Subscribe!

I love all of your videos and hope you never stop!

You should have steve make a video on how to calabrate an esc

wow that looks great, the controller is super for L & R great vide and thank you for sharing kevin

I have the original version and it has lasted great for a couple years now. Real metal differentials are wayyy better than the WLtoys competition. I’d love to get one of these and try it out. I love my old FY-03! Insanely tough and cheap.

CONGRATS FOR 200K SUBS KEV

Hi kev! I love your vids and your my favorite youtuber, keep up the good work!

That thing looks insane!

Hi Kevin i been watching your videos their pretty damn good!! These videos put me in a better mood :)

Am Happy your doing affordable Rc trucks Kev and giving them a good Test, fantastic review and and Fantastic video bro 😎

Cool video kev!!

Hey Key!!! I haven't seen a vid for a while, it's great to be back!!! Once again another banger vid!!!

Hi there. Thank you for this video. One question: how do you calibrate the ESC that comes with this car??? Thank you

Great video guys 🤙

They better not let traxxas see those front shocks lol

1:00 "He's in"! That's what she said.

Good video kev 7th liked keep up the good work

It's kind of alarming when Steve talks normal

Ok out of the box, those tires are so aggressive. Nice review kev! Keep it up!

Lol I paid a few days ago about 55 pounds for a quite toyish RC and while you can get this level of RC for so cheap... Keep up the good work Kev and have a Happy New Year :)

Thank you for the review fine sir.

Fair enough, subcribed!

Great vid

Plz do more expensive rc vids kev... I enjoy those a lot

You forget checking the two speed control on the remote! Im a great fan from Argentina!

That’s sick

Power on 2s lipo is pretty impressive! 😎👍

Be interesting to see how long the alloy body panels last when bashing.

Nice video kev 👍 not a bad rig 😎

put 2 round neoprene/rubber servo grommets on a small screwdriver shaft, carefully slice out smaller center tube section with a hobby knife, you have your 4 oil seals for the shocks. mount flat side up, tighten threaded lower cups that hold them in just decently finger snug. 30wt in rears, about 80wt for the fronts (shorter with heavier springs), it won't bounce after.

Kev, do you use threaded pins in the RPM Xmaxx suspension arm? And you forgot to put the link to the crawler in the description

What a beauty! Mine is on the way in red too, and should arrive soon!

Love the content lol

Loving the videos boss have you anything planned for Christmas bash

Both of those are pretty damn cool that green one seems like you can beat the hell out of that thing👊👊👍👍👍

Got 2 of theses for Xmas kids first cars.mate as one and it's taking a good bashin.

Kevin, do you happen to have the part number for the 2S LiPo battery you used? Would you recommend running it in the WL12428. Just got my WL because of wathcing you channel and love it, thank you. But of course looking to get more batteries and figure going 2S LiPo would be the best bet. Enjoining the vids keep em coming new to the RC hobby

Dam I want that u have an awesome job

@Kevin Talbot the only issue i see with this for US buyers is it only seems to come with a EU style plug, so we would need a adapter i am guessing? Thanks for the reviews I am getting back in to RC and i figure start off budget so these vids are helping a lot

Why would anyone dislike an awesome video on an rc car

I want one of these! I'm planning on putting a 550 size crawler motor in and some 2.2 Mudslingers!

you can fill the shocks with oil but need plumbers tape and some little orings in a few places. it does help the car perform

I love these cheap car reviews!

Hello Friend! I own FY04 and FY06😁 (in addition to E-revo, Revo, Revo Platinum, X-maxx, Slash Platinum, Spartan, Trx-4, Cen Gst 7.7, Hpi Baja, Rc4wd 1/18, Tamiya Tundra and various others), and I must say that the small Chinese, in the garden have their own reason. 🏁👍😁

I love you guys .

Hi Kevin thinking of getting one of these Feiyue FY03H! Are the brushed and brushless the same apart from the motor and esc? Because they also do a brushless motor and esc upgrade for it and was thinking of getting the cheaper brushed and converting it to brushless with the upgrade kit! Thanks

I really enjoy your videos keep it up bro and good luck with your dreams. I have A question if you don't mind to advice me. What program do you you to edit your Videos before you upload them on youtube? Hope to hear from you soon?

Steve is back!

The esc is actually calibrated, it's just the controller have a limit, there's a key included in the box. What you just did is you just limited your throttle resolution.

Steve you know how the hbx transt 8s steve done a conversion to bruszless can yo do somethin like that without changing the esc on it pls answer ???

Thanks found the car im gonna get me an my two sons to get into something we can do together

Hey Kev love your videos. I recently got that little monster , about 3 days now and i think i have some issues with the transmission. It has some serious delay in throttle and reverse . What's your opinion and advice 😊

Kevin I saw a video on the Smax where they submerged the truck in a fish tank and ran it. Crazy!! I checked out some videos and it didn't look bad at all. Looks fast and durable. So I ordered one. Received it today. Great looking machine. Fast too for it's size. Check it out sometime 😁👍

Here in california those desert buggys are call "Ultra Four's" they race in the hardest 24 hours offroad race in the world called King of the Hammers here in Johnson valley california they are built for extreme rock crawling and high speed 100mph + on open desert.

I always enjoy seeing new stuff like that. You might be able to stop the one front tire from lifting up on take off if you put thicker fluid and stiffer shock spring on that corner

you should put like crawler servos and stuff in that to make it slower and then go crawling with it

this brand makes a brushed version of this truck and also have 6*6 version and other models

Kev just an idea for the HPI savage you can buy little supercharges for those nitro engine and it would be a cool video? Just putting it out there 👍🤟

Rig looks cool controller is cool to different

I love RC cars

There was a "SPIRIT" on camera at 1:30. Right after the car drops a light Orb flys across the bottom of the screen.

Hey Kev, do you have a link where I could find those purple hex drivers?

OK I have to ask ... are all these similar looking RC parts interchangeable with the WLToys ?they all look identical just different colors ?

Cool

Great video Keith. What's the 'optimum' battery to purchase with this vehicle for max power and runtime? Forgive me for being a 'noob'. Oh, and are there any other 'essential' purchases that I should consider at time of purchase? Banggood appear to be best priced. Thanks, Norm.

Does the FY03H have schocks that can be filled with oil? Which programming card could be used for the ESC? Thanks in advance! :-)

I like feiyue eagle 3 because is really good

0:57 you had to put a subscribe sticker inside lol)

Seems pretty legit.. Cant wait for my wltoys to come in next week.

They are nifty little things for the money. The motor is a little puny for slow crawling but it does everything else well and sounds cool. Outrunners traditionally have more torque but seeing as this one is the size of a 280 brushed motor it's a miracle it works as well as it does! A brushed 280 in this truck would literally burn out in seconds. I had the same motor in my FY06, I switched to a 540 eventually for the better low down torque but the little outrunner is doing a great job in a 2WD buggy now! Chinese stuff is getting really good. I could just hear people's teeth gritting when you called it hobby grade but that's exactly what it is. It's more capable, better specced and designed in many ways than an entry level Tamiya or Kyosho.

Ive got that body shell on my ftx outback

is the FY03H desert eagle brushed waterproof or water-resistant and can you get upgraded

Looks BETTER than the 12428

Im still waiting for a Kyosho Outlaw Rampage review🤔 its a really special kind of a chassis

Hey man i seen an ad on Facebook today that was using footage from this video to promote product. I tagged you in it on Facebook in case they didn't have the rite to use it

Kev I really love your videos but I think it would be great if you used some of your more expensive rc like the xmaxx erevo udr and notorious instead of all these bang good cheap rc, just my opinion

would you recommend running 3s lipo on this ?

Any day is a good day when kev uploads another video!

Pls, What's the difference between brushed and brushless rc cars?

I subscribed

what is the battery that you put in there please mate? thankyou

I have received the red one! inside the diffs is red grease! Is the grease inside the silver ones silver?

Can you do a video of filing the shocks with oil for the WLtoys

You make great vids, especially the editing and your music montages. And I was wondering if you could do a wl-toys giveaway I would love to enter

Love you

I bought an hpi e firestorm flux and it came with a trackstar 5.5 t motor for $80 what is your opinion?

Steve is the man

I have the eachine eat04 showing up tomorrow You mentioned calibrating thr esc for more power....how do I go about this does anyone know

Alittle update, i actually have the gizmovine 1/12 desert eagle in green fy07 and although it basically has all the same parts, its way different, PS: Take off the rear spare tire for better cornering and with that less weigh you can control it “drifting” way better

Check out that articulation on the cover

How did hi calibrait the esc to go faster

Can someone explain how he calibrated the rc car?

What do you call the model of the radio-controlled machine?

I want one like that

How do your calibrate the esc?

Kevin can you do some videos on other cars besides these, small cheap crawlers.

how did you calibrate the ESC

How to calibrate the throttle range? Tried, but failed! It isnt in the manual! Thanks!

Would you be able to do a review on a FTX Mauler please because I’m thinking of getting one ❤️

hi kevin i have a 3.0 car from losi ten scte i am converting it to electric but i could not find a motor mount if i found it does not send it to turkey can you help me