The BEST way to remove door hinge pin with a bottom cap.
Пікірлер: 147
@jbarron5702 жыл бұрын
Thank God there are people like you who take the time to make a video like this! It’s practically a public service!
@JJ-nc6qf4 жыл бұрын
Thank you for the great video. More importantly, thanks for making 2:30 and not a 10 minute video on a 2 minute job.
@alexanderlang49063 жыл бұрын
Thank you. Head scratcher for me. Didn’t even know this was a cap. Saved me a lot of hassle. Much appreciated.
@WeifengPan3 жыл бұрын
Thanks for the instruction! Saved my date! By the way, the bottom cap is a stupid design, just to make our lives more difficult.
@charlesstewart51653 жыл бұрын
Never cease to be amazed how many great people post useful pointers. Great little video Man! Thanks
@scout71983 жыл бұрын
Thank you Doc!! I have a hired "door carpenter" here that did not know how to remove this type of pin. Your video saved the day.
@joesinakandid5284 жыл бұрын
Hey Doc, one question keeps ringing around inside my empty head. --- For an interior area door (not high-security) - *Why would anyone want to replace the bottom plug?* Joe S
@margoh.94237 ай бұрын
Working on a last minute project for the hubby- this video saved the day!! I can't be more thankful!!
@AllenCross5 жыл бұрын
Very cool tip! Been looking for a reasonably elegant solution to this. The hinges on my door are at least 45 years old -- not 'screw-on' and the maker is no longer in business.
@BillMorganChannel5 жыл бұрын
Thank you for your service. My son said "Why go to college? everything you need to know is on KZfaq."
@lukesaysmoo3 жыл бұрын
That was so much easier than any of the ways I have seen! The hex wrench suggestion is very nice!
@labtrainer095 жыл бұрын
CAUTION! I just bought three nice National Hardware stainless-steel door hinges that only LOOK like the older "bottom cap" hinge in this video. In mine, however, the cap with the hole in it is swaged in place, preventing removal with vise grips (or almost anything else). Fortunately, when I looked inside that hole with my headlamp, I could see the end of the main hinge pin farther down inside the hinge. I simply inserted a 10D nail into the hole, set the "short" edge of the hinge across the miter-gauge channel in the top of my table saw, and tapped the head of the nail until the main hinge pin started to come out. I then finished removing it with a pair of pliers. (It came the rest of the way easily.) Hope this helps.
@wesleyeisenberg41806 жыл бұрын
Yep, this handyman is doing this today for a customer, now I'm an instant pro!! Thanks.
@morsl474 жыл бұрын
Just saw these with the cap for the first time yesterday. Had to leave a fridge sitting in the carport. Thank you very much.
@mariefire18244 жыл бұрын
You just made my day im restoring repairing a 1868 Yale And Towne antique steamer trunk and I want to make sure how to properly get her lid from hinges and the end caps off to spray paint today thank you so very much
@mydemon4 жыл бұрын
Amazing tip. Worked instantly on a very old and rusted hinge.
@giohenrik9071 Жыл бұрын
Awesome! A BIG thank you! I wasn't aware of the cap. My hinges even had a cap on top as well. Once removed it was easy.
@aidasanchez56543 жыл бұрын
Would this work on wheelchair ramp and if not how can I remove the hinges from a wheelchair ramp.. thank you
@p524574 жыл бұрын
Thank you so much. Building a home made deer stand and all the hinges I could find were this design. Looked on KZfaq and Bingo ! ( Put them in a vice before installing - instead of Vice Grips ) You're the Man, Doc.
@richardgreer4594 жыл бұрын
I live in an old house and the hinges had been painted over..multiple times. Luckily I was able to pull the hinge from the top using vice grips!
@malloryadams7143 жыл бұрын
THANK YOU!!!! This was literally the easiest things to do after I watched your video. Thank you so much!!!
@stanthorne68874 жыл бұрын
Thank you. I was wondering about the best way to get the bottom cap off. Worked great.
@planetag3104 жыл бұрын
I'm a woman with not much strength. Is there a way to do this without the vice grip? If not, how hard is the vice grip to lock down? You grunted when you locked it, so it seemed like you had to use a lot of strength to do so. Please advise, thanks.
@DonaBologna3 жыл бұрын
Can I use a hinge pin door stop with this type of hinge?
@clapforboobies58922 жыл бұрын
Is it ok to just leave off the bottom cap?
@mikeandersen54 жыл бұрын
You made it where my couch fit through the door way. May rainbows shine on your head
@smichelsen3 жыл бұрын
How about at the end of the process, I don't replace the cap? What is the point of the thing anyway? Thank you very much for this video, it saved me a lot of grief.
@t.g.77004 жыл бұрын
Thank you sir. I’ve never seen one of these hinges before and you made it so easy!
@HowTowithDoc4 жыл бұрын
Glad I could help!
@michaelromeo56894 жыл бұрын
Many thanks! That was driving me nuts. ( Why do people fix things that aren't broken?)
@invisiblerevolution4 жыл бұрын
BEST VIDEO.... Just finished watchin 3 others, didn't even mention the bottom pin.
@AKIYIAKELLY Жыл бұрын
So bomb. Thanks so much. I am going to try this.
@SoyCandleLoverMaker Жыл бұрын
Thanks for the assistance, Doc. Haven't run into these double cap door hinge pins yet. And would you believe only on my master bedroom door in my own house? Thanks again.
@Waingro8084 жыл бұрын
Thanks bro. Every video I watch assumes there's no stupid bottom cap.
@malcolm44585 жыл бұрын
27 people gave thumbs down?!!! WTH... This was a great tip.
@davegoar18932 жыл бұрын
Why remove the cap on the bottom. Most are center drilled. Use a pin punch from the bottom with the cap in place or with your method use the vice grips on the pin instead of the bottom cap.
@user-tk3qv7bv8v4 жыл бұрын
You got right down to the "stupid" (right word) problem. Thank you. Got 'er done.
@stevencorbo1220 Жыл бұрын
There was no reason for an interior door hinge to not just be able to be taken out with a screwdriver
@stephenlaurie69205 жыл бұрын
Is the cap on the bottom asthetics or does it serve a valid reason to exist?
@math28s2 жыл бұрын
Thanks, I felt very stupid not being able to remove the pin with my hammer and screwdriver, since there is no space for the screw driver
@timacree71775 жыл бұрын
much appreciated, thanks! old faded white door is now a beautiful deep red :)
@karynobey73634 жыл бұрын
You are awesome! I’m fixing my interior garage door and it has these hinges!!! Thank you!!!
@kathygenovy38932 жыл бұрын
Do you have to put the bottom cap back on
@MrPatrick20114 жыл бұрын
Thanks. Knocked out the job in 3 minutes
@JimLinsalata4 жыл бұрын
Thanks! Big help with removing my Gatehouse hinge pins.
@exbadger15 жыл бұрын
Well done. Was really puzzled by this until I saw your vid. Thanks.
@karensivils22414 жыл бұрын
Perfect, thanks! Simple and clear. :)
@MagnusMaximusMarcus Жыл бұрын
awesome video, I usually put painter tape or electrical tape on the bottom so you sent scratch it.
@wilyum6710 ай бұрын
Excellent advice! Thank you very much!!!
@seansean62 жыл бұрын
Thank you. This was very helpful. Much appreciated!
@Jonathan-pz3zb8 ай бұрын
To make it worse, mine had a TINY hex screw in the center of the hinge which makes it impossible to punch the hinge pin out. You have to remove the rice-sized screw in order to remove the pin… after you remove the cap at the bottom. SO STUPID!
@christopherscola67906 жыл бұрын
I never knew that and have been struggling with it. THANK YOU!
@nazb42215 жыл бұрын
Great tip, thanks!! I was struggling with it before I watched your video.
@johnsgalv3 жыл бұрын
Great piece of DIY information. Thanks Doc
@videkov74 жыл бұрын
Brilliant! Saved me some time. Subscribed. Look forward to checking out more of your videos! Thanks!
@LoveFamilyDollShow3 жыл бұрын
This really helped me to prepare to install my cabidor 👍👍👍👍👍
@hopkinsse4 жыл бұрын
Thank you! I have ONE door like this. The other doors don’t!! Wasn’t sure what to do
@sundialsoft5 жыл бұрын
great tip. Mine have a top and bottom cap and a hard steel pin in the middle which I could knock out
@jeanniebrown68384 жыл бұрын
That was awesome and extremely helpful!
@goosmann3 жыл бұрын
Stupid indeed! Especially when there are no instructions. Thanks a bunch. Saved me from scratching up my new hinges.
@jordansantos40295 жыл бұрын
Isn’t there a hole in the bottom cap? Looks like it. You usually pound the pin out by putting something through that hole in the cap. No need to remove it first.
@petergriffin15464 жыл бұрын
Can you show us the Baldwin floating hinges? thanks
@mykuljay3 жыл бұрын
Thank you so much!! Makes sense and it's a great and easy way. Stopped my frustration!!!
@azoutlaw73 жыл бұрын
Now where did I put my vise grips....
@rasitawinner82034 жыл бұрын
never heard them called hex wrench we call them "allen keys" in europe but thanks for info
@Richard-gw2lr4 жыл бұрын
I grew up calling them Allen wrenches. Or Allen keys. Even in America we call all kinds of things different names.
@markhardy67994 жыл бұрын
Thank you for your video, very helpful!
@phnigra1118 ай бұрын
Brilliant, minimalism is best.
@kcal3212 жыл бұрын
Very helpful. Thanks!
@Grace_oGD8 ай бұрын
WOW 🤯. Thank you sooooooo very much. Thank you.
@Aidan.173 жыл бұрын
Much appreciated although mine were rusted in solid haha so off to hardware store to get 4x hinges!
@koopadogmax13453 жыл бұрын
Thanks, dad!
@lisasun96235 жыл бұрын
if the cap on top pops up after a while do i just hammer it down?
@Russ_Case8 ай бұрын
Worked like a charm
@BoinLV4 жыл бұрын
Excellent tips; thanks!
@Blue-bf8lv2 жыл бұрын
quick and simple, thank you
@thefilipinapee3 жыл бұрын
Thanks for instruction video.
@michaeleldredge8525 жыл бұрын
great job , sounds so easy thanks again
@yimb84374 жыл бұрын
This worked brilliantly! Thank you!
@SiempreSeattle2 жыл бұрын
I like this. Off to try it now! 👍🏻
@markflierl16245 жыл бұрын
That's what I call them as well, "Stupid hinges"!
@CowboySanta4 жыл бұрын
Please tell me this isn't the security hinge I just spent 60 dollars on. The ones your not supposed to bevable to remove the pin from?
@ALegendEli4 жыл бұрын
Im having an issue with an older door that has the cap but it has extremely flat bottom caps and they were hammered in tight... been fighting the damn things for 2 days and have given up any tips?
@timhill54264 жыл бұрын
Any luck? I'm dealing with the same thing. I can't find any tips or tutorials to remove a cap that is flush that you can't grip with vise grips.
@luktish4 жыл бұрын
@@timhill5426 It might be non-removable riveted pin hinge...
@jeefberky21425 жыл бұрын
Worked like a charm.
@mre5073 жыл бұрын
Problem with my door is the caps are both round and don’t have ability to grip like yours do.
@ScrewballMcAdams4 жыл бұрын
Excellent. Thank you!
@tt-vraymk21403 жыл бұрын
You safed me Doc.
@camilamendezroca12605 жыл бұрын
Very helpful! Thank you so much!!!
@Airbender24B4 жыл бұрын
Is there anything wrong with unscrewing the hinges on the door to remove the door instead knocking out the hinge pins?
@mary-graylopez5703 жыл бұрын
this saved us thank you doc
@wadealexs79164 жыл бұрын
Thanks doc great stuff
@MrNgcovelli5 жыл бұрын
Brilliant Doc! thank you
@mjk82925 жыл бұрын
Thanks for sharing the info
@andy-jac5 жыл бұрын
Excellent idea.
@TCLeahy5 жыл бұрын
Thanks so much! I’ve got one set of hinges like this.
@carlosmolina6415 Жыл бұрын
Love it! Thank you
@gerryjimenez282 жыл бұрын
Thank u brother!
@rainingreptiles46216 жыл бұрын
Thanks - helped me big time quickly.
@dominicavant1160 Жыл бұрын
Huge thanks!
@jaydubb32462 жыл бұрын
Why does everyone feel the need to reinvent the wheel?? What on earth was wrong with a standard good ol hinge pin that you jus tap out, now we need a cap and an extra step to do something completely useless. Oh I know why how silly of me, it was to make a buck....