Repair DAMAGED Cardboard Compacting Auger drive shaft

Repair DAMAGED Cardboard Compacting Auger drive shaft | Machining & Welding

Рет қаралды 1,433,035

3 жыл бұрын

In this video we are repairing a damaged auger drive shaft off a cardboard compacting machine. The shaft on the auger drive has been badly damaged from the bearing locking up. To repair this we need to set that part up in our lathe and machine out the damaged shaft material to prep for welding. We then set up the shaft on our rotator and weld with ER70S-6 mild steel MIG wire. The auger drive shaft is then back in the lathe to finish machining the weld down to spec.
In this video we are using:
- TM-26120G Centre Lathe
- WIA 500i Weldmatic welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubscribe
Join our Patreon community: / cuttingedgeengineering
To see more follow us on online here:
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
Official CEE Merch shop: www.ceeshop.com.au
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com/shop/cuttinged...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: www.epidemicsound.com/referra...
Song: Unbroken Spirit by Sunfish Grove
#australianmachinist #machineshop #machinist

Пікірлер: 1 800

@CuttingEdgeEngineering 3 жыл бұрын

Hey viewers thanks for watching todays video from our machining shop! It's been a while since we got out the 12mm button insert 😂 What did you think of the before and after on this job? 😎👍 Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳 Follow us online here: Instagram instagram.com/cutting_edge_engineering Facebook facebook.com/cuttingedgeengineeringaustralia/ Official CEE Merch shop: www.ceeshop.com.au

@motorcycleandtoolrehab1834 3 жыл бұрын

Another great repair!! makes sense to weld up instead of replacing the shaft section if machine is just going to be used for a few months, I'm sure it will last along time anyway. When is the Shaper going to be moved into the shop? Looking forward to that one. I've got a 26" Shaper which I bought of a Engineering shop in Rockhampton QLD that closed down around 3yrs back. It come with some heavy duty tooling for internal keyways etc which I will never use. I could send them down to you if you wanted them as I would never use them doing Motorcycle repair. I live up at Gympie which isn't to far away.

@michaelsawley6569 3 жыл бұрын

Friday wouldn't be the same without you guy's, thanks for week

@marceloa715 3 жыл бұрын

Já sigo vocês,achei boa a intenção de vcs não aceitarem contribuições para o canal.penso que trabalhão com o coração!

@james.d.8044 3 жыл бұрын

A work of Art !!!

@christopher20k 3 жыл бұрын

The stuff that you do is grate

@vudeulash7645 3 жыл бұрын

your "no Warranty repair" is better than most "Warrantied" repairs I have ever scene

@CuttingEdgeEngineering 3 жыл бұрын

🤣 thanks mate!

@vincenttrigg4521 3 жыл бұрын

Well it's Kurtis, of course it's gonna be amazing work haha

@mashrien 3 жыл бұрын

Glad someone seen the scene

@itsyoboyskinnypenis7898 3 жыл бұрын

Facts.

@randyharris6527 3 жыл бұрын

Spot on. 👍

@jacobszymczak9323 3 жыл бұрын

"Nothing is more Permanent then a Temporary solution that Works" I'm betting this shaft will be in use for a long time. Fantastic job

@masheroz 2 жыл бұрын

I wonder if it's still there...

@bigeggsr2336 Жыл бұрын

The machine was pulled out in July this year and was still running with no issues after the repair had been done.

@anton41 11 ай бұрын

@@bigeggsr2336cool, thanks mate!

@yachtsteve 5 ай бұрын

How many times have you done a temporary fix, and then gone back there 6 months later and alter the rest of parts whatever they happen to be to be the same as your temporary repair😅

@horsepants5848 3 жыл бұрын

Your camera work and editing is exceptional Karen! I love the hand held shots where you slowly walk into the scene, that really gives the viewer a strong sense of actually being there. Sometimes I feel like I should be handing Kurtis a caliper or patting Homeless.

@CuttingEdgeEngineering 3 жыл бұрын

Thanks very much! Really great to know it's being enjoyed 😄

@GlennTillema 3 жыл бұрын

Until I watched this channel I always thought welding was for joining metal together, I had no idea you could add material to where it was lost! Now I watch your videos and try to guess what you're going to do to fix whatever was brought to you. Thank you for sharing your work!

@CuttingEdgeEngineering 3 жыл бұрын

Hey Glenn thanks for taking time to watch mate glad you're gaining some insight from the vids. Cheers

@obviousness8113 2 жыл бұрын

@Glenn Tillema I do the same thing! I feel like those aquarium fish in Finding Nemo while they watch the dentist 🤣

@b0rd3n 2 жыл бұрын

Wow! That''s really nice to hear something like that! I truly envy you and the more than overwehlming moment you had when you figured it out! Thanks for sharing this man, really! You help me keep some faith in humans after all! Welding is great and so is machining! Enjoy yourself and every new discoveries you make!

@GlennTillema 2 жыл бұрын

@@obviousness8113 Yup! kzfaq.info/get/bejne/m7Cmm9KKq7mUcqc.html

@maidenlord6663 3 жыл бұрын

Oh by the way Karen you do great camera work I'm glad you talked him into filming these

@CuttingEdgeEngineering 3 жыл бұрын

Thank you!

@Watchyn_Yarwood 3 жыл бұрын

Fantastic work with the camera and editing!! I suppose you do the editing as well?

@whatyoudo9773 2 жыл бұрын

I love the way she follows the machinery like the wire feeding through the rollers, takes me back to childhood learning exactly how it all functions.

@Watchyn_Yarwood 2 жыл бұрын

@@whatyoudo9773 👍

@spangy8405 2 жыл бұрын

not to mention the superb music selections ... Karen is a natural at creating an award winning video doc. This lady is as talented as Kurtis ... what an awesome couple.

@scottmclennan6114 3 жыл бұрын

Jesus that bearing must have been howling when you see how much it gouged out.

@hdezn26 3 жыл бұрын

I bet the operator had to wear earplugs to run that machine before they decided to fix it?

@MatthewTinker-au-pont-blanc 3 жыл бұрын

@@hdezn26 Prolly all the time anyway!

@PhilG999 3 жыл бұрын

From my time in the bearing business that was the first thing I thought of! Just never understood how customers would run a machine to total failure instead of having it fixed sooner (and cheaper)...

@timothyball3144 3 жыл бұрын

"I came in today and it was howling. It must have been nightshift."

@bogdan_n 3 жыл бұрын

I think this was way past the howling phase...

@Dimythios 3 жыл бұрын

We both know that shaft bearing has never been changed. What you did was a very nice job and if taken care of that repair will last.

@francisschweitzer8431 3 жыл бұрын

It’s so good to see a young guy with his own shop ... doing REAL WORK .... with REAL VALUES! Even though it’s a No Warranty repair you still went above and beyond.

@spangy8405 2 жыл бұрын

bang on ... you hit that nail on the head .... Kurtis AND Karen give me hope for the future of mankind ... please have children K&K, keep that DNA line going.

@MichaelKingsfordGray Жыл бұрын

@@spangy8405 Whereas anonymous cowards like you should never be allowed into the gene pool. Not even at the shallow end.

@Rightwinger1982 3 жыл бұрын

When I see a new CEE video come, I stop and make a cup of coffee and watch from beginning to end, in full screen! No skipping ahead!

@CuttingEdgeEngineering 3 жыл бұрын

Thank you mate! That's a heck of a compliment in the world of KZfaq

@terrycannon570 3 жыл бұрын

@@CuttingEdgeEngineering I also watch non stop. It is 3:20 AM here and way past my bed time but don't dare stop watching until the end.

@andrewpowell6457 3 жыл бұрын

@@CuttingEdgeEngineering same here watch all new episodes right to the end.

@markfryer9880 3 жыл бұрын

Skipping ahead on a CEE video? Do people really do such things? Is that even allowed? What a strange concept!

@jw4620 3 жыл бұрын

These videos are the one time I know it will end well.

@joelhenderson5404 3 жыл бұрын

Kurtis your wife has the sweetest voice and laugh so sweet.

@Splits-man 3 жыл бұрын

Quite a “looker” too! 😉

@upinarms5752 3 жыл бұрын

cringe

@deplorablelibertarian 3 жыл бұрын

Maybe keep stuff like that to yourself….l dunno, that’s just me.

@Watchyn_Yarwood 3 жыл бұрын

@@deplorablelibertarian 👍

@antiussentiment 3 жыл бұрын

You two are actually adorable. I'm pretty sure most couples would not be able to work together the way you do. Power to you both.

@ryantemple4139 3 жыл бұрын

I look forward to these weekly videos more than any other channel on KZfaq. I also like that you guys aren’t flooding the channel with videos everyday and instead just producing quality content.

@Dave_9547 2 жыл бұрын

It brings back great memories of cranking handles, watching chips roll off the cutting tool. Manual machines are so much more satisfying to operate than just pushing buttons and looking through a shield because you can feel the machine working with your hands.

@obfuscated3090 Жыл бұрын

Manual repair machining rules for repair machining since it's faster to make the cuts then code to make the same, generally few, cuts with a CNC.

@johnmcclain3887 Жыл бұрын

I retired out of machine work after installing several CNC machines, doing the moving, electrical and electronic connections and just enough "watching time" to know they were properly installed. I had no desire to continue on without the manual machines.

@Holli622 3 жыл бұрын

When a "no warranty" job comes out good as new, you are so humble Kurtis!

@johnoconnor4941 3 жыл бұрын

Thanks to all three of you, Homeless for looking viciously cute, Karen for her excellent camera work and, of course Kurtis, for his frustrating expertise, including all the swear words. Real work, real life, real good. Thanks

@CuttingEdgeEngineering 3 жыл бұрын

Great comment mate you captured exactly what we wanted the channel to be about. Cheers! 😎👍

@vincenttrigg4521 3 жыл бұрын

Homeless? Is that the dog's name? Just I know Karen is Kurtis's partner. Sometimes I just don't pick up on things unfortunately lol

@HappilyHomicidalHooligan 3 жыл бұрын

@@vincenttrigg4521 Yes, Homeless is the name of the Safety Compliance Arfacer...

@davidbaleta5370 2 жыл бұрын

I would give that kind of skill and workmanship a lifetime warranty. Excellent.

@ariedekker7350 2 жыл бұрын

First thanks for making the video and showing it to me. Fortunately this was only a short, not too thick shaft. I once did a similar repair on a very large thick axle. Same problem, bearing stuck. I also welded this axle. I only did that welding on a lathe. Reason: I didn't want to stop welding and attached the welding torch to the support. Gives a much more regular weld. The reason the bearing got stuck was because the fit of the outer ring was too tight. I made sure that the outer ring had a loose fit and put pressure on the outer ring with a cup spring. The machine has never given a problem again.

@terrystark2433 3 жыл бұрын

Impressed with the steady hand accomplishing the welding on the rotator, Kurtis. Karen, great videography, as we are all accustomed to👍 Who's a good boy Homeless🧸

@gregk.6723 2 жыл бұрын

Should be in horizontal and not vertical position while welding.

@jonka1 3 жыл бұрын

At the start your safety officer is clearly very concerned that this job is too far gone to be repairable. Then right at the end the look of wonder and respect on his face is a picture. His sigh of relief is perfect.

@CuttingEdgeEngineering 3 жыл бұрын

😂 he's very committed to his job!

@vincenttrigg4521 3 жыл бұрын

I am either missing a joke or I'm living in another universe cause I'm not seeing a safety officer lol

@jonka1 3 жыл бұрын

@@vincenttrigg4521 It's the dog. He's been known as the safety officer for some time now.

@ronwilken5219 3 жыл бұрын

@@vincenttrigg4521 Newby? Must be.

@vincenttrigg4521 3 жыл бұрын

@@jonka1 that's what I was thinking a while after I posted my comment but I could have been wrong so I thought it would be better off waiting on the answer. Thank you :)

@SilverbackE12B Жыл бұрын

Master class work. I’ve been binge watching the channel ever since I discovered it. Your work with a lathe is just simply impressive. I’m a millwright in the states (precision industrial mechanic) and by god this is the best channel I’ve seen in a long time that truly puts great effort into a quality repair.

@muchopomposo.6394 Жыл бұрын

I'm not from an engineering background, so these vid's are fascinating. Curtis is cool, Homeless is class and the camera operator/director/editor does a great, if not anonymous job. Bravo! 👏

@emdsdownunder 3 жыл бұрын

Got my CEE Australia cap and coffee mug recently Guys!!, thanks for that 👌🇦🇺,………glad to support You in some small way, and You Guys should be proud of everything You have accomplished with CEE,……A Proud Australian business!! 👍👌💪🇦🇺🇦🇺……go well and take care ☺️👍

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate thanks for the support we seriously appreciate it and glad the merch arrived for you. Enjoy the vid Cheers 😎👍🇦🇺

@phillipcave1197 3 жыл бұрын

Hey Kurtis, I've been waiting once again for your video. I look forward to them every week.

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate! Thanks for waiting we've got some bonus vids in the works to make the weeks go faster coming up 😎👊💥

@ibTeeMac 3 жыл бұрын

@@CuttingEdgeEngineering More late nights for me here on Vancouver island, Canada as I can't wait till morning but always worth it.

@waymamma 2 жыл бұрын

Awesome work building up that shaft with the MIG - no inclusions just pure new metal. Love it!

@djhaloeight 2 жыл бұрын

Outstanding work as usual!

@llloyd4 3 жыл бұрын

"Machine is going to be replaced in a few months... " , I am * almost * willing to bet dollars (US) to donuts that you'll get this exact same auger drive shaft back in a few years when the bearings fail again. :D

@CuttingEdgeEngineering 3 жыл бұрын

😂 seems to be what most viewers are thinking. Thanks for watching

@kenp3L 3 жыл бұрын

Have you priced donuts lately?

@94XJ 3 жыл бұрын

That or it'll be sold off as refurbished

@mashrien 3 жыл бұрын

People that say this shit are 99% just trying to save face and not have to admit "we're broke AF and are barely staying afloat, I/we can't afford the extra $xxx for a proper repair" and are going to be using that machine for years to come. They'll probably even take it to a *different* machine shop next time, again, to save face and not be recognized lol Edit: I speak from experience. I've had to have stuff repaired and not been able to get a _proper_ job done, just " _good enough_ " to get me by a while, because I was soo damn poor lol

@keithgutshall9559 3 жыл бұрын

I like donuts!!

@KarateSensei71 10 ай бұрын

I absolutely love your content. Karen is the best videographer on KZfaq, she seems to get into the details for Kurtis' masterful work and shows so much ofteh behind the scenes detail and all of the steps. It is fascinating. Homeless is such a joyful pup, always brightens my day to see him healthy and happy you are great examples of how humans need to be. I hope that "Yeah Buddy" was a shout out to Ronnie Coleman!

@jakemoeller7850 3 жыл бұрын

I love watching your videos! As an artist, I appreciate the detailed work and the time expended. 👍🏻👍🏻👍🏻

@ray6652 3 жыл бұрын

Hi Kurtis. I love watching your videos, As I like engineering. I would like to say I think your one of the best engineer I have seen on youtube. Because you explain everything you are doing, or the process you are going to do with anything that comes through your door.Just brilliant.

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate thanks for watching and this comment is awesome we appreciate it!

@Splits-man 3 жыл бұрын

It just doesn’t get any better than this does it boys? A Cutting Edge Engineering video to end the week! 👍

@Watchyn_Yarwood 3 жыл бұрын

There is, however, one BIG problem with CEE videos. We only get one per week!!

@Splits-man 3 жыл бұрын

@@Watchyn_Yarwood Agreed!

@williamkerr3350 2 жыл бұрын

Pride in your work and a settled attitude, you're a bloody good operator mate,a pleasure to watch,thanks

@TomokosEnterprize 3 жыл бұрын

Good day. I have always found that most folks that can weld well are not comfortable in the machine shop and vice/versa. Those that can do both well like you and I are rare beasts for sure. It's great to sit here through the process and the outtakes at the end always break me up. Thanks a bunch and have beauty days to come eh.

@CuttingEdgeEngineering 3 жыл бұрын

Hey Dean hope you're having a good week mate. Thanks for always watching and commenting! Cheers, Kurtis

@TomokosEnterprize 3 жыл бұрын

@@CuttingEdgeEngineering When I retired I lost access to he equipment but not the memories of the one-off repairs I would get. I tried a factory type job and by the end of the first week I was out of there like I was shot out the barrel of a 12 ga, LOL. In my work at the logging shop I never knew from day to day was coming at me. I never really knew what a great place it was. Oh well I have you to help fill that void for me. Great videos mate ! ! !

@AngusOg69 3 жыл бұрын

Morning from sunny Glasgow Scotland and strangely it is sunny.

@CuttingEdgeEngineering 3 жыл бұрын

Have a great Friday over there mate

@wuggacrt 3 жыл бұрын

'' I don't want to spend any money on it'' says every Owner ever.

@CuttingEdgeEngineering 3 жыл бұрын

🤣☝️ accurate

@slidey1788 2 жыл бұрын

Sounds about right. One of my tasks today at work was repairing a cylinder base eye, without doing a reseal of the cylinder. Weld up with the spear extended to avoid melting the piston seal. Then into the mill for a bore. Just another day at the office.

@sayfuddinjauffurally Жыл бұрын

it's a pleasure watching you doing your things...thanks for all your videos mate...

@mehshovely 3 жыл бұрын

Exceeding expectations per usual. Excellent work CEEA!

@MacGyver-1 3 жыл бұрын

Best part of Friday morning is Cutting Edge and a fresh ground cup of coffee

@CuttingEdgeEngineering 3 жыл бұрын

Awesome mate enjoy and have a good day 😎👍

@tda2806 3 жыл бұрын

Customer states, I am going to switch the machine out soon, so don't do a full rebuild, 12 months later, following Kurtis's repair, why would I swap it out it's working fine.😂🤣😂

@hdezn26 3 жыл бұрын

With a nice rebuild like that , they probally would keep the machine many more years.

@steveb6103 3 жыл бұрын

I've heard it before and it's more like 5 years later! These augers can really pack cardboard ! 2 to 1 over a standard compactor. They blow apart a normal rolloff box. That's what I work on,

@billy19461 3 жыл бұрын

Yea and 5 years later he wants a new one because your repair failed.

@moehoward01 3 жыл бұрын

@@billy19461 And he'll want CEE to pay for it.

@TheEvertw 3 жыл бұрын

I bet that is exactly what is going to happen.

@dangoodine5676 2 жыл бұрын

Another quality repair! Keep up the good work Kurtis!!

@upstairs202 2 жыл бұрын

I’ve never been this close to my lathe work and not have any hot ones down my shirt, in my ear or stuck to my nose. Enjoyed everything about this. Nice shop, tools, abilities, work ethic, videography, editing, sense of humor, but most of all the outtakes. Until I saw them, I thought this was the smoothest operation on the planet and now that I think of it-it is! Awesome work, both of you!

@justdoit4170 3 жыл бұрын

Found this channel about a week ago, then thought to watch a video I have not seen before. And lo and behold this one pops up just as I finished, must be my lucky day. :-) Great channel, excellent skills, wonderful editing and the safety inspector is the cream on the cake.

@CuttingEdgeEngineering 3 жыл бұрын

Welcome to the channel mate thanks for watching!

@vincenttrigg4521 3 жыл бұрын

I highly recommend watching more of the videos! If you liked this one then you'll love the others as well!!

@andrewsmith6406 3 жыл бұрын

You're in for a treat mate.

@justdoit4170 3 жыл бұрын

@@vincenttrigg4521 You're right. The last time I found a channel I really enjoyed I binge watched every episode which took over a week, and now I have to wait for the next episode and it drives me crazy waiting. Have learned my lesson this time, to take it easy, and watch one or two when it takes my fancy. :-)

@justdoit4170 3 жыл бұрын

@@andrewsmith6406 More than a treat mate, I get a lot of value from this channel. :-)

@kentuckytrapper780 3 жыл бұрын

Looks like you saved the day, that was bad, I've built up a few bearing surfaces but that was a save for sure. Great job.

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate respect and thanks for watching 😎👊💥

@DaleDirt 2 жыл бұрын

I had to come back and see this again , this will encourage for a project coming up . Great shots and narration . Your skill level is much appreciated by all , especially the ones you have saved there machines and put them back to work .

@tedmich 2 жыл бұрын

It can be a stress for a couple to work so closely together, but you two do a great job. As skilled as Kurtis's on camera machine work is, Karen's behind the scenes camera work, editing and scene composition is equally impressive, brava! I do worry about the dog being around so much chips! The metal ones, the other kind he can obviously handle...

@maxnex7676 3 жыл бұрын

First question to mind on the start of the video was why not spray weld, answered in first minutes, second question that came to mind, where did the measurements/specification come from, answered a few minutes later. Thanks guys, Friday started off well.

@terrycannon570 3 жыл бұрын

Homeless always makes me smile. I lost both my little Terroirs in the last 6 months to Coyotes . I sure do miss both of them. Homeless is such a beautiful dog.

@vincenttrigg4521 3 жыл бұрын

I'm sorry for your loss and wish you well

@CuttingEdgeEngineering 3 жыл бұрын

shit mate sorry to hear that! Glad our big boof head can bring a smile

@terryfromsouthcarolina4601 3 жыл бұрын

Curtis, once again you have done what my dad always said. You made a silk purse out of a sow's ear. Bang up job! Right proper finish too. Always a joy to watch someone else work.......and wish I was still doing it. Cheers! Terry from South Carolina USA

@ernestmathews4674 Жыл бұрын

Your film and edit work is a pleasure to watch, and being taught good careful practices and problem solving is frosting on the cake. Please continue.

@ibTeeMac 3 жыл бұрын

Fantabulous video as usual. Tough work being a safety inspector oh and love the little dig about the cling wrap at the end. Well played Karen...

@CuttingEdgeEngineering 3 жыл бұрын

🤣 cling wrap is the devil! Thanks for watching mate glad you enjoyed it

@matthewmccormick2417 3 жыл бұрын

Always glad to see the STAR of the show "The Pup" is happy. You the Wife and the Pup are always a good show. Thank you for another great Video. Stay safe God bless.

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate thanks for taking time to watch and comment

@guygriesmann1234 Жыл бұрын

Great work. It is amazing how you bring these damaged pieces back to use.

@aquilaaudax6033 3 жыл бұрын

sittin' back watching "Rocky Mountain Race Week" vids, CEE pops up, Pause, Switch, Luvin it, CEE, showin' us all how, the true Aussie Way, Always something different in the shop, Kurtis (Head Machinist), Giggler (Karen, all rounder), Homeless (Safety Officer)

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate! Thanks for taking the time to watch the video seriously appreciate that support. 😎👍

@Dsp.Studios 3 жыл бұрын

Spot on! I really hope you guys expand your business world'wide, this way, maybe I'll get to work for you guys on similar large-scale projects 👌

@derkaderka5910 3 жыл бұрын

Brilliant job on the cling wrap! The repair was pretty cool too.. Enjoy that beer Carl, you earned it!

@VK2FVAX Жыл бұрын

Excellent work. Outtakes were great. Good job.

@amandugamage4642 3 жыл бұрын

Thank you for the vid mate! really appreciate the quality of your work and the camera work of the lady.

@CuttingEdgeEngineering 3 жыл бұрын

Thanks for watching glad you enjoyed it 😎👊💥

@blastingweevil2968 3 жыл бұрын

perfect repair cant even tell it was repaired as we have come to expect with your work so much care and attention to detail !!!

@JohnH20111 6 ай бұрын

and i would bet Dollars to Pesos that the part that was repaired will outlast the machine that it’s installed on, due to the high quality of the machine work that was done

@josecondemarin9586 3 жыл бұрын

Kurt you have save your customer a lot of money doing this repair shame on them for not doing the proper maintenance the repair is better than getting a new part and no warranty as it should be the damage was so severe. But you came to the rescue. Love the video, I can't wait for the video every Friday here in the states. Thanks take care.

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate thanks for watching and supporting the channel we really appreciate it. Cheers!

@ulrichminky9495 3 жыл бұрын

That close up welding footage was brilliantly filmed. Great job.

@markgriffin4888 3 жыл бұрын

If you had used the micrometer as aa G clamp , you would have been spot-on 😆😆😆😆😆😆

@morriewyatt6234 3 жыл бұрын

Yep, precision G clamps.

@Gnaus76 3 жыл бұрын

Amazing that you don’t have any “air” bubbles in that weld 👍

@shaunharrison1693 2 жыл бұрын

You are one hell of a machinist! Your work speaks for its self.

@JohnH20111 6 ай бұрын

absolutely !! and word of mouth about the high quality of his work is just about the best way to advertise and promote his shop, and also bring in more customers

@leongarofalo1821 3 жыл бұрын

Just gotta say I love the outtakes...typical soft spoken machinist! I've watched every video to date and yall got a fan for life for sure! Love the quality of your work! Could watch this for days on end!

@CuttingEdgeEngineering 3 жыл бұрын

Hey Leon thanks for watching mate glad you're enjoying the vids

@Ham68229 3 жыл бұрын

Have to say but, that was definitely one of those pure neglected type machines. I'll take you're "no warranty" work over many other's so called professional work. Just a pure pleasure to watch and see your quality of work. Awesome work as always, great video. Cheers :)

@CuttingEdgeEngineering 3 жыл бұрын

Thanks for watching mate

@fulgwar 3 жыл бұрын

I think this is the first video I've ever seen you indicate when you mounted the part. I thought you might have some special Aussie magic or a calibrated eye. :D love the vids!

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate hahaa we've shown a few snippets in older videos just prefer not too, boring AF and plenty of other channels make up for it 🤣👍

@gregparks307 3 жыл бұрын

So nice to see a man who truly is a craftsman!

@markuspesonen5281 2 жыл бұрын

Last minutes were priceless!!! thank you.

@AndyMcBlane 3 жыл бұрын

Great end to my week every week is getting home from work and watching these. Great video as always mate.

@CuttingEdgeEngineering 3 жыл бұрын

Nice one glad you enjoyed it and have a good weekend mate

@user-tw9io9nz2m 3 жыл бұрын

“Coming soon, Kurtis is getting a quick change tool post” I hope that’s not a joke, I’d be pretty excited to see which one you’d pick

@CuttingEdgeEngineering 3 жыл бұрын

It's not a joke 😏

@andrewsmith6406 3 жыл бұрын

Not gonna happen .

@markfryer9880 3 жыл бұрын

@@CuttingEdgeEngineeringWTF????? Say what now????? Karen is Kurtis feeling all right?

@randytravis3998 3 жыл бұрын

@@CuttingEdgeEngineering you might get one but the big question is well you use the quick change post ,, or will it become a costly paper weight ,,,

@Azlehria 3 жыл бұрын

@@CuttingEdgeEngineering But the real question is what kind: dovetail? Multifix?

@christhomas2825 2 жыл бұрын

Been welding since 1998 and I worked in a machine shop for 8 years. I've done so much build up like this. I've never seen it done in this position. We were always able to turn the shaft into the horizontal position. Pretty cool to watch.

@jacevedo770 2 жыл бұрын

Sir you and the Mrs are masters at your crafts! Thank you posting another great video!

@samspade4634 3 жыл бұрын

Regardless of what you are fixing, it is always great to watch a master at his craft. I love the videos and the engineering talent you have is second to none. Thanks for sharing. Very entertaining.

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate thanks for watching and commenting. Cheers!

@peterparsons3297 2 жыл бұрын

nice welds, i have done that sort of thing many years back, we didn't have mig in those days and nothing worse than finding a bit of slag or porosity where it hadn't been welded right

@bkailua1224 2 жыл бұрын

Outtakes are priceless

@perrymcguire3664 2 жыл бұрын

Nice job on that shaft. Love your out-takes.

@bagerandtager 3 жыл бұрын

No arrows pointing to the damage this time 🤣

@CuttingEdgeEngineering 3 жыл бұрын

Wish they did it would have definitely helped 😂

@bagerandtager 3 жыл бұрын

@@CuttingEdgeEngineering 😂

@davidallinson2501 3 жыл бұрын

Very good job. I do some turning and I can see you managed an excellent finish. The packing machine running with the busted bearing grinding into the shaft must have been truly painful to witness.

@davidtooley420 3 жыл бұрын

That quick change tool post will be great to see in action! Thanks for another awesome video 🙏🏾

@tomcampbell6363 3 жыл бұрын

The outtakes are awesome!

@dieterhinders9237 3 жыл бұрын

Hello Kurtis, this was really a lot of welding. Well done. Like others I think that you will see it again in your shop after a couple of years.

@outbackladas 3 жыл бұрын

Nice job, well done 👍. I used to do the same sort of thing on stub shafts etc many years ago, however I didn’t have the advantage of a mig in those days. It was mostly stick welded, that made a long drawn out process of it, fortunately things have progressed since then.

@CuttingEdgeEngineering 3 жыл бұрын

Good one mate! Yeah mig has come a long way the past decade. Thanks for watching 😎👍

@chuckmadere 3 жыл бұрын

I really enjoy watching your videos. You have so much pride in your work and it comes across every time. I am believing that your wife does the camera work. Big shout out to her for doing a great job. Thanks for sharing your videos with us all.

@iamtheverybestever 3 жыл бұрын

So satisfying on every level. Keep up the good work.

@metubewot 3 жыл бұрын

Great welding /machining. Pro grade filming/editing. Loved it. Regards to Homeless.

@CuttingEdgeEngineering 3 жыл бұрын

Thanks Ian glad the videos and work are being enjoyed 😎👍

@theolathrop8343 3 жыл бұрын

Always look forward to your videos! Homeless is so adorable

@CuttingEdgeEngineering 3 жыл бұрын

He was being a big sook, cold winter day kept him inside haha

@tbateman9902 2 жыл бұрын

You do amazing work! And love the Safety Inspector

@davidpayne2880 2 жыл бұрын

Very good job. I enjoy watching you work and explaining the reason you are doing it per the customers request.

@pollepost 3 жыл бұрын

You really have some skills. Have a nice weekend, Karl and Karol :D

@CuttingEdgeEngineering 3 жыл бұрын

🤣🤣🤣

@9976mwhite 3 жыл бұрын

As always, Great video!! Feel free to add the background clock when you think of it, especially for the time lapse. It looks amazing showing how long it took.

@CuttingEdgeEngineering 3 жыл бұрын

Thanks for the feedback!

@glennp9904 3 жыл бұрын

Love your work. Who would have thought that watching something going around would be so interesting. A special thanks to your fantastic camera person too.

@sonoragingerdoodles 2 жыл бұрын

Absolutely excellent video. Thank you!

@hdezn26 3 жыл бұрын

Dang, they tore that up real good...

@Jcreek201 3 жыл бұрын

Your vids always get posted at midnight my time.. Luckily, it's the one day a week I work graveyard. Always makes my Fridays go by so much faster!

@CuttingEdgeEngineering 3 жыл бұрын

We do it for you 😉😂

@hdezn26 3 жыл бұрын

At least the day shifters are asleep by then. At least I can watch videos in peace. Till, I see daylight again and think, Oh crap I stayed up waaayy to late again...

@andrewsmith6406 3 жыл бұрын

They show up about the perfect time for me in West Aus, finish work, couple of pints at the pub with work then home to watch Campbell work his magic.

@denniswhitley9916 2 жыл бұрын

You are an inspiration, I love watching you work .Im into cnc machines, mostly mills

@emmaa427 2 жыл бұрын

That was an awesome reconstruction!

@keithmatthews1673 3 жыл бұрын

For a 'cheap' repair that was impressive and cleaned up pretty well! Great camera work on this one too. Hope Homie is OK - he did not seem his usual ebullient self.

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate thanks for the great comment! Yeah he was alright just being a sooky it's winter and a bit colder than normal 🤣

@chrissandles4833 3 жыл бұрын

Always keeping me entertained on the night shift here in the states. Keep up the great content! Also that pooch NEEDS a girlfriend.

@CuttingEdgeEngineering 3 жыл бұрын

Awesome glad you can watch and enjoy. Haha he's had a girlfriend and ended up making 8 pups 😂👍😏

@chrissandles4833 3 жыл бұрын

@@CuttingEdgeEngineering now that’s funny. Probably denying the whole incident.

@karlhrdylicka 3 жыл бұрын

@@CuttingEdgeEngineering That's what you get with one like a ripper shank.

@rclc93 3 жыл бұрын

@@karlhrdylicka LOL

@xmachine7003 2 жыл бұрын

@@karlhrdylicka 😂😂😂rippa

@anointed852003 2 жыл бұрын

The shop i work for does alot of work like this on shafts for flaking and cracking rolls. In almost ten years I recall only one instance of a shaft breaking after welding. Great work!

@dennisc3238 2 жыл бұрын

What I really like about all your vids is that, not only doing such fine work, but that you have a bit of fun along the way. Throw in shots of Homeless's antics along with the outtakes, and voila, fascinating and entertaining all in one.