New Spektrum NX6 Flight Transmitter Review: Worth upgrading?

Рет қаралды 75,508

Күн бұрын

In this video, I go over the new features of the Spektrum NX6 Flight Transmitter, share what the updated features are compared with the DX6, show you how to transfer over all your models, program a new plane from their model pre-sets and share my early thoughts about whether it's worth upgrading.
Some of the updates include Wifi connectivity, smart ready (for telemetry readings from your smart batteries, receivers and ESCs), color screen with customizability, diversity and folding antenna, model presets and templates, no separate dongle needed to use it with the RealFlight simulator, re-chargeable lithium ion battery, and the SAFE flight modes no longer take up a channel. Kind of cool!
Also, I misspoke about the required SD card - it's 16GB, class 6 or lower (not 62GB); also it's a micro USB charger (not USB-C!).
1:26 IN THE BOX
2:50 EXTERNAL FEATURES
5:59 TRANSFERRING YOUR MODELS
8:34 USING THE BNF PRE-SETS
10:11 CHANGING COLOR PALLETTES
11:27 WIFI SETUP, UPDATING FIRMWARE, REGISTRATION
12:23 ACCESSORIES
13:02 RECAP: IS IT WORTH UPGRADING?
IN THIS VIDEO
Spektrum NX6 6-Channel System (with AR6610T Receiver) SPM6775: bit.ly/3w20igt
Spektrum NX6 6-Channel System (Transmitter only) SPMR6775: bit.ly/3J4qbzU
Nerd Lanyard (a.k.a. neck strap!): amzn.to/3kLqDWX
Carry case (not the same one from my vid but similar): amzn.to/35H5PLY
*******************************************
EXCITED TO LAUNCH MY PATREON!
Become a Patron: / rcgirl
CONNECT WITH ME
On Instagram: @RC_girl / rc_girl
On Facebook: / thercgirl
Vinyl RC GIRL decals: www.etsy.com/s...
RC Girl Tees: teespring.com/stores/rc-girl-merch
MY KZfaq FILMING GEAR: amzn.to/2yJE2wd
KZfaq BACKGROUND MUSIC: Epidemic sound - www.epidemicso...
*******************************************
#SpektrumNX6 #SpektrumTransmitter #NX6

Пікірлер: 221

@RCGirl 3 жыл бұрын

Quick correction - I misspoke about the required SD card - it's 16GB, class 6 or lower (not 62GB); also it's a micro USB charger (not USB-C!).

@mtnmyke 3 жыл бұрын

Thanks for clarifying!

@henrockmarte187 3 жыл бұрын

Thank you for the correction love!

@Sayder.k62 3 жыл бұрын

You can tight the srall weehl!!!

@justray510 2 жыл бұрын

the part that connects to the computer is a regular size USB connector or so it shows in this video. The other end is micro.

@PetrincicBrosRC 3 жыл бұрын

Great video. Thanks for posting. Big salute from Slovenia, Pilot Robert

@Jbels 3 жыл бұрын

I got my NX6 a week ago, I love the range with the diversity antennas and the telemetry. Great review!

@RCGirl 3 жыл бұрын

Nice! Good to hear. 🤘🏼

@henrockmarte187 3 жыл бұрын

I so enjoy hearing you explain just about everything you expose and how beautifully and uniquely expressive you are too 😍

@boodaghost6896 Жыл бұрын

The last Spektrum TX I've bought is the DX7 from way back in 2008. This thing scares me a little. I'm in my mid 50s and hate trying to learn new stuff. Love the hobby. Appreciate your vids,

@johnrobinson1140 Жыл бұрын

I bought the NX 8 and I'm not gonna lie, I was a bit intimidated. It took me a little time and was a bit frustrating but there are some good tutorials on line. All in all though once you learn it they are awesome radios.

@BillKisel 3 жыл бұрын

Well done RC Girl! In my opinion the best NX6 review to date.

@WiliiamNoTell 3 жыл бұрын

First comprehensive review of the nx6 thank you very much

@SpektrumRCvideos 3 жыл бұрын

Great video! Thanks for flying Spektrum!

@RCGirl 3 жыл бұрын

Thanks! ✌🏼

@keithcarter9396 3 жыл бұрын

Thanks for a good review, very clear and to the point.

@bazza224 3 жыл бұрын

RC GIRL you amaze me every time great great SMILE and great in-depth video 😍

@RCGirl 3 жыл бұрын

Aw thanks!

@DronemanJoeRc 3 жыл бұрын

Nice Im so glad you did this video and explained it all. I love the fact that you can use that part with the presets for the BNF and it imports the setting from horizon. that is a great tool they came up with!! I didnt know that bc I hate setting up the transmitter and that is awesome they did that!!! Also using this with REAL FLIGHT OMG IM HAVING A DREAM THANK YOU THANK YOU MY FRIEND..I just put the NX10 on preorder myself.

@tbirdslot69 3 жыл бұрын

After a 10 year hiatus, I'm getting back into flying. After watching this video, I bought the NX6. My old gen1 dx6 seems to be a little outdated now. Thanks RCgirl

@tbirdslot69 3 жыл бұрын

Got the nx6 and immediately had an issue. Would not update via wifi. Apparently a lot of people have had this issue. Sd card was the only route to fix it to current update.

@qw9bp 3 жыл бұрын

@@tbirdslot69 Did it work after the update? I can't connect via wifi at all

@tbirdslot69 3 жыл бұрын

@@qw9bp yes, after doing the sd card update it works on wifi now

@backyardscaler Жыл бұрын

Thank you! Nails exactly what I needed to see the exact differences!

@ingemarb Жыл бұрын

Thanks for your videos, helps alot. And a hello from Sweden!

@JimSturdivantWoodButcher 2 жыл бұрын

Well done, you helped me make an informed decision on the proper transmitter.

@wrestlemaniac202 3 жыл бұрын

Spektrum has come a long way within the last 16 years or so with their radios, first 2.4ghz radio i had was the dx5e the dx6i, and now i use the dx6e and now i have to buy the nx6

@roymoon1 3 жыл бұрын

Way over priced and they are funneling you deeper into their eco system. The new multi brand radios are the way to go. And they are half the price for 16 ch.

@ObsidianJayMusic 3 жыл бұрын

just buy the nx 8 or dx8

@ItAintMeBabe99 6 ай бұрын

Very excellent video. Thanks for making it.

@gsologsolo187 11 ай бұрын

Thanks for the info. Just ordered one today.

@b.g.m.6821 3 жыл бұрын

Very good video. Nice to see how you did the model transfer from your DX6 to the new NX6. One thing I would mention is that you should always turn your transmitter off before putting in an SD card and then turn it off before taking it out (as per a Spektrum tech rep). Keep up the good work!

@ytdhable 3 жыл бұрын

Incredibly helpful. Thank you!

@old-rcplane-phart 3 жыл бұрын

Ideally, personally I'm still a do or die futaba. BUT, I ain't gonna spend +$1000.00 on the 14 channel futaba system if I can get anything similar with comparable features for $200!😁👍 (& I honestly like MY DX6e!)

@urodinofpv3313 3 жыл бұрын

Great review! NX 10 probably a better fit for me. Wish HH used a USB-C rather than a micro USB

@carlhendrickson9084 2 жыл бұрын

Very Good review. I am getting a NX-8 to pair with my DX-8.

@MrHughes500 2 жыл бұрын

Thinking of moving to spectrum. Thanks for video. Setup looks OK to do.

@radrich227 3 жыл бұрын

Just an FYI, if you buy one of these used on Amazon, it may be registered to the previous owner. If that's the case, it might still be logged into the Spektrum site, or not. I don't know as I logged the previous owner out, used my own credentials to log into the Spektrum site and immediate got a message stating it's registered to someone else. Now I can't download the firmware updates that fixes the battery issue with the NX6.

@tomanderson9979 3 жыл бұрын

Thanks very much for your help.

@mmmasterscross7915 3 жыл бұрын

Thanks for making this video review! Very interesting and informative video!

@flyingfoam690 3 жыл бұрын

Correct me if I am wrong, but the Allen key is used to tension up or loosen the gimble tensions from the front of the Transmitter, without having to back off like you used to do with the older radios.

@NoAgendaFPV 3 жыл бұрын

The allen wrench is also for adjusting the spring tension and the "notching" feel in the gimbals. Pages 47-48 in the manual.

@RCGirl 3 жыл бұрын

Ah! Thanks for sharing

@old-rcplane-phart 3 жыл бұрын

Y would anyone want or need the ratcheting? (Old rc 3d heli pilot here)👍

@NoAgendaFPV 3 жыл бұрын

@@old-rcplane-phart a little bit of a step feeling in the throttle is good for having a tactile feedback when throttling up and down. It also can help to avoid throttle changes while making yaw inputs from my experience.

@billgregory884 2 жыл бұрын

Great video, I have got a DX6i that I have had for years, thinking of upgrading for new technology. will worth the watch, thanks

@scottfirman 2 ай бұрын

I know this is 3 years old now, but....My DX6 is on its last leg, so I need to think about upgrading soon. I had my DX6 repaired 2 years ago because the RF module stopped working. I have noticed this spring, my DX6 is having issues binding to now planes and the screen is flickering when it starts up. I do not think it is worth sending back in for repair again at this point. Your review is helpful, thank you.

@jeffbearden2059 3 жыл бұрын

I kind of feel like Darren McGavin on a Christmas story when he won the leg lamp....L0L

@kevinj5293 3 жыл бұрын

Nice haley I have been looking at the nx range awesome that you can do the updates with the radio I also have the dx6 👍💗

@pendulum_rc 2 ай бұрын

Would love to know how the micro USB cable and slot hold up over time. I'm interested in upgrading from a DX6, but concerned about that. Also, Is it harder to extract the micro SD card with no spring assist?

@g1lee975 3 жыл бұрын

very informative! thanks for the nice clean video.

@phillipwhite8767 3 жыл бұрын

Great review thank you for the great information that you share..

@muttbone01 3 жыл бұрын

My go-to TX is a Jumpter T-16, an it's a great radio, however... I find myself flying a lot of Horizon Hobby BNF planes lately, an I wouldn't bother with a Spektrum radio until now. The feature of having ALL of current BNFs from HH is what sold me...because I can be lazy. I STILL haven't figured out how to do a motor reverse on my Night Timber X with the Jumper. It SOUNDS simple, but of course, we all know it's not as it seems. Also the WiFi isn't exactly a must-have for me, but would make things quicker.

@nastynick886 3 жыл бұрын

What I’d really like is a Spektrum Stick Radio for Surface vehicles such as Cars and Cars. I grew up using stick transmitters I raced 1:10 scale in 92/94 with old acoms and futaba attack with big aerial that could poke somebodys eye out, and a Box full of Crystals. Nobody makes them I hate using the Wheels Transmitters but that’s there is for Cars .

@ObsidianJayMusic 3 жыл бұрын

get a team together patent it and start running with it. you dont even need to build it just sell your patent to an rc company

@EZ4U2Say11 2 жыл бұрын

You can use it on the ground all aircraft start out on the ground taxi/liftoff

@marblox9300 Жыл бұрын

If the WHEEL was orientated like a real car then it would be better. I like the sticks better to steer too.

@Wings_of_foam 12 күн бұрын

I just bought a dx6e for $87. Better than my dxs.

@FlankerTanker 3 жыл бұрын

good video but I think I will stick to my trusty DX9.

@PhilBender612 2 жыл бұрын

Hey, not sure if you figured this out yet but the gimbal protectors you have would fit if you adjust the gimbal sticks. They are adjustable so you can make them longer or shorter.🙂

@bgorbeene58 3 жыл бұрын

Thanks RC Girl you are so pleasant to watch...

@serluc774 3 жыл бұрын

Thanks for the nice review! But I' ve missed if training connection among DX6 and NX6 could be possible? By cable of what? I mean connection among instructor and fellow..

@chrissherwin89 2 жыл бұрын

Amazing video answers a lot of my questions. One other question I have. Do you have to bind everytime you change models. Or do you just select and go

@RCGirl 2 жыл бұрын

Just select and go!

@1asdfasdfasdf 3 жыл бұрын

Only the NX10 has the Hall Effect gimbals :-). So far I'm experiencing one big issue (NX6). Set the wing type as follows "Wing: 2 Ail 1 Flap". Now go to the RX Ports assignments and see if you can move the left & right Ailerons to a different ports. Never been an issue on my DX6. In fact, if you have flaps on it disappears from the options list if you try and move it too.

@TomwithaDream 9 ай бұрын

Did you just say "RC ya later" ?? haha Clever...

@mr.d7776 3 жыл бұрын

Good job. Enjoy your videos. Thanks!

@jenniferliupl Жыл бұрын

Greetings from Singapore

@nlainas7884 Жыл бұрын

I have the DX7S. And I’m about to do the purchase on NX6 my question was do I need receiver thing that comes with it

@kerrybarovick1277 3 жыл бұрын

Helped alot👍

@kerrybarovick1277 3 жыл бұрын

Picked one up last night. My dx6 was way overworked. Had to retire that 1. Nx6 is really nice. Awesome functions on it👍

@slam854 3 жыл бұрын

You are a fresh new face for RC or maybe my head has been stuck in the sand...kind'a like sand. Your Night Radian was helpful, please do the Conscendo Evolution setup and flight. Thank you.

@RCGirl 3 жыл бұрын

I'll take a look at the conscendo!

@deanhunter8329 3 жыл бұрын

Enjoyed your NX6 review. Much more to the point than many guys who post such stuff!!! I have the NX manual and it does not seem to mention swapping modes on the Tx. I am mode 1, all Tx's out of the factory seem to be mode 2. Can modes be swapped on the NX6? Thank you.

@deanhunter8329 3 жыл бұрын

I will reply to my own question - I bought an NX6 a week ago. The mode switch is simply achieved using 6 screws, no need to take the Tx case apart .

@ratelmike8825 3 жыл бұрын

Very good review. Is the NX8 very similar?

@mtnmyke 3 жыл бұрын

It will be very similar. The NX10 is where things start to change.

@evanhurtig708 Жыл бұрын

Great video. If you were learning to fly do you think the nx is worth spending more money or is the dx a better place to start

@martindavey8742 3 жыл бұрын

Might be worth waiting for this here in the UK, rather than buying the older model then?

@asifheliRC 3 жыл бұрын

Nice radio.

@johnmueller8448 2 жыл бұрын

Enjoy your new radio just bought the nx 8

@davidmarcus9756 3 жыл бұрын

Awesome video During COVID shut down I purchased the NX6 and used it for the first time yesterday July 13, 2021 Like you I am come from a DX6 Can you explain how to change the palette to the dark that you have? Does it have to be done plane by plan or is there a one shot deal? Would you know if there is a larger battery that will work with it? Thanks again

@marblox9300 Жыл бұрын

If you use this with the Flight Simulator you don't need the Dongle - just use the USB Cable.??? I thought the Dongle was for a Wireless Connection - how would the Cable be an improvement.???

@vertigo4ubob704 Жыл бұрын

I don't have TTevo in my bnf menu. Why? I've done the fware update. Clear as mud Spooktrum, from a rookie.

@billgregory884 2 жыл бұрын

I have received my NX6 and the only issue I have had is binding my existing AR6200 receivers, I have bound them both ways and all good, as soon as I have removed the bind plug and re plugged in the battery the receiver lights keep flashing as though it isn't bound. Funny when I bind them to my old DX6I I have no problems, your thoughts.

@crystalclearwindowcleaning3458 2 жыл бұрын

Thanks for the review. I'm ready to buy either a DX6 or an NX6. The NX is about $100 more, which could be used towards mostly paying for my 4th plane. In the long run, would I be wiser to purchase the NX, or will the DX6 serve me well for several years to come?

@davidmarcus9756 3 жыл бұрын

Great info, is there a way to see the screen better when flying ourdoors?

@best8063 2 жыл бұрын

Thanks for the Video! A question: Do these remotes work with every bnf plane or just with planes frim horizonhobby?

@musk-eteer9898 3 жыл бұрын

i notice that most women give better instruction than men

@ab7rs 3 жыл бұрын

thanks for the review, information on these is still rather scarce. I'm suprised you never even mentioned the TBS Crossfire compatibility (especially after spending time on a worthless feature like screen colors). I'm also updating from the DX6 to an NX radio...but which one? All of my receivers are Crossfire so it's a huge interest and selling point. Crossfire on the old DX6 worked but is cumbersome. Thanks again.

@RCGirl 3 жыл бұрын

Ah I'm not super familiar with crossfire, but thanks for mentioning

@ChristopherF_1971 3 жыл бұрын

XF ROCKS

@justray510 2 жыл бұрын

Still researching radios. I want to practice flying over the winter with X-Plane for iMac before I fly a real glider. Do I need the dongle or does connecting the USB charger/connector get me connected? I have a new iMac mini with M1 chip. The people from X-Plane have no idea if this will work with the NX6 or any RC TX for that matter, it will handle joysticks and other flight sim controls. IF it connects I will need to setup each control in the setup menu of X-Plane. I need to make sure it will connect with X-Plane because I really don't want to fly a real plane without practice. I live in the boonies and have farm fields around me so this is a perfect place for gliders. Not needing a dongle will save me some $$ I can use for batteries.

@preyingmathis2517 Жыл бұрын

So, lets say I get this radio and a e-flite T-28 Trojan 1.2m with flaps and retracts. Can this radio handle every function of the plane including reverse thrust? So, Throttle, Rudder, Flaps, Ailerons, Elevator, Retracts, Throttle Cut, Safe Select, and Reverse Thrust?

@WayneP1973 4 ай бұрын

Does it have the micro Draco 800mm on the BNF?

@mathiasbrofalk8688 3 жыл бұрын

I'm pretty sure the dx 6 has a diversity antenna too. I think it's in the handle.

@OldScorpion 10 ай бұрын

Allot of information thanks

@edwardcase Жыл бұрын

is it backward compatible with DSM2 receivers?

@aaronstrom16 3 жыл бұрын

I ended up with the NX6 because my DX6e broke only after using it for less than a year. When I transferred over all my models I noticed that switches B and G are reversed on the NX6 from DX6..Im not sure why that is but I wondered if you noticed any changes in the switch positions also.

@ObsidianJayMusic 3 жыл бұрын

dx has wireless too. my dx8g2 does at least, what it does not have is all the bind and fly models. be honest. spektrum sent you this to review and keep, but for those that don't have that luxury; would you recommend they upgrade? i am going to stick with my dx gen 2 until nx is replaced. they are way too similar imho. Good video you just missed the talkin point of your headline, is this new nx worth upgrading.

@lennyz853 2 жыл бұрын

For a few dollars more would the nx8 be better if you want to use safe select and turbo reverse?

@michaeledmonds3027 3 жыл бұрын

Another great instructive video, thanks. Question: I would like battery telemetry from an AeroScout S 1.1m BNF (ordered) that uses a Spectrum smart battery. If I use a new Spectrum NX radio, will I also have to add another gadget to the airplane for telemetry to work?

@mtnmyke 3 жыл бұрын

Not if the plane is listed as telemetry ready. Most of the Horizon bnf models are.

@tomanderson9979 2 жыл бұрын

Trying to follow this programming video. Looking for eflight T28 1.1 bnf. The only T28 I see is the carbon z T28. What am I missing?

@WayneCook306 3 жыл бұрын

Great job Thank you...

@tomanderson9979 3 жыл бұрын

Hi, new to your channel and just watched the nx6 vs dx6. Very well done. Did I understand you to say the nx6 is actually 7 channels?

@mtnmyke 3 жыл бұрын

It has 7 channels but one only works with SAFE. So for non safe models it's still a 6 channel.

@witoldsuszycki6729 2 жыл бұрын

Recently I have a new (first) NX6 transmitter. Unfortunately, English is not my best site, so I use "google translator" or if there are subtitles I force my language. Is it possible to return to the factory settings with one button (or two), in case of wrong configuration? I would like to configure "AeroScout S2 1.1m" (RTF) for my NX6 transmitter. Is there such a possibility? Thank You.

@mikebird9717 3 жыл бұрын

Can we use our NX6 for ground control. Also is air and ground frequency the same now.

@dronetrooperfpv7810 2 жыл бұрын

Is there any major differences between the NX models other then the amount of channels?

@loganm2934 3 жыл бұрын

Ugh why couldn’t they have used usb c....

@EJ3.16 3 жыл бұрын

Hello hello Rc girl excellent video thank you,, but since you are using the Nx6 can you tell me if the performance of this transmitter is good and I hear about this transmitter sucks a lot battery it’s that true?? Can you please let me know thank you...please honest answer..!!!

@w.j.bendellr.c.flying.1037 3 жыл бұрын

I have an important question and I need help, I have a DX6e and I couldn’t do my updates because I have an Apple computer and iPad. So yesterday I just got in my new NX8 just due to the fact I can do updates with Wi-Fi is this going to work? Please let me know thank you.

@DrWenChannel 2 жыл бұрын

So is it worth the extra $$ to upgrade from DX6e to NX6? Thanks!

@renecamek3316 2 жыл бұрын

Is it working with dsm, dsm2

@bradcolman7331 3 жыл бұрын

Perfect TX for you to try out on a COLLECTIVE PITCH HELICOPTER

@RCGirl 3 жыл бұрын

😳😳🤦🏼‍♀️ not sure that's a good idea! 😂

@williamhoodtn 3 жыл бұрын

You didn't mention voice alerts. Does it have that? I have a DX6e and it does not so this would be an upgrade for me if the NX6 (or NX8) has that. The HH website says it does but I'm just double checking.

@RCGirl 3 жыл бұрын

It does have voice alerts. You can even program in your own sounds and set those to a switch

@martindavey8742 3 жыл бұрын

Yay...I now have one! :)

@shivoxmuvo9460 3 жыл бұрын

Where can i buy this radio

@josephayala1090 3 жыл бұрын

Good day to you RC Girl, I’ve recently been watching your KZfaq channel & I really like how you are very informal about the products you review. It’s been a while since I’ve been back to the RC world but I miss it & it’s great to be back in the hobby. Thank you for your inspiration, I have an old Spektrum DX6 that I hardly use & having an IMac Computer is not the same as a Windows baised PC so updating firmware from different sites is very annoying. Do you think it’s worth purchasing a new open TX transmitter like the Radio Master 16, or would it be better to just stick with or upgrade my Spektrum radio?

@gavinw77 Жыл бұрын

If you find things annoying - don't get a RadioMaster - I have one, and just managed to bind it to a Spektrum plane - but it's not straight forward, changing from OpenTX to EdgeTX, settup up everything, working out how to bind, and manually configuring inputs/mixes/outputs. It's a really manual process. If you want things to be straight forward, stick with Spektrum. Some people complain about eco-systems, but eco-systems are good. Things work together and work well with little effort.

@bobpug 3 жыл бұрын

How about changing to mode one? easy?

@johnmueller3573 3 жыл бұрын

Great video

@shreddinjoe 3 жыл бұрын

Hummm...beautiful and loves to fly????? Im in love

@Tallguysrc 3 жыл бұрын

Im going to do the nx10

@ramonotnet 3 жыл бұрын

its only for airplane, drons and elicopters?

@johnrobinson1140 2 жыл бұрын

is the NX6 worth it? I dont know, I bought the NX8 😏

@JohnCuppi 3 жыл бұрын

$300+ for a 6 channel transmitter in 2020 (2021) is insane. You get 1 switch for arming + modes if you use a drone... yay.

@JohnCuppi 3 жыл бұрын

@@miksterr Yeah, if you're a horizon hobby only plane guy who doesn't want to program a radio ever, it's great I guess? For everything else, this is a very lame value. This should be at LEAST 8ch for this price.

@roymoon1 3 жыл бұрын

Or upgrade to the Radiomaster 16ch for $130

@ChristopherF_1971 3 жыл бұрын

Feel same, 6 channels is a joke. Love my Frsky X12s and even my radiomaster T18pro. Plus Opentx opens up a whole new world of use options and capabilities.

@ObsidianJayMusic 3 жыл бұрын

@@JohnCuppi dude most of us fly planes and aren't standing with dorky fpv goggles on. stick with your 16 channel