Apex pH And Salinity Probe Calibration

Рет қаралды 26,487

6 жыл бұрын

/ reefergil
This video we will go over how to calibrate pH probe and how to calibrate salinity probe for the Neptune Systems Apex. With the use of Apex Fusion, calibrating your pH and Salinity is made very easy. Monitoring your pH and salinity is just one of many things the Neptune Systems Apex can do. This video, I'm demonstrating the probe calibration with an Apex 2016. Enjoy.

Пікірлер: 65

@mariodarosa3979 5 жыл бұрын

After watching your presentation I follow your recommendations , worked as you indicated. I am very appreciative of people like you, unselfish and eloquent, Mario.

@ReeferGil 5 жыл бұрын

Mario, you made my day! Thank you!

@robertrayworth8615 4 жыл бұрын

This was so useful I have been chasing 8.3ph for ages. I constantly get around 7.2 to 7.3 once I calibrated the 7 changed to 8. Now getting an average of 8.2. I also calibrated the salinity which was way off. This guide did the trick step by step instructions I could follow. Your rock 🤘🏻

@ReeferGil 4 жыл бұрын

So glad it helped. Thanks for taking the second to post you comment!

@robertrayworth8615 3 жыл бұрын

@cody colina No never found that to be the case at all.

@Reefkpr1 6 жыл бұрын

Bookmarking this video for future reference when I need to calibrate. Way easier to follow then any other Calibration video out there. Nice work Gil

@ReeferGil 6 жыл бұрын

Ha, thanks Phil. Really appreciated that comment.

@TimHarris-photog 6 жыл бұрын

Thanks for this!!! I've almost given up on my APEX probes being right. The pH and Salinity were just frustrating. I think you identified a couple of the mistakes I might have made during the process so I'll try this again. Greatly appreciated!!!

@ReeferGil 6 жыл бұрын

Hey Tim, I really hope you'll be able to fix the issue. Thank you very much for the post!

@dannybolton6039 5 жыл бұрын

Tim Harris ij

@breeforever3330 6 жыл бұрын

Companies should use you to make videos for them. This step by step video is better than the other out there, including Neptune's own how to video on this topic.

@ReeferGil 6 жыл бұрын

Bree, huge compliment. Thank you!!!

@DwightMcCharles 6 жыл бұрын

Good timing I need to recalibrate my PH probe. Thanks for the video👍

@ReeferGil 6 жыл бұрын

Right on Ktown!

@ReefingwithO 6 жыл бұрын

Good info Gil. I'm going to try and calibrate my salinity probe again. For the last 9 months its been reading 1. This video was also a great reminder that I haven't calibrated my PH probe since I got the apex which is over 14 months agp.

@ReeferGil 6 жыл бұрын

Hey O!!! Thanks man. Been missing your Thursday livestreams, I need to get home sooner and catch them.

@52artigas 5 жыл бұрын

As always, excellent presentation, easy to understand, Thank you

@ReeferGil 5 жыл бұрын

Thank you very much!

@SCReefer 6 жыл бұрын

Great update! When I get me Apex one day I will have to circle back to this video.

@ReeferGil 6 жыл бұрын

I'm really enjoying it. Thanks SC!

@Davelembo 6 жыл бұрын

Good info Gil. This will help a bunch of reefers

@ReeferGil 6 жыл бұрын

Right on Dave, thanks buddy!

@katehalle407 6 жыл бұрын

Awesome! Thanks reefergil!

@ReeferGil 6 жыл бұрын

Counting down the hours!

@solarflare8806 Жыл бұрын

thank you!

@matyas4878 6 жыл бұрын

very informative! Thanks

@ReeferGil 6 жыл бұрын

No sir, thank you!!! 👍

@carlosreefer7937 6 жыл бұрын

Awesome walk threw man but my apex system just keeps counting up its at negative 680

@will24s1 4 жыл бұрын

Great video

@ReeferGil 4 жыл бұрын

Thank you WIll!

@jeffjarry4257 5 жыл бұрын

Great detail thanks

@ReeferGil 5 жыл бұрын

Thank you

@ThaBiznessReefTank 6 жыл бұрын

Good walk thru!

@ReeferGil 6 жыл бұрын

What's up BIZZZZZ! Thank you very much sir!

@chrisstuff4669 Жыл бұрын

Don't forget for BOTH pH and SALT calibration to FIRST make sure that the Configuration under ADVANCED tab has TC (Temperature Control) accounted for if you ALSO HAVE A TEMPERATURE PROBE.

@sheemkhaa9933 6 жыл бұрын

Well done Mr reefer well done 👍,happy mothers day to the wife bro

@ReeferGil 6 жыл бұрын

Thanks Sheem, right back at you!

@jenniferdavis574 3 жыл бұрын

Where do you get your solution packets for PH and salinity ? TIA. Great video too !!

@jeffjarry4257 5 жыл бұрын

Now I have to learn to program my Skimmer ....pump ...etc... Because I just gotten my apex today

@mynameisnotcory 6 жыл бұрын

Can’t wait to get my apex system...hopefully a few more weeks!

@ReeferGil 6 жыл бұрын

You're going to love it Cory. Congrats!

@alancunningham5120 6 жыл бұрын

would love an apex controller, maybe one day. sundays would not be the same without some reefer gil videos :D

@ReeferGil 6 жыл бұрын

Ah shucks Alan. Thank you very much!

@hdjksksnsjehdhdhhd5253 6 жыл бұрын

I liked your video

@ReeferGil 6 жыл бұрын

Thanks Cienna.

@BriansAquariums 6 жыл бұрын

Every time I do my salinity probe calibration it is spot on for a day or two. Then over the next week it becomes uncalibrated. Anywhere in the range of 24- 40. I've done it at least 5 different time and with 3 different probes. Used different brands of calibration fluid. In 4 separate tanks. I do t understand it. Have you ever experienced this? Right now its reading 31.2 which I know is incorrect. I have 2 refractometers and they both read 1.026

@ReeferGil 6 жыл бұрын

Hey Brian. Fortunately, I haven't had any issues. It's reading 35.5 in the main DT. I also have a salinity probe in the nano tank and that one is reading 35.1. I just compared it to my refractometer and both systems were reading correctly. I would contact Neptune System's support to see if they can help you. Excellent customer service from my experience.

@hediki 6 жыл бұрын

I like that rodi trick

@ReeferGil 6 жыл бұрын

It comes in handy, thanks TMG!

@zacharywalters244 3 жыл бұрын

What if after calibrating twice but it shows 7.16 on my fusion dashboard when placed inside the 7.00 PH reference solution...Temp is 77.9

@ReeferGil 3 жыл бұрын

That's not way off to the point I'd be concerned. But in reality, it should be a little closer to 7.00

@dr.vinnyboombatz22 4 жыл бұрын

Thank you & great video! My only problem is with my Salinity Probe. I can't get the green check for the "Acceptable Range." The probe is straight out of the box and bone dry. Yet it still says to "Dry the Conductivity Probe." Am I missing the brain cells necessary to get this to work? If I understand you correctly it shouldn't be put into the solution yet at this point. Please help! I'm no Chip so I have little love for technology.

@ReeferGil 4 жыл бұрын

Correct. Needs to be dry prior to placing in solution. I took a paper towel, wrapped the probe, and shook it.

@dr.vinnyboombatz22 4 жыл бұрын

@@ReeferGil I finally got it to work. But def. need to try recalibrating. Kept getting messages on my phone that it was high. Came home and tested it with my Refractometer and it was a perfect 1.026. Guess technology needs to be taken with a "Grain of Salt."

@cubanreefer1582 6 жыл бұрын

Hey Gil what is on your apex TEMPNA and is 26.1 great video, you teach me something again Thank you!

@ReeferGil 6 жыл бұрын

Thank Cuban. TEMPNA is the temperature for my Nano. I think it was unplugged when I did this video so it was reading 26.1.

@915Mang 6 жыл бұрын

Whats sup Gil! Do you still have the Reef Keeper, Im gonna have to refer to this when I finally get into apex, lol

@ReeferGil 6 жыл бұрын

Stop buying tanks, grills and corals for one week and you'd have saved up enough for the Apex, lol. Once you have it, you'll never run another system without it!