REBUILDING A WRECKED 2020 VOLVO INVOVED IN A POLICE PURSUIT PART 2

No video

REBUILDING A WRECKED 2020 VOLVO INVOVED IN A POLICE PURSUIT PART 2

Рет қаралды 139,071

Күн бұрын

We find additional Chassis damage on the Wrecked 2020 Volvo. Is this the reason the body shop decided not to repair and sell to us ???
Jenny Chem Link: SALVAGE23 for 15% off
USE CODE :- SR10 for 10% discount on your Car Vertical Check. Get 10% off car vertical with this link bit.ly/Salvage...
Instagram For daily sneak peeks :- www.instagram....
Instagram for Chris and what he gets up to away from the channel / salvagerebuildschris

For all sponsorship, Business /media enquiries please email :- rebuildssalvage@gmail.com
Please note Rob and Chris cannot be contacted on the above email as we do not have access. If you would like to get in touch please use private message on Instagram and always include your contact number.
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating , Body work , Mig Welding , Sheet metal Spot Welding , Fabrication Chassis Repairs , Engine and Mechanical repairs , #Restoration and Structural repairs on the Celette Jig .
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds , Quick flips , First wash , #Repairs , Salvage , #Restorations , Will it run , Will it Start , #Fail , #Accident damaged , Cat S , Cat N , Cat X Copart auction bargains , Non Runner , NON Running , Banger ,Flood damage , insurance write off , #fire damage , electrical fault , #stolen recovered , Unfinished #project and anything else that arrives
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, RS Turbo , Lambo , Land Rover , MG , MGF , Caterham 7 , Ford , Cosworth , Vauxhall , Fiat , Peugeot , Mercedes , Range Rover ,Bentley , Morris , Renault , Citroen , Honda , Toyota , VW , Series 3 , Evoque , GLA , Golf , 500 , Fiesta , Astra , Polo , Motorhome , Auto sleeper Camper , GTI , LSE , Lamborghini , Gallardo , LP 570-4 , Sierra , Midget , 360 , Transit , Crafter , Transporter , T5 , Combo, Berlingo , Partner , Mini , Beetle , Vivaro , Hilux , Sport and many more!
If you have a vehicle for sale that you think will be of interest to us please message Rob via Instagram and please include a contact phone number. We buy all sorts of vehicles , Boats and classic cars including Austin , Morris , Healey , Mg , Sunbeam , Talbot , Opel , XR2 , XR3 , XR4 , Bentley , Jaguar XJ6 XJ12 XJS , E Type , XKR , BMW E36 , 205 GTI , VW GTI , Viva , Astra GTE 2.0XE , Red Top , Triumph TR , VW Golf Beetle , Rover , MGB , 2CV , Midget , Nova , Chevette , Capri , P100 , lancia , Cortina MK1 Mk2 MK3 MK4 MK5 , GT6 , Jensen , Lotus , Bedford , J type , Minor , Datsun , Toyota , Sunseeker , Princess , Fairline , Windy , Hardy , RIB , Shetland , Fletcher , Bayliner , Searay , Pilot , Shakespere and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point , Makita , Sealey , Clark , Esab and Sykes-Pickavant .
If you are interested in a specific tool, please put your question in the comments section of the relevant video
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating, Body work, Mig Welding, Sheet metal Spot Welding, Fabrication, Chassis Repairs, Sand Blasting, Engine and Mechanical repairs, DPF cleaning, Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds, Quick flips, First wash, Repairs, Salvage, Restorations, Will it run, Accident damaged, Cat S, Cat N, Cat X Copart auction bargains, Non Runner, Flood damage, insurance write off, fire damage, smoke damage, electrical fault, stolen recovered, and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, Land Rover, MG, Caterham, Ford, Cosworth, Vauxhall, Fiat, Peugeot, Mercedes, Range Rover, Morris, Renault, Citroen, Honda, Toyota, VW, Series 3, Evoque, GLA, Golf, 500, Fiesta, Astra, Polo, Motorhome, Auto sleeper Camper, GTI, LSE, Sierra, Midget, 360, Transit, Crafter, Transporter, T5, Combo, Berlingo, Partner, Mini, Beetle, Vivaro, Hilux, Sport and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point, Makita, Sealey, Clark, Esab

Пікірлер: 385

@leerose9694 Жыл бұрын

Love Chris’s new party hat 😂

@kevinmccormack5192 Жыл бұрын

😅

@organiccold Жыл бұрын

😂🎉🎉🎉

@paulgibson490 Жыл бұрын

Beat me to it 😂🎉

@johnhulkes8896 Жыл бұрын

Looks like the tin man.

@adamweston4152 Жыл бұрын

Looks like puddles the singing clown 🤡.

@kenrossaukrsa Жыл бұрын

Chris is not losing out by been stuck in the workshop all day long , it’s a big ball ache to drive around in the UK.

@peterjones6733 11 ай бұрын

The balance of styles between Rob and Chris is, perfectly complimentary, and a huge part of the success of this channel. It’s been good watching Chris evolve from the mysterious shape in the background, to cameraman, comedian, and the other part of a perfect team!

@hydorah Жыл бұрын

Wow that geezer from Birmingham deserves his shout out! What a hero Peter Shaw is! Hope his meeting was a success 🙂

@hydorah Жыл бұрын

18:53 it's like Chris is having a little party. He deserves it

@geddonmeansome9834 11 ай бұрын

Chris is a different person from when you first started, much more confident. Rob you've brought him out of himself, well done.

@philipmulville8218 Жыл бұрын

‘You can’t beat a bit of localised damage’ - definite candidate for Quote of the Year from Chris right there. Brilliant video from SRUK.

@birdman4274 Жыл бұрын

19:00 I thought Chris was wearing a party hat 🤣🤣

@andrewwilson1118 11 ай бұрын

I know people who have had horrible experiences with repaired cars , pity there are not more people like you. 👍👍👍

@briansmith262 11 ай бұрын

winced a bit watching Chris drilling out the bolts without eye protection, shards of metal flying everywhere, otherwise another great vid guys.

@peterstanford9720 Жыл бұрын

Your integrity and attention to detail makes these videos very compelling and is a credit to you both. Your success is absolutely deserved.

@ferglesnerk Жыл бұрын

8:28 Only got one pair of eyes. It only takes one pair of safety glasses to look after them.

@joshevans8110 Жыл бұрын

Do you need a tissue?

@ferglesnerk Жыл бұрын

@@joshevans8110 Chris might while he's on his way to hospital.

@mathieubroersma Жыл бұрын

Wear some eye protection Chris when you are drilling out spot welds and such. Just one small piece in the eye and you’re off to the emergency room. Great video none the less 👍🏻🤠

@dieselbushcraft1299 Жыл бұрын

I never tire of watching Chris’s attention to detail when he’s working on a vehicle.

@-DC- Жыл бұрын

Anytime Chris says he's quite pleased with that you know it's beyond top quality work, Takes real skill to make it look so effortless 👍

@recolaq 11 ай бұрын

Wow, great work , learning a lot from it. One point of criticism which i didn't want to mention because of the good concept of this channel. The editor should focus on the sound levels . Actually it's one of most important tasks when editing video.

@garytaylor2238 Жыл бұрын

In a nutshell. It's been beautiful to watch 2 honest car mechanics grow something very informative and totally watchable into something special.. Big up to you guys. And thank you for great content. Haven't missed an episode. Ķeep up the good honest hard work..

@cwwiss1 Жыл бұрын

Always a pleasure to watch a couple of dedicated professionals make the right calls regardless of cost or time . I've come out of retirement and into my 3rd week restoring a fire damaged Evoque because of your channel guys. You are an inspiration 💓

@silverback7170 Жыл бұрын

You guys just keep proving the fact, that with your professionalism and pride in your work, anyone can buy a vehicle from you with the utmost confidence! 👏👏👏👌

@a11csc Жыл бұрын

chris get the goggles on,you are only given 1 set of eyes,great progress on the volvo

@commander_lard Жыл бұрын

turning into a volvo specialist :) - lovely to see the detailed repair of that panel!

@dennismoir1150 Жыл бұрын

You pair need a tv so this is better then any car show I've seen

@philtucker1224 11 ай бұрын

This video ended really well, I felt the enthusiasm and pleasure in Chris’s voice this video a little bit like Rob often has. That really struck me this time. Excellent stuff boys, nicely done.

@tomfinch4130 11 ай бұрын

Im glad you remembered the bypass cock up 😂 . I know chris knows his onions but tell him to slip a pair of glasses on when drilling.

@colinmoss7343 11 ай бұрын

And chiselling !

@alextripp1230 Жыл бұрын

Hi Rob and Chris, coming together nicely, great guy who bought the bumper from Birmingham for you. The water pump… nice one, what a saving there, just proves how valuable a couple of minutes cross matching numbers can be. Very intrigued as to what you have on your trailer (sounds heavily damaged).. Alex.

@chrish247 Жыл бұрын

You guys make a cracking team ❤

@linedancer111 11 ай бұрын

Naughty boy Chris, should be wearing glasses when drilling those welds out!

@stephenwestley1017 11 ай бұрын

Someone is going to get a dam good car at a decent cost with a repair that imo is better than insurance would do

@stevenjones19-m8i 11 ай бұрын

Hello Rob and Chris, great work on the Volvo,that part from eBay was a steal,£400 new is alot of money, Chris did a top job on the welded part.

@RS.8184 Жыл бұрын

Having seen salvage cars being rebuilt as a kid and throughout my adult life I feel right at home watching you guys work on your projects. When you finally get working on a salvage car most times than not something new always pops up that needs fixing, part of the game and to be expected in a way.

@trevorjarvis3021 11 ай бұрын

Lovely explanation by Chris on drilling out the spot welds, I knew they were special (expensive) drills, but never realised they are intact a flat cutter. (Personally I would have thought safety glasses should have been worn but only an observation) Very interesting and informative video. 👏👍

@Dalbayob69 Жыл бұрын

I’ve owned Volvo’s for past 20 years and can officially say that their dealer parts prices are ridiculous. INA makes pulleys and bearings for them. I use Gates belts and any suspension parts are made by Lemförder. Less than 1/2 the price if you don’t pay for the fancy blue box that says Volvo on it.

@AndrewSandilands-tk6st 11 ай бұрын

I’ve said it before, but it’s so nice to see such honest repairers…too many monkeys letting the side down. I make a point of avoiding crash damaged vehicles, but I’d have no issues buying one from you pair.

@MRPK1967 11 ай бұрын

Nice hat Chris. Worthy of a screen shot is that.

@kyleop1 Жыл бұрын

Watching Chris working is incredibly therapeutic. Another great video guys, thanks again for the effort!

@itsmephil2255 Жыл бұрын

I suspect that after Chris, working on that front section....it's better now than when it left the assembly line Well done Chris 👏

@basilterrier Жыл бұрын

Thanks for your guidance Chris. Although most people are not likely to get into the depths that you and Rob do, it encourages best practice when carrying out other less involved jobs. Keep up the good work.

@brandanhopper474 Жыл бұрын

Good video! Lads, when are we going back to mon&wed&fri? I’m struggling with this wed&sat it’s just not enough😢

@connormaishman8278 11 ай бұрын

Love the video shipmates x sound quality was up and down like a jockeys arsenal on a racehorse

@SportFury1966 11 ай бұрын

Chris looks great in a lieutenant's hat. The difference in volume levels between the real time bits and the voice-overs really need matching-up.

@davidjonathan1458 11 ай бұрын

i love when Chris is talking, he used be so quiet. Love the video

@TheDaf95xf 11 ай бұрын

Hi 👋🏻 guys. Yet again Chris has worked his magic with that chassis repair 😊 And love his new hat lol 😆 This I’ll be an awesome motor for somebody 👍🏻

@Timrsnakess Жыл бұрын

Well have to love when you stumble upon a deal like that water pump, lovely job this one is guys Cheers!

@johnharris-bv8ym 11 ай бұрын

I don’t think any of your videos will ever be able to show how relentless drilling spot welds is…. Fair play Chris..

@stuartlatham9814 Жыл бұрын

Chris looks like one of Thunderbirds! 🖖

@markkerry5840 11 ай бұрын

John is correct, volumes vary between school choir and Led Zeppelin !

@antonymorris7044 Жыл бұрын

There's always something hiding when you start delving in.least you got the master of body work Chris,great video guys.

@robertallardice8119 Жыл бұрын

The belt that Volvo supply must be made of gold!

@grahamsumner2984 11 ай бұрын

Safety specs ,when drilling and chiselling , not worth risking it !

@markoleary8810 Жыл бұрын

I'm not a volvo fan but loving both your hard work on this car it will be a beautiful when finished

@jimmcculloch3786 Жыл бұрын

Love Chri's hints and tips :)

@ridgmont61 Жыл бұрын

An understatement from Chris of perfection “quite pleased with that really”…..

@leonb2637 Жыл бұрын

Chris knows the importance of very correctly repairing and replacing certain parts with structural damage on any car as assures if the vehicle is ever in a future crash, it will properly absorb the crash and keep the occupants safe. Yes, it is more work, and a few quid more, but you guys have to do it right for your own peace of mind. There are far too many out there that wouldn't just to save a few quid and not care about the risk to the customer.

@alb1573 11 ай бұрын

It certainly is high level repair work Chris is carrying out - impressed!

@martinthompson54 11 ай бұрын

Hi rob and Chris, great job on the wee volvo, can't wait till the next video, from marty in Belfast northern Ireland God bless

@johnhooton8299 Жыл бұрын

Nice to see an expert at work, at least we got to see live how much work goes into it and the skills that are needed to remove a panel👍👍

@jeffshaw4553 11 ай бұрын

Can’t believe cost of parts for the Volvo you had right result paying £50 for the new part love the hat Chris 👍🏽👍🏽😂😂well done guys all coming together now and on its way to being completed excited for what ever is on the back of truck as you paid high price for it 👍🏽👍🏽

@trainmanbob 11 ай бұрын

Great video as always guys. However a rare criticism...Chris...no eye protection!!! What is on the truck is intriguing. At £10k bids it has to be something a bit special. The engine is not in the car, it sounds badly damaged. It is either a top of the range late model car or could it be a bit of exotica???? Can hardly wait. Volvo parts are expensive. I used to get all my bits from Eurospares who always seemed to have Volvo parts at good prices. Have a good weekend guys. Cheers, Bob

@martin4365 11 ай бұрын

Thanks for the film. Especially enjoyed the part where Chris is drilling out the welds and removing the damaged piece. Looking forward to seeing the next installment

@sarran1955 Жыл бұрын

Hi Guys At about 16:50 it is nice to see the ESAB welder working on a Volvo... keep it Swedish!! Cordialement,

@nickluckleek2445 11 ай бұрын

I keep writing probably the same comment Chris is a master car man excellent would love him to work on my car but will not forget to mention Rob a perfect partner ship keep up the good work and the channel love it

@barrykenward9178 Жыл бұрын

Yve both said before about the salvage game, you win some, you lose some, you lost one the cassis damage but won on the pump price, as ever great explanation from Chris on the spot welding 👍

@damianfuller74 Жыл бұрын

Chris you are becoming an educational superstar. Was that classic car weekly you used for masking that frame area?? So spot weld drills you use high speed yes. I thought slowly drilling on metal was the winner? Cheers boys.

@scotty6346 Жыл бұрын

It's great that you guy's have invested heavily in decent equipment like a jig etc to measure up and repair vehicles correctly, Also Chris' panel beating skills help a lot! There's a lot of KZfaq channels now with guys buying heavily damaged vehicles and just beating them out by eye and a lump hammer!

@stevo4649 11 ай бұрын

thankyou gentlemen,,great content, and what a nice gesture the fella dropping off the bumper,,👏👍

@andredowse394 11 ай бұрын

great job Rob & Chris, loving the party hat Chris at the end.

@steve83803 11 ай бұрын

Once had a front UCA go on my Lexus LS400, Lexus wanted £517.00 but like you guys found the same QEM one on eBay brand new for £115.00, couldn’t have hit that “Buy it now” button any quicker 😀 Great video again.

@danielsellers8538 Жыл бұрын

Liked, Chris hat on his head whilst, skilfully carrying out repairs excellent video and team work 😊

@stevegill8471 Жыл бұрын

I thought I was watching the thunderbirds at 19:29 in this video! 🤣

@anthonyobersteller2947 11 ай бұрын

Rob and Chris really liked this video Chris shows us he is the master of repairs and you the master of replacement parts can’t wait to see what’s on the back of your truck.😊

@georgedaville4662 11 ай бұрын

Another master class of how to repair cars properly. Handy tips from Chris all the way. Volvos are built to last, but as you say the parts are very expensive. This will be a fantastic motor for someone safe in the knowledge it has been repaired right👍😎

@arielsaeth Жыл бұрын

@ 19.00 onwards he looks like a extra from "Thunderbirds"

@davidholder5471 11 ай бұрын

Please wear some glasses or goggles Chris, that spot weld removal looked like the start of an episode of casualty 😂😂

@stephencatterson9320 Жыл бұрын

Two great genuine men

@spainter1985 11 ай бұрын

18:44 Nice hat Chris! "Just like that" as Tommy Cooper would say 😅

@robinradford8581 Жыл бұрын

Like the comments about Thunderbirds Chris....... he's not Virgil but Brains and Rob's character is a womble cos he's always foraging!!!!!

@geion54 11 ай бұрын

it's always a pleasure to watch Chris work,the chap's a brilliant fabricator.

@tonywood260 11 ай бұрын

18:45 Love the party hat Chris. 🥳🥳🥳🥳

@AndyK.1 Жыл бұрын

13:30 Landrover bottle jack. Always useful to have in the workshop. And block of wood.

@tomjohntig Жыл бұрын

Is it Chris’s birthday again love the party hat 😅😅 always a pleasure to watch Chris at work and Rob treasure hunting for parts and bargains a great team that gets the work done. Thanks Rob and Chris Tom

@ABPhotography1 11 ай бұрын

Rob's catchphrase is "It is what it is..." Salvage Rebuilds UK,

@andrewchild1592 Жыл бұрын

With that hat, he could sell burgers out of your truck 🤣🤣🤣

@barryaitchison5565 11 ай бұрын

to see chris working his magic is always amazing great work

@paulriggers1558 11 ай бұрын

if a bloke is prepared to drink/drive, then flee from the coppers, being economical with the truth is probably second nature... worried about the oil leak from the g/box, or is it a loose cooler hose excellent vid chaps, as always

@Grant.G.Simpson 11 ай бұрын

@grimehubtv7708 it was the old boy they bought it off 'son-in-law' that did the drink driving/chase/crash, the owner had nothing to do with that part, he is just the poor soul left to pick up the pieces

@BrasherFox 11 ай бұрын

Volvo OEM parts have always been very expensive. Back in the late 70s, I had a 245 Estate and changed the plug leads for OEM from the local dealer. They cost me around £20+ at the time and that was expensive at that time.

@michaelhynds8035 Жыл бұрын

Fantastic work as always gentlemen. Thank you.

@mandymoo7406 Жыл бұрын

I think your mad not to wear safety glasses whilst drilling out the spot welds,it's no fun when it goes in your eye and goes rusty and you need to go to a and e for the big magnet

@jamesbrett6518 11 ай бұрын

Or fluorescein eye drops, a blue slit lamp and the end of a hypodermic needle to pick the rusty fragment from the surface of your cornea. People describe the feeling of having a brick in your eye, even after removal as the corneal abrasion takes time to heal. So wear eye protection, people!

@islandhopperstuart 11 ай бұрын

That Poly-Vee belt from Volvo is crazy money guys. Instead I'd recommend that you check out the Gates catalogue which, I'm pretty certain, would give you the specification e.g. 4PKxxxx or 5PKyyy etc. Thereafter a tenner should be all you need to spend.

@stephenricketts7764 11 ай бұрын

You have done well with the new water pump Rob a stroke of luck there! Shame about the hidden chassis damage but as usual Chris stepped up to the mark. It may be that the body shop just didn't fancy doing the extra work but we will never know. This job is taking a bit longer than you first thought but as you said with the tyres, ' if a job's worth doing it is worth doing right'. I wouldn't expect anything less from you Two. Thanks for another great video and have a good weekend Rob and Chris. 👍👍

@ianoliver2131 Жыл бұрын

Great video, any safety glasses 😎😳😬

@rayclark44 11 ай бұрын

Great skillful work from you both again & a nice hat but the sound quality on your video could definitely do with a little adjustment guy's. Take care & stay safe

@nickmitton7350 11 ай бұрын

Never long enough for 2 videos a week. !! Can't wait for the next one boys. 😎👍

@martin54123 11 ай бұрын

I just love your work ethos of do it properly and thoroughly it's so honest!👍👍👍

@Lousteer2349 11 ай бұрын

My favourite KZfaq channel 🎉

@enrobsorussell Жыл бұрын

Refreshing to see Chris, not only working his magic, but without the obligatory tick-box PPE ie No Hi-viz, no ear mufflers, no plastic safety specs.....no mask, no bash hat, maybe knee-pads, elbow pads...have I missed anything out? Lol.

@Scotty-UK 11 ай бұрын

Been in the trade 40 years and always say buyers are liars and treat none as your friends, always double check, the amount of times I’ve heard “it’s fine mate runs great” could write a book 😂😂