or 3.5 Ecoboost?

I have a 2017 lariat. Can you make a video? Or is it the same for install?

Can this be done to a 2013 eco boost

Nice , I like the lift also , what size is it ??

Neat video. That clip installed at 7:25 doesnt look right though. You a fireman? me too. they let you have facial hair over there? lol

Dang sounds legit! Been thinking about pulling the trigger on this one. Would you guys happen to know a way to get custom tunes online? I just ordered a programmer for mine, and live in California 🤦‍♂️

Could I get the info on all parts involved with doing this? Thanks.

Or you can just pull the hose off and then cap it and have the same thing without spending 300$ and ruining a sensor. Also not having to pull the bov off and clean it every once in a while is nice.

What are those wheels on the truck in the thumbnail?

Lmao the truck has a burglar alarm

Hello, what is that for? Where can I buy it and what is its name?

Those wires that you clipped on to cancel the engine light do they come with the system or bought separately

What size wheel spacers are on that

He keeps mentioning that the TurboSmart BOV will give you a cooler sound. There’s more to it than than. For one, it’s great at relieving turbo pressures built up but don’t get used when the throttle body butterfly closes, and the pressure has nowhere to go except back to the turbine impellers. Potentially making them spin in the opposite direction. The other is that it relieves unwanted byproducts from being introduced into the intake manifold. Hence the oil/ water/ fuel covered MAP sensors, or the oil/ water/ fuel covered TB butterfly valve, or the nasty crap in the bottom of your intercooler. These two other features of the BOV are far more important than the noise it makes.

Sounds great. Where can I buy the kit you used in the video?

What did you put in like the actual name of it that sounds good I wanna get one so please what did you order exactly thanks man appreciate it

Does this apply to the 2.7 as well?

Did you trim that top hose to fit tighter or clean it up, seemed to long?

That's it, this is what firefighters do in there down time. I'm going to become a firefighter...lol...jk, thank you for service and great video.

@Ratchet Wrenches Do you only hear the turbo more when you let off the gas or you hear it more also when accelerating ? (kind of like a big diesel pickup truck)

Did this truck have any recalls in regards to windshield breaks?

Sounds awesome. Does it fit the 2.7 ecoboost?

Awesome video man!! I want to do this to mine. Will it void my warranty?

Could I use that on my 2014 fx4

it's not good to do this because the first hose you took off allows heat to be transferred easily through the intake fan coursing through the back end of the tail pipe. That being said, I haven't got a clue what i'm talking about, but thanks for reading :)

I have a 2019 ecoboost also and I wanted to do the same but I was wondering if this removes your warranty

Did you adjust the spring any? Mine is loud when driving but parked revs you cant hear it.

Do you guys know if this blow off valve will work with AMS’s intercooler?

Cut wiring is why I buy new vs used vehicle's

I may have missed it, but where did ya get it? No Link?

Will the check engine light come on if I install this

What wheel set up is that ??

U should tune it add a boost controler and a tune my expedition ran high 11s on the 1/4 mile

I did the same set up on my 2016 F150 with the same BOV but didn't have to take the intercooler off, why did you?

What kind of exhaust on truck?

Did you use the factory exhaust and if so is it still quite? I like quiet performance.

He was tryna play it off when the retainer clip didnt go through right lol