Glad I could help 🤙🏽

I could’ve saved more time just getting a replacement screen and you could’ve had the job done in 15 minutes

Yea it’s bad in them 300s 🤦🏾‍♂️ do we have to replace the screen or just clean it ?

@@donariusragland6319 no you don’t need to replace your screen. Just be very careful cleaning it with goo gone

Dang I pulled mine off by accident....... any suggestions

Did u do it how did it come out?

@@gtkid3289 waiting to get a quote from the dealership before I do

@@killswitchh I crack my screen and i can hear the beep when I touch ot

Order from Cuscreens comes with screen and digitizer for like $350. No more glue as theirs do not have any and screen is 30% brighter than original.

@@Mrv1960 eh, I'd rather save 300 and remove some gunk

I broke mine and it still works

Thanks I greatly appreciated the comment and you tuning into my channel

@@bj_from_the478 Hi BJ, you have some killer skills, knowledge, and patience, keep up the good work.

I also have this question.

@@westonbranchick1516 I ended up just buying a replacement screen. The thin electrical tape didn’t allow for a large enough air gap and caused numerous other failures (random touches, multiple touches, etc) but the thick mounting tape was too large and didn’t register touches. Not sure what I was doing wrong but I just ended up buying the replacement screen for like $300

Let me know how it turns out

Turned out great! It took forever to get that glue off but awesome thanks again!

First thing first they don’t ride the best pot holes will destroy them and you have too run small tires I don’t recommend them for daily driving I rarely drive mine and it’s mainly for show

You need to replace the LCD

Thanks

I used a plastic tool and a razor

@@bj_from_the478 i figured out that if I go that deep, might as well replace the screen, but even with the mold spots it works and they arent noticeable with the screen on. They are visible if you flash a flashlight directly to the screen, so 🤷🏻‍♂️. For now it stays like that. Thanks for the tip and the video, though 😉

@@Kevin09210 I usually change them out for the dealerships when cars get traded in because when the screen and the interior looks good and new the vehicle looks a lot better and it looks like it’s been taken care off and they buy them 🤙🏽

@@bj_from_the478 could you please read my comment. Im not trying to rush you or anything I just want you to see them and your opinion on my situation. Thankyou for your time

@@Kevin09210 a quick point which may be of issue is the spot size. If they head towards 3/16 you might be in the early stages of digitizer delamination . The next phase will change the spots to more whitish and micro bubbly. And glitches may be crazy. Looking at your screen from a high angle and offset might show the space between the digitizer and screen and then the black spots may be more visible on the digitizer only. Hope this helps

The digitizer should have came with double sided tape on it you probably have it too far away from the lcd

@@bj_from_the478 I removed the double side tape that came pre-installed on the digitizer and put some white Gorilla tape. I saw other videos and read online forums that the white double-sided Gorilla tape works best. I unplugged the negative cable on the battery hoping that would reset the stereo. Unless there's there's another way to reset the stereo, please advice.

I sure do hit me up tomorrow 478-262-9307

Yes they are

Yes he never placed the digitizer back. I’ve seen people put a new adhesive like double sided tape in between the LCD and the old digitizer

I super sorry I had too edit some parts because I had people walking up asking me a million ? I do apologize about that Butt too answer your ? Just peel the double side tape off and reinstall your ribbon cable and your good as gold

Mannn we missed the main part we all wanted to see lol. I appreciate the video I truly do but everyone speaks about double sided tape to reinstall

Do you put double sided tape along the whole screen interior or just the edges???

I just did this for my 18 grand cherokee but I replaced the old digitizer instead of a new one and the strip disconnected. Any tips??

I’m in Macon ga my number 478-262-9307

That your issue

@@bj_from_the478 Yeah it sort of looks like the top half of the touch screen has a film or coating that is peeling or separating, like when something that's laminated starts coming apart.

@@dwunnamillion its actually glue in between the two, the heat from the car and from the heat hitting the screen causes the delamination.

Same problem, same car! I got a 2017 Dodge Charger with the same problem

Replacing the digitizer is always cheaper than replacing the screen the digitizer is just the Touch panel the lcd is the screen like your TV

Thank you I appreciate the help!

Was there a specific brand or it doesn’t matter?

Well the digitizer comes with strips on it

Just make sure you didn’t bend one of the pins on the back of the radio were the harness connect too give you power I’ve see people do it all the time 👍🏿

@BJ_From_The 478 Thanks. i will check that out.

@BJ_From_The 478 That wasn't the problem, so im back to square one.

That’s a great way too get it back too working Butt a lot of these vehicles I work on the screen looks bad and old the digitizer makes it look brand new thank for the info👍🏿

Well the digitizer should come with strips of double side tape on it Butt long story short the trim ring should secure the digitizer so it doesn’t move also it your screen is not visible anymore make sure that the main ribbon cable is locked into place securely

@@bj_from_the478 I did , not sure what’s wrong but now it’s just weird colors and I can press some buttons I just don’t know where they are and the music works just don’t see anything but weird blurry red and blue smudge marks etc. I thought that the screen had to be fused or glued to the lcd panel the way it comes from factory. I will check the cables again.

Not necessarily I think it’s a ground wire strip the wire back and ether glue it back or use some tape I think you’ll be fine

Okay what type of cleaner did you use because that LCD screen is very sensitive too certain cleaners and it can leave blemishes on the unit

You don’t have too purchase a new radio just change the digitizer and you’ll be fine by the way the Movie Christine was a great movie back in the day 😁

Yea they said 5g’s. They kept redirecting me and said I can only buy a full radio from them😂

Boss man I need some help wondering if you can give me some advice,,,I was having the same issue that you just fixed but none of my knobs don’t work,, ac controls don’t work,, any advice you can give me

Anytime 👍🏿

Sorry it wasn’t done on purpose I had too edit some parts because I kept getting interrupted by customers Butt too answer your ? The digitizer comes with double sided tape on it and just reinstall the ribbon cable

@@bj_from_the478 Okay, mine did not come with double-sided tape. They said they no longer provide it (this Amazon dealer).

It wasn’t it actually worked and played fine some of the touch screen wouldn’t work it had a mind of its own

I understand unfortunately all the 8.4 units use the amplified systems alpine Harmon kardon Boston acoustic and beats the 7” aren’t and it will pull in Butt you won’t have sound 👍🏿

I have a contract with the dodger dealership too fix there cars so there OEM Parts that are given too me per vehicle the ones on Amazon will work just aswell just read the reviews before you order it. The key too make this thing work correctly is too make sure you perfectly clean the screen and get all the glue off 👍🏿

@@bj_from_the478 thank you. I ordered mine today. Fingers crossed she goes back together well. :). Thanks again.

@@onevisiononegoalonegod744 well if you need some pointers hit my line 478-262-9307 I’ll help 🤙🏽

Haven’t had too fix that particular model butt I’m sure it can be done ✅

@@bj_from_the478 I believe it can be but thus far no one can source a new digitizer.

@@bj_from_the478 pardon but another question. Is it possible that the glue or whatever it is , might be incurred UV activated adhesive that the original production run didn’t cure? Respectfully

Also when i was taking apart the cable that the back portion has a connection to came off does this mean anything I was able to snap it back on. This is the first cable you see on your video not the second one

Okay first thing go I too the settings and restore too factory default it that doesn’t work take it back out of the dash and unplug the unit make sure all the pins are straight you may have list one too the side

If none of that works do you recommend anything else if im not mistaken there are only 6 cables from the car to the unit. Thankyou for responding the video was great as well

I’m sorry you took off witch ribbon cable

Well that’s a 50-50 shot in the dark and I can’t say that wouldn’t work Butt a new screen looks better and if it doesn’t work you’ll have too pull it all apart again 🤔

@@bj_from_the478 I actually watched your video top to bottom and took everything apart it was so much adhesive. Funny thing I fixed it last night

Sure reach out too me when you start your journey and if you have any? Call me 478-262-9307 Monday -Saturday 10am-7pm eastern standard time 🙏👍🏿

@@bj_from_the478where are you located?

@ATROXCUSTOMS I’m located in Macon Georgia

Just the digitizer

@@bj_from_the478 thanks man. My screen got cracked from an impact and the touch screen/function is no longer working. I can see the different pages and settings, just can't touch/change anything.

@@matthewjacques392 glad I could help

I tried this but couldn't get it to work. I had a guy tell me he was able to get most of the bubble out by just using a blow dryer?

Sure let’s start did you change the digitizer

478-262-9307 Monday-Friday 9 am-7pm 🙏

The razor was use too get between the digitizer and the lcd screen some I can start the removal process

Okay can you give me a call 478-262-9307 it’s some questions I need too ask you

Same here wondering why is this happening after fix

@@wansmith7499 you may need too check the ribbon cable again too make sure it’s plugged in correctly

@@bj_from_the478 the problem was the blue cable with the brown tape not being plugged in, it was ziptired under either the inside and i never saw it to put it back in it’s very simple and easy!

Put mines back together now touch not responding at all..any ideas? Using same digitizer

Okay was your reason for changing the digitizer was that the touch screen wasn’t working or was the screen black from the beginning

Changed because of ghost touching. Screen always worked and Screen was never black. Random ghost touches only

Any suggestions? Only thing I can think of is to double check my ribbon placement being that I can literally touch and toggle buttons on the screen...just no display at this point

@@hellyea939 just open it back up and make sure the ribbon cable is seated correctly

@@bj_from_the478 Troubleshoot: My ribbons seem to be seated properly and locked in. The 2 small notches on each side of the ribbons are definitely hooked and seated. Checked fuses also. Took them out and replaced after about 30 secs. Feels as if all the Glue is off the screen b4 I placed new digitizer. Should be because I spent 2 hours cleaning the dang thing. I bet I'll NEVER try something like this again. I Ruined my infotainment for the next 2weeks smh

Make sure the ribbon cable is secured properly

Were you able to get it working

You don’t have too use anything just clean it properly and install the new digitizer and your good

@@bj_from_the478 thanks 👍🏾 do you have a link as well to the one you use, tried looking up the number in the description it didn’t show anything

@@_.kvng.ky_1081so what your saying is just take off the original digitizer clean up the LCD screen and just slap the new one on with no glue or adhesive ? If that’s the case why not just clean up the old digitizer and re-use it

@@americanpatriot8996 the new digitizer should come with the adhesive strips on the outer layer. if throwing the old one back on just use double sided clear gorilla tape. he has another video looks just like this showing him putting the same digitizer back on using gorilla tape on the putter layer

Sir you should be able too solder that wire back too the bezel

what is that, wifi connection? @@bj_from_the478

Sorry butt I’m not understanding your ? Does the lcd have some discoloration on it

OEM screen is 1,300 if the customer wants too pay for a new screen I’ll change it

@@bj_from_the478 la084x01-sl01 or SL02 is $300 to $450 depending where to order it from. Just trying to justify the savings and time. Video of the guy with lcd swap makes it look like 1, 2, 3 and done. Is my brother's truck and we need to fix the lcd. Thanks

Ebay has a lq084x5lx01 for $200. That s the lcd screen with touch screen assembly

Your local dealership or Amazon

How do I know if I order right o e off Amazon

Sure if you want me too fix it just ship me your radio and I’ll fix it

@@bj_from_the478 and how long it takes you to finish everything?

@@bj_from_the478 How much is gonna be ?

Sorry about that check my channel out I have some updated version videos that maybe helpful

Sorry no glue is used on the new digitizer it will come with some double sided tape 👍🏿

Sorry I had too edit because I had some customers outside talking loud and there choice of works weren’t good so I apologize about that if you need technical support you call always reach out too me 🙏

Georgia

Okay you’d come out better replacing the entire unit and it’s cheaper

@@bj_from_the478 I seen that it was cheaper lol I didn't upgrade to the bigger one but I did get a new used replacement radio

You can try it Butt a new one looks better

I replaced the outside glass touch screen

Sure butt your not going too want too use any thing like that on a lcd screen prime example spray wd40 on you Tv screen in your house and let me know the outcome you’ll be in Best Buy tomorrow buying a new TV 😁 just be careful because that lcd screen is very sensitive and you can damage the screen 👍🏿

@@bj_from_the478 Why would I spray WD40 on a perfect working TV?

Because a bad digitizer looks awful old and dirty

Also I’m cleaning the glue off the screen no the digitizer

@@bj_from_the478 I did this repair today actually, took out the unit, cleaned the glue off the touchscreen and digitizer then placed double sided tape in between the two on the black border around the digitizer. So far no ghost touching. Only costed me some goo gone spray and the tape. Used your video as inspiration as well.

@@vapesan666 greatly appreciated thanks glad it helped

How thick double sided tape did you use on the black boarder

I’m in Macon Ga

Did you go to him ?

@@BunnySTL na I ended up getting a whole new one off Facebook market for 300

Macon Ga

You sure can

How do it turn out

Great, far less effort than this haha.

@@angryitalian3430 that’s what up

What site ?