Rebuilding an Old Tekin Redline G3 17.5T Brushless Motor

  Рет қаралды 724

WutUp Clegg

WutUp Clegg

7 ай бұрын

I rebuild an old brushless motor, then run it through the tests to see if it is worth the $60 it cost to rebuild it.

Пікірлер: 14
@jamesmooney7538
@jamesmooney7538 7 ай бұрын
Good job
@wutupclegg6618
@wutupclegg6618 7 ай бұрын
Thank you.
@lawton70
@lawton70 7 ай бұрын
1500 to 1590 is a lot of difference in a rotor. Still not super high torque but better for sure.
@wutupclegg6618
@wutupclegg6618 7 ай бұрын
For sure! I've tested motor with a difference of 20 gauss, and it was a huge difference.
@braxbarrett4398
@braxbarrett4398 6 ай бұрын
Whats the best 17.5 for short high grip carpet track i have a b6.4 i feel more tq and brakes would help alot. Track changes but typically a few 180 turns. Motor in the buggy now is a motiv mc3 its not horrible got it from a friend cheap but i know theres more time to knock off . I know its only a 17.5 but these motors have came such a long way i have an original fixed timing fixed sensor cable novak 17.5 omg what a dog i wish theyed left the motors fixed timing and equal but it is what it is im just looking for suggestions. You mentioned in video surpass hobby? Is there a specific model?
@wutupclegg6618
@wutupclegg6618 6 ай бұрын
Asking what the best motor out is a good way is to start a keyboard war. LOL... There are a lot of personal opinions out there. From what I have tested so far, which you can see the latest tests in my Tekin Gen4-R2 Elite video, my personal opinion would be the Tekin and the Surpass V6. They show the highest torque. On the track, I am seeing the Surpass V6 Stock Spec pulling the hardest. I recently tuned a Surpass V6 17.5 motor that had an average stator strength of 171. That is by far the strongest rotor I have seen. If you are interested in a tuned motor, shoot me PM. You can find my email in the channel info section.
@teamcrc1
@teamcrc1 7 ай бұрын
Way too many variables in the testing, the most accurate way to test a motor is on the track comparing lap times.
@wutupclegg6618
@wutupclegg6618 7 ай бұрын
Absolutely correct! I just replied with the same statement with another video's comment.
@MX-CO
@MX-CO 2 ай бұрын
Do you think the surpass V6 lite is a good motor?
@wutupclegg6618
@wutupclegg6618 2 ай бұрын
I believe it is a great motor. I'd be confident using it up against any other motor out there.
@MX-CO
@MX-CO 2 ай бұрын
@@wutupclegg6618 Thanks I bought one new, it was also Timed and shimmed by surpass, I haven't tried it yet. I'm currently running a reedy 17.5 and it's very fast also.
@wutupclegg6618
@wutupclegg6618 12 күн бұрын
What is the timing set at?
@MX-CO
@MX-CO 11 күн бұрын
@@wutupclegg6618 52
@wutupclegg6618
@wutupclegg6618 4 күн бұрын
How do you like the motor?
Tekin G4 R2 Elite 17.5T Brushless Motor Test and Review
49:03
WutUp Clegg
Рет қаралды 2,6 М.
Best Toilet Gadgets and #Hacks you must try!!💩💩
00:49
Poly Holy Yow
Рет қаралды 23 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 33 МЛН
MISS CIRCLE STUDENTS BULLY ME!
00:12
Andreas Eskander
Рет қаралды 21 МЛН
Tuning a Trinity Slot Machine 17.5T Motor.  Is it Worth Upgrading?
18:51
This Car Travels Farther Than You Push It
13:42
Tom Stanton
Рет қаралды 3 МЛН
it can 3D-Print onto itself?!
9:32
SunShine
Рет қаралды 1,2 МЛН
Can I use an ESC with a bigger amp rating with my motor?
6:18
Painless360
Рет қаралды 34 М.
Hobbywing Fusion Pro 2300kv | Recommended Crawler Settings
9:12
BigSung Hobbies
Рет қаралды 27 М.
SCX24 Power Bump! Spektrum 1/24 Sensored Brushless Crawler System
8:01
Brushed vs. Brushless motors - Top 8 reasons why brushless
11:10
Best Toilet Gadgets and #Hacks you must try!!💩💩
00:49
Poly Holy Yow
Рет қаралды 23 МЛН