Super clear, Joe. Thanks so much for this great video.

WOW!!!!! I wish I found this video 6 years ago. I just set up mic Vocal Mic and Guitar Mic this way, and the Isolation between the two that I've been trying to achieve is FINALLY THERE!!!!

Brilliant Joe! Thank You

What a musician.. love it

the final mix was nicely put together. Awesome performance from the artist too.

Thanks Joe! Nicely done and presented. Great mix at the end. Nice to know you can't stop all the "bleed".

Great practical advice. Love the crisp video!

BEAUTIFUL!!!!

Thanks a lot! This is just excellent tutorial with great examples.

Great tutorial! Have a session coming up with a guitar/singer......this really helped.

Really really nice end result Joe!!! And thank you for the recording tips. Im really impressed with how little guitarbleed actually went to the vocal mic.

Thanx Joe, very helpful👍

Thanks for this, I am going to mic this way for my home recordings!

That was great. Thank you.

Thanks Joe

Very nice! From both ends. Performance and the mix was beautiful!!

Really interesting mic technique to try out. Thanks!

Great video man, thanks

Lovly advise...great 👍

Sounds great man 🎙🎙🎙🎶🎵🎼

Thank you💯💯💯🇵🇭

Great job, thanks for sharing. God bless you.

Nice one Joe

Cool

Good video! Thank you. I noticed when you soloed the 2 tracks, the Mini K47 section there were no vocals being sung on that section, so can’t really hear the mic rejection of the vocal. The vocal mic demonstrated its rejection.

Hi Joe, thank you so much for your video! It really helps. If I may ask, what kind of reverb did you use at 14:25 ? Also, where I can listen to this amazing song ? Couldn’t find it on Spotify. Thanks a lot!

That song at 1:15 oooomg , what a voice !!

Joe, that sounded really good!

nice song...

I love when videos dont get straight to the point lol

12:18 lol. Like always, thank you, Joe.

would you recommend using two different mics? One for vocals, one for guitar even if they are different brands?

Great input- thx for your knowledge. I've been trying to record with my TC Helicon Voice Live Acoustic box & my Tascam 2x2 interface. Unfortunately, I don't think its going to be possible because the way the TC Helicon works is it uses a pitch correction software that requires the voice and guitar to come through the pedal, I dont think I can use the guitar line in with a condenser mic. Of course I've been using just the Line In jack thru the pedal to my interface, but definitely not quality guitar pick up using my aftermarket internal pickup... Perhaps I'll try doing them seperate, or use a SM57 for vocals and see if I can use a condenser for the guitar pick up. Honestly, I feel the TC pedal is kinda shitty and not worth the $300 I paid, but don't know enough about audio mixing to play around without it. Thx for the vid!

Did you use the figure 8 pickup pattern? Or are both mics cardioid? If it's the latter, I'm impressed by the amount of separation!

Hey, great video. Would this also work with a Small diaphragm condenser microphone on the guitar and a dynamic microphone for vocals? Or will there be too much bleed on the recording of the acoustic guitar? Thanks a lot for your response in advance!

Great reverb/delay for that song and performance!

Would you share the interface and software that you use? Thank you for the critical information. Stephen

Great production again Joe, I bought myself a sontronics Stc 3x, have you ever used them in your recordings. I only wish I saw this clip before, I bought my studio mic, but hey ho. Cheers Gerry

Thanks! I just donated free studio time for hurricane Harvey benefit and the singer songwriters are coming in next month. My goal is to make them an awesome demo! I have a TLM 103 and a pair of CS1000 I've had pretty good results from. One of them will be playing fiddle! I always do a line in recording just for back up along with the live recording. Sometimes if the line and recording is Deason I might blend a little bit of it in with the live to do up a little painting and stuff.

Can you talk about the idea of your reverb on the vocals? Thanks

🤠

This was great! Thanks Joe. What is your personal opinion on this mic setup (with two Roswells) as compared to using the two pencil microphones in XY configuration for capturing the guitar? BTW, thanks as always for all you do. Learning tons over here.

I should get me one of those... The artist not the mic.

Awesome! Nice Djembe table BTW. ;)

do you have video how to mixing this song ?

Can you tune the vocals after? or will there be too much guitar bleed??

NICE!!! Love Casella so much! I have been wanting to do this exact thing to make an acoustic EP. How do you go about mixing/blending the parts? I may be over thinking it but it is volume fades and everything in the middle?

I just want to record my [guitar+singing+video+mixing] No extra beats or anything. Please help me. Thank you.

that's a great technique and I'll probably try that out but i feel like it ends up being pretty studio sounding instead of live. I would suggest, although who am I to do so?, putting a third mic just behind those to capture one shot and listen back to see if it's usable. That way with one mic you get the sense of being in the room and where you are in relation. With two mics that all disappears and seems like it may have been recorded separately anyways. Just my thoughts. Hilarious ending.

Thanks for the awesome video! You did a great job positioning the mics to minimize bleed. And I appreciate the info about phasing! For those looking for video shortcuts, here's the mic setup: kzfaq.info/get/bejne/euB3g7p3t7jJl2w.html and here's the recording of how much bleed you get from each mic: kzfaq.info/get/bejne/euB3g7p3t7jJl2w.html

Hi Joe, I was wondering whats your opinion on the Rode NT1-A vs the Mini K47? Seeing that there's only a $70 difference between the two. I own the Rode and love it. Hopefully SweetWater will start carrying the Roswell Mic line soon.

Thank you very much for this video! Just a short newbie question, why did you use a condenser microphone for vocals and not dynamic microphone?

So I’ve tried this and the guitar mic has really good isolation - I can barely hear the vocals in that track at all when I solo the track. With the vocal mic I’m having trouble keeping the guitar sound out. Any tips? (I’m using two Rode NT1-As, the vocal one is upside down like you suggest and the guitar one is pointing down a bit, so the two mics are about 90 degrees off-axis relative to each other).

Wouldn't it be better to use a SHURE SM7B for the vocals?

We can’t get a sense of the isolation in the guitar mic if there aren’t any vocals happening at the same time. You should’ve picked a section with vocals in it.

what is the name of the song ? )

Fuck I’ve been reading your name as “Joe Glider” for years 🤦🏻‍♂️