ReadyLIFT F-150 2.25'' Front Lift Kit, INSTALL

Рет қаралды 36,281

5 жыл бұрын

www.steeda.com/ReadyLIFT-F-15...
Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLIFTÂ® can be installed one to two hours and costs less than the price of a single custom wheel. And the 66-2215 front leveling kit qualifies for the ReadyGuard 5-year/60K Mile Power train Warranty.
Product Benefits:
- Keeps your factory ride - Guaranteed
- Will never wear, break or fail - Guaranteed
- Safest way to level lift - Guaranteed
- CNC-machined billet aluminum construction with 10.9 rated mounting studs
- Safely installs without compressing struts
MADE IN U.S.A - This #ReadyLIFT CNC machined billet aluminum kit was designed specifically for the new 2015-UP Ford F150 trucks. The strut positioning is different on 2015 trucks requiring the development of a new front lift system to lift the front of the 2015-2017 Ford F150. Using the highest grade material available - CNC Machined 6061-T6 billet, our engineered developed the ideal front lift system to bring the stance of the new F150 trucks up to a near level position. A exact level stance is not achievable on 2015 4WD F150 trucks due to the geometry of the front CV axles. 2.25" is the safest amount of front lift obtainable on these trucks while retaining the factory ride and geometry requirements.
Subscribe: bit.ly/Steeda_YT
Shop Ford performance parts at www.Steeda.com!
Purchase these parts directly from Steeda:
MPN: 66-2215
Part: 645 66 2215
---
Steeda Website:
www.steeda.com
Steeda Europe:
www.steeda.co.uk
Steeda Facebook:
/ steedaautosports
Steeda Instagram:
/ steedaautosports
Steeda Twitter:
/ steedaautosport
Steeda Blog:
www.steedablog.com/
#ReadyLIFT #LevelingKit #F150 #F150Upgrades #FordF150 #Steeda #SteedaTrucks #SpeedMatters

Пікірлер: 33

@raging_rhino2582 Жыл бұрын

THANK YOU for showing the "knock out the strut bottom bolts" that was the key we needed to get through it

@mictdave1 4 жыл бұрын

Thanks for saying the torque specifications. You’d be surprised how many of these type of videos leave that out.

@steedaautosports 4 жыл бұрын

No problem! We like to try to cover all of the bases!

@motivationalgaming9092 3 жыл бұрын

Thanks for making this video, professional work and awesome knowledge. Watching this made me decide to have my kit installed by professionals like you and to not try and do it myself. Keep up the great work!

@zachddt7589 4 жыл бұрын

how do you measure the kit itself? Hard to explain exactly what I mean but does that puck measure out to 2.25 or do the bolts have something to do with the lift too?

@seanjohn7011 2 жыл бұрын

I have a 2015 f150 that I leveled a couple weeks ago 2.5 with 22” wheels on 33 tires and I knew some ride quality was going to be gone but when I hit a bump or rough spots in the highway it seems to throw my truck sideways one way or another kind of like it comes off the ground but definitely seems like I lose control of it while I’m hitting that rough spot in the highway I did all that at the same time so just asking what would be the problem haven’t had time to go back to the place that did the work but I never seen anybody else mentioned anything like this just trying to see where I or them go wrong thanks in advance your truck looks great

@MormonMustang_ 4 жыл бұрын

Any differences with install between 2 wheel and 4 wheel drive?

@fordrangerlifts5422 2 жыл бұрын

You can just rotate the complete strut 180°.

@patrickleigh 3 жыл бұрын

Must not be a 4wd? No need to pull vacuum to avoid IWE issues?

@S0lidStewie 3 жыл бұрын

Why do you have to rotate the top plate 180 degrees???

@streetslayers410 5 жыл бұрын

Is a front end alignment required after installing?

@steedaautosports 5 жыл бұрын

YES SIR

@dieseldavedick 4 жыл бұрын

Do you just plug that vacuum line back in and its good too go?

@steedaautosports 4 жыл бұрын

Yes Sir just make sure it's on snug

@JoelReeves2006 2 жыл бұрын

You didn’t show how you disconnected the 4WD

@CS-vr3zx 3 жыл бұрын

ReadyLift says you do not need to compress or modify the strut or spring during the install ?

@WilliamL1988 3 жыл бұрын

I was watching a few different videos to see if everyone uses a spring compress tool. I'm just wondering why the top factory spacer was rotated?

@S0lidStewie 3 жыл бұрын

Yea I was wondering why he turn it 180 degrees???

@CS-vr3zx 3 жыл бұрын

I went with the Fox 2.0 leveling struts and couldn’t be happier . More money , but less work and better ride quality.

@JoelReeves2006 2 жыл бұрын

Why’d you rotate the top strut cap 180 degrees? The other kits don’t say to do that.

@ijw7801 2 жыл бұрын

If u didn’t find out yet, it’s because the two bottom bolts on the strut are at an angle, then when u put the leveling kit on it will make the 3 upper studs face the other way and the angle at the bottom would be opposite.

@jonathanhaney5673 Жыл бұрын

@@ijw7801 you can just mount driver side on passenger side… most people don’t know this

@john123347 4 жыл бұрын

Is it a good idea to replace the upper control arms? Or any other factory components ? I want to install this kit but don’t want to wear out factory parts

@buffalobmf 3 жыл бұрын

I had mine dealer installed when i bought my truck. It doesnt even void the factory warranty so you should be fine any higher you might want to then of course you have your cv to worry about too. But it’ll definitely wear out parts faster no matter what anything will. Its just a how fast its wearing not if it will or not