You should "NEVER-EVER" open 80 & 443 to your NVR you are just asking for issue. Instead use port 8000 udp only, it's a service port for the app. WAY more secure. Also isolate it on a different vlan with a rule to not hop from one network to another.
@PE4DoersАй бұрын
Thanks Jason, I will look into it further.
@PE4DoersАй бұрын
Jason, as it turns out neither 80 nor 443 are ports that the REOLINK NVR will respond to. Most likely it was needed in an older version of the Firmware. I suspected that, but I should have tested before including them in the video. I have now disabled them on my router to be 100% secure. Thanks. I will Pin this comment and the responses in the comment area of the video.
@jesusquiroz1Ай бұрын
@@PE4Doersis it possible for you to do an update video? I’d like to know how to isolate it to a different vlan. Thank you.
@indyjones328713 күн бұрын
a setting to turn on use with app, under a tab called "info" great interface decision.... SMH. This is exactly what I needed! Thanks for the video.
@PE4Doers10 күн бұрын
You are very welcome. You may still want to disable that option unless you are planning to heavily use it remotely. There is 'always' additional security risk on your equipment when remote access is enabled.
@ronm6585Ай бұрын
Thanks David.
@PE4DoersАй бұрын
You are very welcome 🙂 Thank you for watching and the very nice comment.
@xrpgambler565Ай бұрын
Is there another way to enable the reolink app?client view the mobile about. I don’t have a computer screen.
@PE4DoersАй бұрын
Well, there is a Windows App you can run from your desktop computer that is available on the Reolink Website. The current version/file is "reolink_setup_8.16.8_0.exe". Once you have downloaded it, you will need to log into it using the Admin account you created at installation, then in the menu on the left pick the NVR gear (to the right of NVR), then Network, then Advanced. The second entry should be 'Enable UID', which you need to click turning it Blue with the dot to the right.
@jeffjeffjeff219 күн бұрын
I would suggest to ask a friend with a laptop if they don't mind downloading the client and you can enable it there and then delete the client from the laptop afterwards. I wish Reolink would just make the "Enable UID" button available on the smartphone app but it doesn't seem likely.