Reasons to keep your Evolution Rage 5s in 2021? HD 1080p
Рет қаралды 9,751
2 жыл бұрынOk, so I had a couple of packages arrive from Ebay and I'm excited!...and I had to do a quick share.
Regulars will know I've had the rage 5 for some time and was looking to upgrade. With all the 2021 supply problems dithering gave me a long time to window shop and my wondering eye has wondered elsewhere.. so my first "Grown up" Boys Toy is arriving shortly- and its NOT a replacement table saw....
PUT YOUR GUESSES IN THE COMMENTS SECTION BELOW!
( answer to follow in next but one video)
So with encouragement from youse guys and 3d printing developments reaching Ebay I'm fettling my old workhorse! This is just the first go an occasional series as I restore the Rage5 and bling it handsomely!
Please look up Tomasz of Casual DIY ( if you don't already subscribe):
/ casualdiy he's a good source for rage5 stuff!
"Crack on"
Loz
@CasualDIY 2 жыл бұрын
Great video 👍 and thank you for the mention and kind words😁👍
@spwood86 2 жыл бұрын
Hi mate thank you for the nice comments and reviews of my 3D printed table saw accessories.
@PhilsWorkshop1953 2 жыл бұрын
Hello young man great vid Lawrence and thanks for the mention I enjoy helping people for me it’s a great feeling looking forward to your upgrades
@richsmart321 2 жыл бұрын
useful video - came across this while watching Tomasz' videos on the rage 5s (I purchased one BEFORE I watched the reviews!) & yes his videos are great. Appreciate some of the things you have covered as well though - the table saw sled rails but the router table blocks are bang on & Im definitely going to get those. I bought a tooltronix bench mounted one at the moment & it is absolutely awful - it has grooves on the top surface, which causes material to get jarred sometimes. Its so bad its going to the tip as soon as Ive built a router table top using these table blocks. Keep pimping the Rage - looking forward to future videos!
@KenPem 2 жыл бұрын
Thanks, Grumpa! You've given me the inspiration to spend an idle (i.e. wet) Sunday stripping down, cleaning, fettling and rebuilding my Rage 5. Slot runners and big stop switch ordered. Haven't been able to find a zero-clearance plate yet...
@LTWCarpentry 2 жыл бұрын
Can’t wait to see what you do with it mate
@Smallbarnworkshop 2 жыл бұрын
Loving mine. I need to check some of those accessories out. 👍
@johnallen8680 2 жыл бұрын
Adding the 3D printed upgrade bits and a *soft start module ( *See Casual DIY channel) really adds to this good value saw.. As for the tired fence you could just order a replacement.
@Nitecrow314 Жыл бұрын
There is a nut to adjust how tight the fence clamps!
@lafamillecarrington 2 жыл бұрын
I couldn't believe the amount of gunge in mine - it was severely limiting the movement of the blade assembly and had been compressed over the years. Took a lot of scraping out, but all good now!
@HarmonicGrunt 2 жыл бұрын
Thank's buddy , just ordered Router Blocks & Mitre guide.
@HarmonicGrunt 2 жыл бұрын
@@GrumpaLoz cheers buddy.
@EclaWood 2 жыл бұрын
Terimakasih banyak atas informasinya
@MD-gc4xq 2 жыл бұрын
Nice one I didn’t realise you could get the inserts already made up on eBay
@johnvodopija 2 жыл бұрын
Agree the saw is best bang for buck. Had mine for a few years now and only recently bought a third party mitre gauge (see the Hooked on Wood channel). Also, I’ve used Bosch full curf blades and have had no problems. Cheers 👍😎🇦🇺
@johnvodopija 2 жыл бұрын
@@GrumpaLoz I’ll let you know when it arrives and I try it out. Cheers
@contessa.adella Жыл бұрын
Purchased mine in 2020….not unboxed it yet!!!! No room to set it up…
@GrumpaLoz Жыл бұрын
oh, noes!
@neilatkinson7259 2 жыл бұрын
Saxton have good quality blades available for the Rage 5s too mate.
@Everythings_Adjustable 2 жыл бұрын
🛠️👍😊
@jackcunningham7197 2 жыл бұрын
They come 1800 and 1500 watt, do you know if there's a difference in them by much?
@GrumpaLoz 2 жыл бұрын
Hi Jack. I believe the original rage 5s had the 1800watt and there is a newer model with less accessories around the fence? Not sure. If yo saw my last video, health issues have kept me out of the garage past few weeks , but I have upgraded! 😱
@jackcunningham7197 2 жыл бұрын
I'll check it out.hope your feeling better soon.
@GrumpysWorkshop4 2 жыл бұрын
Looking forward to seeing what you do
Projects For All
Рет қаралды 31 М.