Remove Stuck Sway Bar Link With A Bottle Jack 💪 Without 🪚

Рет қаралды 1,185

8 ай бұрын

Remove any stuck seized stabilizer link or sway bar end link using a bottle jack or floor jack. No cutting necessary! This helps in hard to reach areas & where a breaker bar cant fit. Click SHOW MORE for tools used, & other helpful videos. Please LIKE 👍 & SUBSCRIBE 🔔. 👉👉👉
Please mention in the COMMENTS 💬💬💬 any other ideas or thoughts of different tools or methods to remove a stuck sway bar end link.
If you can't get a stabilizer bolt off after using penetrating oil with a breaker bar because it can't fit and you need leverage, or you just don't want to struggle and pull a muscle, then grab a Bottle Jack or a Floor Jack and let it do all the heavy lifting! 😊
Only tools 🧰 and supplies needed:
👉 Floor Jack amzn.to/3oLllOd
👉 Bottle Jack amzn.to/3eil2Wi
👉 Jack Stands amzn.to/3l1Npuk
👉 Breaker Bar amzn.to/3oQGTJx
👉 Ratchet Wrench amzn.to/2JiEG9d
👉 Wrench set amzn.to/3dUvQ0C
👉 Pliers amzn.to/35WmFVV
👉 Socket set amzn.to/2GkpNCl
👉 Hammer amzn.to/366wgK5
👉 Long pipe
👉 Penetrating oil amzn.to/325XWgJ
👉 Torch (Too much online buy in a hardware store instead)
👉 Blocks of wood
INSTRUCTIONS 📋:
Pump up the jack while the breaker bar or ratchet with socket is attached to the sway bar nut. You may hear a click sound as you start pumping up the jack. Usually only a few pumps is needed to crack loose the bolt loose. 😲
The pumping action is doing all the work and is breaking the rust or corrosion off the seized nut and the pressure is what allows the screw to turn again. 👍
By the way: using a jack can help in so many ways not just to lift up your vehicle, but to take stubborn screws off. Don't forget this!!!
Other helpful videos mentioned in this video to check out:
👉 Remove stuck bolt or nut with a FLOOR JACK: • Remove Stuck Wheel Fro...
👉 Remove Stuck Axle Nut: • Remove And Replace Stu...
👉 Remove Stuck Lug Nuts On Wheel With Extractor Or Torch : • Remove stuck lug nuts ...
More videos on the different ways to remove a sway bar link will be available later. Please 🔔 SUBSCRIBE 🔔 to be notified when those are available.
Also, If you want you can help support this channel and get me a cup of coffee ☕ here:
➡️ www.buymeacoffee.com/randomca...
OR
➡️ ko-fi.com/fixcaryourself
OR
➡️ Click the SUPER THANKS button above.
THANKS AND PLEASE 👍 👍 👍 AND 🔔 #FixCarYourself

Пікірлер: 6

@LewisAraujo 8 ай бұрын

Good trick!

@FixCarYourself 8 ай бұрын

Thanks! Hopefully more people think to use this when trying to get off other stuck bolts or nuts. It helps a lot especially in tight areas.

@chrisc.1668 8 ай бұрын

Buy an impact wrench

@FixCarYourself 8 ай бұрын

I would usually agree, and use that. Why work harder. Unfortunately sometimes you might not be able to use one, because of the tightness of the area your working on. In this case an Impact wrench doesn't work. This is why a bottle jack or floor jack like this really helps.

@chrisc.1668 8 ай бұрын

@@FixCarYourselfFair enough. FWIW I did think this would be a cool trick to use in a tight situation, as you said. 😊

@FixCarYourself 8 ай бұрын

Cool. An Impact Wrench is my favorite tool, and I use that the most for everything.