Removing Pots From the Wheel

  Рет қаралды 45,118

Timsee clay

Timsee clay

6 жыл бұрын

We don't need pot lifters, a hundred bats, or lots of water. Just two hands and the proper set up.

Пікірлер: 40
@moragweatherhead1794
@moragweatherhead1794 6 жыл бұрын
That's the first time someone has shown me how to use the knife. Thanks Tim
@BobbyLyman
@BobbyLyman 6 жыл бұрын
Thank you so much for the demonstration on how to use the wooden knife. I've been screwing that part up for a while now! If possible, would love to see how you do it on a bowl. Thanks again!
@franka9161
@franka9161 2 жыл бұрын
Amazing ALL your videos very clear informative and not annoying 😂. Most of the KZfaq instructors try to be funny. You actually are funny.!! And you are real good as well. Keep it up!!
@smerdoninbrawley
@smerdoninbrawley 6 жыл бұрын
Thanks, great video. I waste a lot of time stiffening my pieces up with a heat gun and still tend to mess them up. I'm going to try it your way!
@lunarribbon917
@lunarribbon917 3 жыл бұрын
Thanks for all these beginner's videos, very helpful and informative and your voice is calming!! Also enjoy the patience and your step by step way, just started taking pottery classes and using the wheel so this is reinforcing everything :)
@dianwilliams2919
@dianwilliams2919 3 жыл бұрын
HeyTim,I just come across your videos. They are so much help. Thank you so much. You explain things so well. I’m enjoying watching every video. Thanks again, I’ve got a renewed excitement.
@fishjackass
@fishjackass 6 жыл бұрын
Thank you so much for this video. I have been using my tool all wrong and as a result quit using it, now I can go back to using it and getting great results.
@catrmr8
@catrmr8 2 жыл бұрын
This was very useful! Thank you so much for all the concise information 🙏
@therabbitswhisper
@therabbitswhisper Жыл бұрын
easier then the way my instructor showed me, thanks
@marthahunter7096
@marthahunter7096 Жыл бұрын
THANK YOU! I've been looking for this exact demo for a while.
@slgray9446
@slgray9446 Жыл бұрын
Tim you make it look so easy. Will try!! Thanks so much
@bettytaylor9430
@bettytaylor9430 5 жыл бұрын
Awesome, now I know what I've been doing wrong. When I try to remove the skirt from the piece, it always goes up against the piece I just made. Soooo frustrating! Thanks for the tips!
@sonidosrelajantes901
@sonidosrelajantes901 3 жыл бұрын
i didnt even know the right words to google- but this video is just what I needed! thank you so much!
@Hud_Adnan
@Hud_Adnan 4 жыл бұрын
Thanks for this great collection of tutorials, dude you should do more
@sofiamesa6156
@sofiamesa6156 3 жыл бұрын
Very helpful! Thank you :)
@binayakmalu3252
@binayakmalu3252 6 жыл бұрын
Dude ur awesome make more videos Plzz... love them
@christinediaz7077
@christinediaz7077 6 жыл бұрын
Best intro song.
@justpuppies9161
@justpuppies9161 Жыл бұрын
In my throwing class I use a bat and take my pots off when they're a little less "fresh". I feel the judging eyes on me all the time :/ This will definitely be something to practice. Thanks for going through it!
@timseepots
@timseepots Жыл бұрын
You will get it!
@blazingcontinue4693
@blazingcontinue4693 2 жыл бұрын
Thankyou so muchh^^
@-Oddish-
@-Oddish- 3 жыл бұрын
This has been one of my biggest obstacles somehow, can’t believe I didn’t think to scrape the sides
@0211brucetube
@0211brucetube 3 жыл бұрын
Ah I think my problem is that I don't remove the excess slip with the rib tool, so my piece is still really wet when I pick it up and it warps straight away. Thanks for the tip
@kenblack7039
@kenblack7039 4 жыл бұрын
Thanks for the excellent demonstration. How do you remove a moderate bowl? 8 to 12 inches wide
@timseepots
@timseepots 4 жыл бұрын
Ken Black those I keep right on the bat
@ScottMcCormick12358
@ScottMcCormick12358 6 жыл бұрын
Love the "snowbank" clay removal technique! Have you tried 6 inch hydrobats from the Ceramic Shop? They help the pot dry very evenly because they suck moisture out of the bottom of the pot. When approaching leather hard, the pot pops of naturally without having to be cut. Thanks for your video!
@timseepots
@timseepots 6 жыл бұрын
Scott No room for that amount of bats when you throw 40-50 pieces.
@ScottMcCormick12358
@ScottMcCormick12358 6 жыл бұрын
Have you ever tried the hydrobats?
@timseepots
@timseepots 6 жыл бұрын
yep, hey were heavy, took up a lot of space in use and when stored, and Irimm pretty much everything I make so a flat smooth bottom was never a need.
@ScottMcCormick12358
@ScottMcCormick12358 6 жыл бұрын
I don't need a flat, smooth bottom, but I do like that the bottom has similar water content as the rest of the pot.
@noalbalint3900
@noalbalint3900 3 жыл бұрын
what happens after you finish a piece? trying to recall from my lesson last summer: - let it dry until leather-hard - put it upside down on the wheel with a little bit of water to create a seal - trim excess and create a foot - bisque fire - sand off lip and abnormalities - put wax on the foot (and anywhere else you want not glazed) - glaze - fire anything else I'm missing/forgetting in the lifecycle?
@timseepots
@timseepots 3 жыл бұрын
You can deal with the issues that would needed to be sanded at leatherhard or bone dry.
@timseepots
@timseepots 3 жыл бұрын
You don’t need to wax either
@mtsafer
@mtsafer 6 жыл бұрын
I find a lot more success when you turn the wooden tool blade so that it is cutting through the clay, no pointing up.
@timseepots
@timseepots 6 жыл бұрын
Martin Safer well that probably is because of other things you are doing or not doing. You likely start above and move down and into the clay.
@mtsafer
@mtsafer 6 жыл бұрын
You are quite correct, I then undercut it with a knife or needle tool so it cleanly comes off the wheel
@debbiesilvan8325
@debbiesilvan8325 Жыл бұрын
Where do you place it after you pick it up.
@timseepots
@timseepots Жыл бұрын
I put them on what’s called a ware board. Normally a board will fit about 8 mugs. They are made from plywood.
@swissarmies
@swissarmies 3 жыл бұрын
Missed the cat pic at the end :(
@DunoonVanRijn-dx1hr
@DunoonVanRijn-dx1hr 5 күн бұрын
Less personality please
@timseepots
@timseepots 5 күн бұрын
@@DunoonVanRijn-dx1hr I’m gonna do things the way I do them.
Throwing Quickly and Efficiently
13:08
Timsee clay
Рет қаралды 55 М.
Beginner Wheel Throwing Class
18:00
Timsee clay
Рет қаралды 960 М.
🌊Насколько Глубокий Океан ? #shorts
00:42
World’s Deadliest Obstacle Course!
28:25
MrBeast
Рет қаралды 159 МЛН
Incredible magic 🤯✨
00:53
America's Got Talent
Рет қаралды 41 МЛН
Wetting Your Work.
6:42
Timsee clay
Рет қаралды 18 М.
Tim Cam, a Potters Eye View
6:44
Timsee clay
Рет қаралды 17 М.
How to Remove Pottery from The Wheel - The Wire Removal Technique
11:33
Throwing some bowls with different views
12:15
Timsee clay
Рет қаралды 60 М.
VEVOR pottery wheel (part 2) more honest thoughts by Simon Leach
19:50
Trimming For Beginners + Tap Centering Trick
20:50
Earth Nation Ceramics
Рет қаралды 390 М.
More on Centering
12:27
Timsee clay
Рет қаралды 119 М.
A Beginner's Guide to the Wheel/Throwing a Bowl
20:55
Jasmeet Studio
Рет қаралды 101 М.
Basics of Throwing a Cylinder 1lb vs 2lb
21:28
Mudgirl Pottery
Рет қаралды 21 М.
Opening Out the Clay for Beginners. Wheel Throwing Pottery Series.
6:30
Когда летишь первым классом VS эконом классом
1:00
Время горячей озвучки
Рет қаралды 1,7 МЛН
Magic Mirror: Who is Smart
0:41
Wow Toon
Рет қаралды 4 МЛН
THE POLICE TAKES ME! feat @PANDAGIRLOFFICIAL #shorts
0:31
PANDA BOI
Рет қаралды 24 МЛН