41c! Wow I would melt!

Hey RC Tanks & Trucks 24/7, I bought the same one for my 5yr old sons birthday and the drive power shuts off when landing from small jumps or when climbing slowly over obstacles and I have to cycle the on/off switch. Any thoughts on this?

So i've seen there are many different versions of this car down to the wl toys brushed version. people with the burshed version are running 3s batteries with a low C value. Is that still doable on the brushless version with the different ESC or are you forced into sticking to 2s with a normal or high C value? 3S low C brushed is perhaps faster than 2s high C brushless in this car?

Hi! What do you think about the brushed version of FY03H? Is it as cool and durable as yours?

Awesome, I love hearing that my videos helped you decide to purchase it. Great stuff :)

Thanks man and happy new year to you

If I’m correct vattera twin hammers is 1/10 this is 1/12 wouldn’t work sadly

@@colbyturbeville2946 my mistake, you are correct. 👍

But there are still a lot of metal upgrades for this car 😁

@@colbyturbeville2946 yes there are. When I made the original reply/comment I had it in my head that the WL Toys version is offered in 1/12 and 1/10. And that one would really benefit from the vaterra factory and upgrade parts. I do like this version better than the wl version for out of the box looks and features.

Yes the wltoys 10428 is 1/10 so yeah there are a lot of upgrades for it unfortunately I got the 12428 and it’s absolute garbage got it bout a month ago I’ve replaced esc servo and motor already and 2 drive shafts and no I’ve not drove it for over 10 minutes without something breaking sad ain’t it lol so I’ve orders this and I’m hoping it’ll be a lot better and not a money robber do you own the feiyue fyo3h if so what’s are some of its weaknesses

Much appreciated bro

Thanks bro, yeah I might slam a lipo in it and see how it performs

Happy new year to you and your family Tony 🙂

It doesn't seem to wanna stay on its wheels lol

Actually it's "cantilever" shocks buddy. Not counter lever.

@@cwatson42785 Cheers mate that's what I meant. 🖒

@@Aussieknuckleheads I gotta ya bud. I know what you meant. Cheers

Happy new year to you too

Thanks brother

Yeah neither have I

1st out runner rc car rtr . very interesting

Happy new year to you as well 🙂

They are interchangeable on bangood when you look up upgrades for the wltoys the parts all say feiyue and wltoys, and I have a hbx transit and I think a lot of the parts are the same on that as well.

Little champ 🤜

Cheers Todd

Might make it a little hand grenade 🙂

Yeah I checked that. It was on high speed mode. It will try it on lipo and see the difference

He didnt have it in high speed mode on the controller, he didnt peel back the sticker and turn the key, i hope he was on a fully charged battery

Overall good for the price. Check out the link for all the info. I have bashed mine and it is still going strong.

Hmm not sure bro. That's weird

I just got the hbx transit and I need to do that, I tried 100k fluid which made it way better but I still want it fully locked or almost like kevs.

Brushed will wear out faster, better for low speed crawling type controlled runs. Brushless gives you more speed, no brushes to wear out and stays cooler than the equivalent.

No, cable ties

That's strange

Ignus Fast add oil to the shocks.

@@Cr125stin The shocks on the older model weren't sealed. I'm not sure about this one.

And they have metal upgrade shocks for 10$ a pair problem solved.

@@IgnusFast they weren't sealed but the upgrade ones are and if those aren't then the hbx shocks are I think those would fit it.

Silberner Surfer yes it does check out Kevin Talbot for more info... Type in feiyue fy03h Kevin Talbot and click on the vid with the car on the red bull can

Yeah it does. The esc I don't think it can be programmed.

@@RCTanksTrucks247 it can be calabrated @kevin talbot did it in his review... ill give you the link here ---> kzfaq.info/get/bejne/lbdoa5pottLUcqM.html

Thanks and yes it has metal internals

Sorry no. I don't have them anymore

Yeah pretty much

Great value

Yeah

@@RCTanksTrucks247 ok I'm defenetly getting this

NSW

QUEENSLANDER!!!!!!!!!

Cool I'm in Victoria

Yeah very true

Cheers man

@@RCTanksTrucks247 sorry about the caps, i just had to get your attention since it was posted awhile back, but trust me its a good crawler, i have both li-ion and lipos- i use li-ion on 50-50 with children model then i switch to 70/30 and lipo battery for controllable speed, different batteries different power levels for different terrains, once you break in the “stiff” rear shocks, its softer and handles better but plz trust me, REMOVE THE REAR TIRE, And the car will drive amazing

@@RCTanksTrucks247 before you switch between 50/50 and 70/30 you have to turn the car off, switch it , then turn it back on…..slow crawling- li-ion/50-50 child/high speed If you want more slow torque go with lipo, 70/30 and child mode

Should be simple like adjusting the throttle trim.

@@RCTanksTrucks247 No Sir, I tried all that before I reached out :). I bought a programmer for the ESC but it will take a month to get here before I can try it. I can't find any info online about manually programming the ESC. :(

Same for the roof or road here.

@@RCTanksTrucks247 what's a Strimmer called again? whipper snapper 😂 love you ozzys 🇬🇧

Sorry I thought I went over them. There isn't much more technical information on it. I will see what size Lipo will fit but I would say around 2200mah 2s.

No it;s NOT....The 12842 is wider. The differental are DIFFERENT. The Fy03 has 4-ea spyders...All metal. The wltoys has 3-ea plastic The cups/bevel gears are different...The gear PITCH are different. The only thing that's interchangeable are the wheels and hex... The damn hex pins probably arnt even the same size. The reason the use the out runnner is mostly so the factory can use the same PINON set. it's either a 2212 or 2218 has the same SHAFT size as a 390 brushed motor. The wltoys has a 550 brushed which has a different shaft size.....Even the gears from my 1/12 HBX/redcat or Subotech wont work in the Fy-03. The gear pitch are finer...IDK...it;s NOT 48 pitch. Those trucks are about the same as a Traxxass to the Losi.lmao There's plenty of parts avalible for the Fy03..but DUNNNN buy 12842 for them. Ive converted plenty of fy03 to brushless using 2845 3100 or 3300 kv. 60A 3s 40c It has the same can size as the 390 brush so it'll mount on the stock motor mount..but the SHAFT size is bigger. You'll have to ream the shaft hole using the extra pinons that comes with the truck...and basically chuck the stock electronic or use it on 1/18 protects.... Mine are faster than out of the box BL...all my toys are faster than out of the box.lol The truck is fine stock...becuase it's not super fast or over torque. If you want it faster....stock up on center rear CVD and shim the differentals. There's metal center CVD avaliable...but donst matter...the PINS in the cvd will wear out the CVD..either way from over torquing the truck... Mine dose a back flip from stand still and wheelies on command..but hell on the drive lines and differental gears....(which is all metal from the factory). It'll last or do fine on 2s.....The wltoys would simply strip if you go brushless without upgrades. The suboteck truck comes with all metal differental gears/cups..that will work with the wltoys 12842...the dogbone are actaully thicker than my 1/10 volcano

@@oneeyemonster3262 ok man you seem to know everything yes no shit the pitch is different you can change the spur and pinion and motor on anything tell me why all the aluminum parts from wl toys fit mine perfectly? Tell me why even the virhuck 6x6 version even shared the same parts? Nice long rambling rant but you accomplish nothing I own this version and the virhuck 6x6 all three share the same platform same front end geometry. Same rear solid axle with the same gear ratio I have wl toys suspension and mounting and front top plate on both of mine they fit perfect. Just because they change the motor and spur gear and pinion there all the same exact platform and trying to sound smart saying there as close as losi and Traxxas real funny but they are as close as hsp and red cat I've had every brand of RC that is available in the US and team magic I can tell the difference between them dick small off the China wharehouse shelf changes aren't what I'm talking about there all the same platform

@@theirishaxe9405 it's not 48 PITCH. There's plenty of videos of people stripping the wltoys and comparing it to fy03. The WLTOYs 12842 has PLASTIC bevel gears attach to the drive CUPS which will strip over time or need Up GRADE before doing BL conversion Becuase the virhuck and the Fy03 is the SAME truck ...and the 12842 and Fy03 ISNT the same truck....DORK. Becuase it WASTE TIME and MONEY ordering the WRONG PARTs that wont fit....MORON. Becuase some people might want to UPGRADE to a 2845 in runner BL for more power....which drop right in ..( but will need to enlarge the shaft size)....I dont WTF actually size that is...Otherwise I just order a 30T-32T so one of mine will do over 45 mph.lmao You can.t just swap out SPUR/PINON to 48 or 32 pitch without doing research..Theres different Shaft size . How they're mounted. Plus stock Fy03's spur's shaft has brass BUSHING... It works fine if not over torque....It cuase problems or need to be upgrade to a Bearing to prevent the spur/clutch from coming un torque all the time if you use a more powerful brushless motor... Plus The PITCH size of the Main center shaft gear.lol Even the after market parts metal CVD for the FY 03 wont fit right..if you dont modify it...Even the SERVO HORNS are different size Gear PITCH..from brand to brand...You'll need a longer servo horn screw in order to use the servo horn saver..if you wanted to up grade to a MG or more powerful steering servo...becuase the damn PITCH of the screw are different from the stock servo screw. I know how to make my T Maxx do 50 mph...You'll have to order the proper parts...There's also differences in 2.3 or 3.3...ect The parts on my T Maxx wont work on my MGT 3.3 The MGT 3.3 parts wont work on the 4.6. Even the different 1/8 buggies arnt compatible..They all have different A arms/ knockles style. Even on some 1/8 Losi buggies..you cant simply just slap in a Bruchless motor from a nitro...It's too much torque for the nitro differentals..you'll need to upgrade it to 4 spyders.oki doke.