Removing a 42 in Deck From a John Deere X300

Рет қаралды 95,229

7 жыл бұрын

This quick guide shows how to remove the 42" mower deck from a John Deere X300 tractor. As far as I know, all of the other videos showing how to remove the X300 decks show the 48" variant, which is much different than the smaller decks.
It's super simple and can be done in a just a couple of minutes.
Putting the deck back isn't shown since it's literally just doing these steps in reverse.
SONG:
"Marauder" CC 3.0 by audionautix.com
audionautix.com
MORE PROJECTS AND POSTS:
granworks.com
SOCIAL MEDIA:
/ granworks

Пікірлер: 24

@johnburns8705 3 жыл бұрын

Bought a used JD X300 and have been trying to learn to service it. Very smart to show the workings of the deck first to more clearly understand the steps for removing the deck. Also thanks to Arnold for explaining (much more clearly than the manual) that the 3/8" ratchet was to be used without a socket attached.

@arnoldhoersten3730 7 жыл бұрын

The 3/8" ratchet (with no socket attached) fits perfectly in the 3/8" square hole located exactly where your linesman pliers grabbed the tension arm. Very handy since you can adjust the ratchet in either direction when removing the belt from the motor pulley.

@granworks 7 жыл бұрын

Yes, that's it! It's so obvious after you say that and I look back at what the tension arm looks like... but man, that simply never occurred to me until now. Thank you!

@suzannewells1304 3 жыл бұрын

best video yet, especially for a lady with no lawnmower skills

@FelixtheMetalcat 3 жыл бұрын

Thank you for doing this video, I simply needed some reassurance that it was as simple as I felt it was. Usually when things are that easy it means I missed something 😆

@Scott.Farkus 6 жыл бұрын

One of the easiest decks to remove I've ever seen. Love it.

@mattador6891 7 жыл бұрын

Thank you for this video. Definitely very helpful when I installed the new belt for the blades this weekend.

@had2galsinthebooth 7 жыл бұрын

My 42C JD deck has a lever to release tension on the belt,just pull it from the hook and move backward to loosen the belt for the blades,no tool required. There is another belt that goes from a deck pulley to the lower engine(PTO?)pulley that has to come off to remove the deck. Still very easy to do. If I don't need to move the machine I can just leave that front bar hanging underneath,no need to take it off as it just slips into the front hooks of the deck. 4 attache points,2 spring loaded pins without cotter keys and 2 hooks. Good video,thumbed up.

@randybatassa9890 7 жыл бұрын

Nice Video. Need to remove so I can get to the Drive Pulley's and Drive Belt above the deck. This is making my Friday day off look real good.

@kentshoemaker6785 4 жыл бұрын

Can you show how to put it back on?

@shadowandmike1215 7 жыл бұрын

Nice video! Going to go do this right now.

@losttherace8998 7 жыл бұрын

Thanks so much! I learn better by watching than reading!

@AbeW2000 7 жыл бұрын

Can you make another video about your theatre/media closet. I found it very interesting

@granworks 7 жыл бұрын

Thanks! Yes, I'll definitely be doing more videos in the future on my theater since there's a decent amount that still needs to be done. I have mostly just photos of the build process to date, though, and I'm not sure if anybody wants to see a theater build on KZfaq in essentially a slideshow format. I suppose I could post a few videos in that format and see what kind of reception they get.

@AbeW2000 7 жыл бұрын

granworks thanks for responding! Your videos are very entertaining, the content quality is outstanding. I found it very interesting PVC pipe to run the wires. Very cool!