As my dad used to say, "No need to start a job, unless you're going to do it right." Your attention to detail is remarkable. Thanks Pete!

What a great way to start a morning - a new "Just a Few Acres Farm" video and coffee!

Your a natural educator . Wonderful to watch you make it right . I love your farm videos but this restoration is amazing . Thank you Pete for taking us along .God Bless

Pete it joys my heart to see a happy man , money isn’t everything ever time ,you r a very intelligent man living life at its fullest great example for us all . Really enjoying your vidios . Kingfish from Tenn .

Between you and your Pop, no restoration roadblock stands a chance! Dynamic Duo!

Pete, you continually amaze me at your knowledge and ability to restore tractors. Well done.

Pete - Kudos to your dad for his work to restore the shifting fork! Your dad has a lot to teach all of us.

Good afternoon, Pete. You amaze me by having all your parts in order- My father would be proud of me watching your restoration, Farmall 856, instead of the "crap" on TV

🥓🍳☕️ & watching Pete put the puzzle back together 😎

Patience, Patience, and more Patience. The best tool in your kit. 🇺🇸

Thank you Pete for another great video. A young man could learn so much from you if he would volunteer his time just to work with you. When I was young I would volunteer my time and help Older people and learn from them.They have a vast amount Knowledge.

first time commenter..i make my tractors look new and let a local mechanic do the nuts and bolts repairs.. to each his own level of ability.. you are very interesting to view.. thanks for another enjoyable video..at least you didn`t draw blood on this one..

Always a pleasure to watch you work. You do things precisely how I would if I had your skills. Every installment is outstanding -- among the best instructional videos on You Tube!

Glad to see you added some new tools to help save your back.

I was concerned about leaving the rubber band around the bearings, but that took care of itself. Now I am less anxious. About that.

Good morning Pete. Gonna be a great day !!!!!👍

Once again you have made winter so much more enjoyable spending time with your rebuilding. Although it’s just for a short period of time , it’s been interesting and fun . Your patience with and funny comments with difficult bolts , gears has taught me to be more patient with things on our small ranch . Thank you so much , you’re the best !

Really enjoy your great attitude and methodology to working in this 856. Thank for sharing this experience with us

A tractor is like a box of chocolates, you never know what your gonna have to do more of. Lol. Love your videos Pete!

Another great morning watching your "new" tractor heading towards the finish line.

Thanks Pete. This was very, very, interesting! I'm amazed at the engineering that went into designing this, at that time in in our history. To me it's remarkable!!

Your Father's ability to redo a part is so helpful and you know it is right. Amazing video Pete! Really enjoyed it. Thank you for sharing and all your efforts.😊

Nice work, Pete

Great work Pete

Good morning Pete great video I like the part where you had your father repair that part for your tractor. I’m going to work with my grandson when I do my Ford to end in the spring and I’m gonna be passing a lot of my knowledge I hope to him so not only is he going to get the tractor but he’ll get some of the knowledge I have and hope he help because hell, I’m 80 years old. I don’t know how much longer I’ll be around but I want him to learn as much she can while I’m still here. Thanks again.

Nice editing, Pete. Thanks for sharing. -EZ

Good morning. Really enjoying videos.

I am really enjoying this restoration series. I marvel at the intricacies of this tractor.

Good morning Pete!

Always a pleasure, Pete. I'll bet the old gent you bought it from would enjoy climbing aboard to see/feel the difference you're making to his ol' pride and joy.

It amazes me how the replacement parts for the old tractors are available. Could you share with us what some of these parts cost? It would be interesting. Thank you

Good day to all.

I have really enjoyed watching you rebuilding the tractor. I have never been a guy who enjoyed mechanic work, but admired folks like you who have the love and ability doing this rebuilds. Just this morning I took my brother to pick up his dump truck and met the mechanic who does his repairs. Miles is a heavy equipment Mechanic and I asked him what piece of he enjoyed working on the most. Miles said he enjoyed working on Caterpiller D10’S. I guess every mechanic has his favorite machine or brand of machine he likes to work on. Growing up on a dairy farm we had a International Farmall H and a Ford 8N, now you know how old I might be. I can’t wait to see you finish the rebuild and see the tractor running like a kitty full of cream. I love ever minute watching you work!

I like how Pete talks to the parts he's fitting together. It kind of makes sense to me.

Pete, I have to admit to a little "hero" worship. I wish I had the knowledge and talent that you have to do the things you do!

When you are finished, you will have a great tractor and your viewers will have the education and entertainment for long to come. Thanks. Have a great day!

I admire the way you work Pete. Great job explaining everything.

I really enjoy your rebuild videos

Great video again💪💪💪

I wish i had the ability to tear apart a tractor and put it back together without having parts left over 😂

Your theory on restorations is right inline with mine!!! You're so soothing to watch and listen to and the machinery is the right color!!

It's amazing the engineering on these old tractors. Done with sliderules not computers. Thanks Pete! Keep Smilin!!!!

Thanks Pete 🙂. Got to spend another enjoyable morning drinking coffee with you. 22 degrees here this morning. Good time spent inside.

I'm gonna pass out when you first operate this dream machine.

My anticipation is heighten, as we're getting closer to the final stages. i like the use of the rubber band to hold the pin bearings, such a useful tip. i can not wait to hear her purr. Pete this 856 is going to love you back in bunches.

Thanks and GOD BLESS 😀

Great video as always and good morning!

Can’t wait for the next one! Another GREAT job Pete

I did enjoy the video Pete. I'm subscribed to a couple hundred channels and yours is in the top 5 or 6 so THANK YOU Pete! May God bless you and your family. 👍

What l like about your tractor restorations is you get them working like new and then you work with them. No trailer queens on your farm. 👍

I'm still amazed that you remember what pieces go where when you put these back together. And then it all works!

Great job showing and explaining in enough detail for a DIY guy like me!

Hi Pete..Outstanding video again today...you give me a lot of satisfaction watching you putting your tractor back together....and your knowledge is impressive..thank you enjoy your week....

Morning Pete

Thanks Dads Machine Shop!

I really enjoy just how amazing you are at ease doing this stuff! You have my attention throughout these videos! Can’t wait till it all is new and shiny! Love the videos doing this and all the farm stuff! Have a great week!

It's so great you still have your dad.!!❤ Hope he's around for many more years.

It's always great watching you install new parts and how well it all fits together. Nice job Pete and thanks

We haven't seen your dad in ages. And how are the piggers doing?

@6:56.."the click of my internal torque wrench".... HAHAHA!! sounds like your internal Torque wrench could use some lubricant!!😂

Kid's clothes rags are always around the shop reminding you of ten years ago.

Thanks Pete. With your tutelage I believe I have finally mastered using a Ball-peen hammer. On what exactly is another discussion according to my wife.

Pete, You rock man. My wife and I enjoy you so much. It was great meeting you at the show last year.

I realize why I enjoy watching you work and put the parts back together; it’s your demeanor. You are calm, not frustrated because you really seem to want to know & find the solution to a problem. You would be a fantastic instructor! Thanks

Hello Pete I sure am enjoying this rebuild. Couldn’t help to notice where have the jokes gone with an occasional joke it would be a perfect video. Thank you and hello to Hilary and family from Phoenix

@13:48.... Too funny... I want to guard my eyes EVERY time ..( my husband was a welder)..

Pete, Awesome as always..... Aloha...................

Thanks Pete for the video!

Love the old tractors. Especially farmalls I love my cub

👍a load leveler is a great investment. Saves time and energy. The short chains with hooks are handy for other purposes also.

Great video on how to inspect parts and being thorough. Show that every little bit of slop adds up to big issues.

I have really enjoyed watching you fix up the tractor . I did not know there were different kinds of lock tight ! Of course I have been enjoying all of your videos ! Thank you for sharing !

your videos are amazing to watch always learning something new, keep up the good work, looking forward to more.

Great video, Pete. Making progress. 👍👍👍👍

Very informative video. Thanks !!!

What a great start well, almost a start. To my day. It actually started a 04:30, but you're close enough. Thanks Pete

I love your farm and mechanical videos. I have noticed how soothing your voice is. The best of both worlds. KEEP EM COMING!

Love watching... Please keep educating us with your work ethic.

Great video!

Impressive levels of specific information and knowledge my friend, love ur show, it's like a constant seminar for me and my machines, thank you bro

I'm still with you. Thanks for your humble, genuine and passionate approach to helping other learn. It is apparent that you are passionate about helping others with an endless intrinsic reward. Keep doing a great job. SW Ontario Canada

Tractors coming along real good what a great video😊😊😊

Good morning Pete so happy to see you using craftsman tools instead of the over priced snap on tools .

Enjoyed this video very much!

I am NEVER disappointed when I stop by here during your restoration projects.

Very nice job and no one rushing you!!

Looking great like the way you strive to be accurate and consistent with the original build

another great video

I like the idea of new gauges that look original, but there are lots of them out there that are cheap Chinese knock offs that don't always work well or for long.. That is where some tractor forums can be good help, by reading comments of people who have been down that road.

Another enjoyable video for me to watch, love these types with all the details and advice. Thanks Pete!

I’m Always excited to hear what you have to say about the farm. I hope to hear that the cows in the calfs coming soon with along with the pigs.

Thanks Pete great video.

I'm glad to see there's some people out there to steal. Want to do the job, right? Thank you, Pete

You can also use rubber bands for needle bearings for transfer cases as well if you or anyone you know is going to be working on one !

Great job Pete. Thanks for sharing the video.

I knew you weren't going to leave that rubber band. lol. Always good content!!

Hey Pete I appreciate every second of your videos thank you for everything you do!

Great job buddy thanks for sharing

Pete, I think you NOW have enough blue thread lock for the next YEAR1! That’s the biggest bottle I’ve ever seen… 😂😂😂

It sounds like your dad is an amazing fellow