Best Mower Deck Non Stick Spray. ( Mower Deck Undercoating Test Pt 2 )

Рет қаралды 131,916

Күн бұрын

Best Mower Deck Non Stick Spray. (Mower Deck Undercoating) Today we are going to be testing mower deck non stick sprays. I have 3 different non stick spray products that we are going to look at in this video. Dupont Non Stick Dry Film, Majic Easy Slip Graphite Spray, and Gunk Mower Deck Spray. I tested each product for 2 acres and we will see the results after about 50 minutes of mowing time. I also tested each product for corrosion resistance to see which products prevents rust the best.
Previous Mower Deck Undercoating Test: • Mower Deck Undercoatin...
Products used in this video:
Majic Easy Slip: ebay.us/sKooOG
Dupont Non Stick Dry Film:amzn.to/3Pl2neg
Gunk Mower Deck Spray: amzn.to/3PcVWd8
My Amazon Store: www.amazon.com/shop/repairgeek
Help support the channel, buy using my Amazon links
As an Amazon Associate I earn from qualifying purchases and your cost is exactly the same.
I source all of my service data from the same place that professional shops do. You can as well: www.pntrac.com/t/SENKSUZKRktD...
Questions? Shoot me an email at repairgeek365@gmail.com
00:00 Into
00:19 Products that we will be testing and testing conditions
1:14 How each coating sprays
2:17 Mowing conditions for the test
2:31 Corrosion testing
3:43 Results after mowing
5:24 How easily do they clean off?
6:22 Final thoughts. What is the best mower deck coating?
9:44 Outro
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user Repair Geek makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. Repair Geek shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by Repair Geek and therefore, Repair Geek does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge Repair Geek or anyone affiliated with Repair Geek, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

Пікірлер: 124

@RepairGeek 2 жыл бұрын

Products used in this video: Majic Easy Slip: ebay.us/sKooOG Dupont Non Stick Dry Film:amzn.to/3Pl2neg Gunk Mower Deck Spray: amzn.to/3PcVWd8 My Amazon Store: www.amazon.com/shop/repairgeek Help support the channel, buy using my Amazon links As an Amazon Associate I earn from qualifying purchases and your cost is exactly the same.

@snarfsnarfff Жыл бұрын

I was considering getting something like this for my mower deck but I think I'm going to pass on doing that. I appreciate you saving me the labor to do this. Thanks!

@Robert_The_Great 2 ай бұрын

Excellent and thorough test, Sir. I've had the same problem with grass sticking. I have a push mower (so it's relatively easy to continually clean/scrape the underdeck--but I want something that lowers the number of times I have to do it). I tried several sprays, including Gunk and DuPont. I will try the Magic Slip. Thanks again.

@killroy2993 Жыл бұрын

Majic graphite spray paint is pretty good. Used it on my ATV arms & inside wheel. It rinsed mud and junk off easy. And getting out of a hole the wheel had less weight

@bessiemorrison4804 Жыл бұрын

I believe that I’m going to try Slip Plate Heavy Duty Graphite Lubricant. Demo by Garage Gear. I’ve got a Battery Ego Mower that Manuel states to apply a wet cloth & no excess water. I really like how you used 3 different ones. It help me to decide what’s best for my use! Thanks Greg! 😊

@chuckjeffcoat483 2 жыл бұрын

I use cooking spray to keep damp grass from sticking to deck. I have a push power mower so it is easy to wash after each mow.

@DK-vx1zc 2 жыл бұрын

Nice review! thanks for sharing

@tigergreg8 2 жыл бұрын

I've considered using something to keep the deck clean, but I just bought a tractor lift and I'll just jack it up and scrap it off. It really doesn't take long to jack the mower up, and scrapping it isn't bad if you do it every week. Thanks for the review.

@millertime8835 4 ай бұрын

The whole idea is to NOT to do it every week dummy.

@TheOzthewiz 2 ай бұрын

I made up my mind to jack up my mower after EVERY mowing job. You are right, it only takes about a minute to jack it up using my "PRO-LIFT" jack. Heck, I can even sharpen my blades WITHOUT removing them while the mower is jacked up!!

@tigergreg8 2 ай бұрын

@@TheOzthewiz But when you sharpen blades you have to make sure they are level. How are you getting away with that?

@jamesruska5721 Жыл бұрын

I tried Tire coating spray and it worked real well. I mowed next day after rain and it was effective. You can get them real cheap on clearance and spray whenever.

@TheOzthewiz 2 ай бұрын

Mowing WET grass is the EASIEST way to KILL a lawn mower. Even most "pros" will NOT mow wet grass UNLESS the 'Queen" herself is arriving in 2hours!!

@bjkjoseph 2 жыл бұрын

I see you got those gator blades on there, those things are great turns my leaves into dust and it was a good video

@OtisFlint Жыл бұрын

Your conclusion is definitely correct. I've had the same mower (and original deck) since 2005. It gets power washed once a year in the fall, then a quick coat of FF and put away for the winter. It has no rust or rot issues. Any of these coatings are just a waste of time and money. Id rather buy a $400 deck every 30 years than waste my time and money coating the thing every other mow.

@stuartlittle69420 Жыл бұрын

What is FF? Pardon the ignorance.

@Dhardc Жыл бұрын

@@stuartlittle69420 - Fluid Film.. same type product as these tested..

@TheOzthewiz 2 ай бұрын

I wish I could buy a NEW deck for my 2005 46" MTD for $400! The best I can do is $800 for a new deck shell, and in about 3yrs there wont be ANY new ones available anymore. At $400, I would gladly buy a new deck every 5yrs!! CHEERS!

@elit3401 Жыл бұрын

Nice vedio and test. That's a lot of work to be removing ones deck. I was not impressed by any of those products. I am more inclined to use SLIP PLATE of all the products people have tested . Thanks for sharing.

@angrygaragemechanic 2 жыл бұрын

Thanks for taking the time to test these products 👍

@stickboy6772 2 ай бұрын

great video. Appreciate the testing. I have an old JD with a totally rusted deck that is held together by baling wire. I am putting a new deck on it and am considering treating it first now! I would love to know how the cosmoline holds up after a few months to see if its worth it. I am older and do not want to remove my deck often, so if i have to reapply the coating then i will just install a washer port.

@killroy2993 5 ай бұрын

I use majic on my ATV/SXS wheels. If they are black i start the whole thing. Otherwise the inside wheel Mud just slides off while riding. No balance issues with build up

@warrend114 Жыл бұрын

That dry lube works great on bicycle chains and sprockets fyi

@danielhoffman2199 2 ай бұрын

Try a leaf blower too release grass around the top of the mower and around the belts. If you blow the underside of the mower with the blower and the grass you cut was dry it will release much of it.

@TheOzthewiz 2 ай бұрын

The key word is "DRY" grass. Where I live (West Central Wisconsin), the grass is ALWAYS WET. And leaving wet grass stuck to the deck is inviting DISASTER. Not only rust, but MOLD starts in about 3 days!! I don't mind MOWING, but the maintenance of the EQUIPMENT really sucks the big one!!

@lsumaniac2485 Жыл бұрын

I will say this it's very hard to keep grass build up off the deck but what I will say is for superior corrosion resistance Por15 is the best I've ever seen hands down. The Por15 will last a good 3 to 5 years and will make any deck last a lifetime if you put the time in to paint it every 3 to 5 years.

@HeyJerry55 8 ай бұрын

DO you use the por15 as a primer and top coat? Looking to paint my mower deck. Thanks

@lsumaniac2485 8 ай бұрын

@@HeyJerry55 No sir, you just need to get it as clean as you possibly can and use only por15. There is really no need to topcoat after the por15.

@HeyJerry55 8 ай бұрын

@@lsumaniac2485 thanks for the reply, I will be doing this asap with my deck. Have a good day!

@lsumaniac2485 8 ай бұрын

@@HeyJerry55 No problem brother

@sawdustadikt979 Жыл бұрын

Great video as always. I suppose the only things you could have done for durability was to do a months worth of mowings after one application as well as mow the grass when wet, as in early in the morning or after a storm. Also, taking note from my neighbors, mow once a month or when the grass gets over the knee high and wonder why your mower gets dull so quickly and huge areas of your lawn dies by the end of the year. In my observation no one tests durability like the negligent and lazy.

@TheOzthewiz 2 ай бұрын

Or, reseed the lawn with some "slow growing" grass like "Buffalo Grass". You only have to mow it ONCE A MONTH!!

@mikesbikechannel4387 Жыл бұрын

I'd like to see a test with Slip Plate that I've been hearing so much about lately.

@plokijij7856 2 жыл бұрын

Definitely worth doing if your mower has a thin deck, I have a zero turn Ferris it’s deck is super heavy duty 1/2 inch steel, but still worth doing to keep it from rusting.

@thatguy7085 Жыл бұрын

Fun fact… the hose attachment was never supposed to clean the deck. It was supposed to clean the blades.

@plokijij7856 Жыл бұрын

@@thatguy7085 actual fact anyone who has had a ride on for a length of time understands clean blades do nothing but a clean deck that is clean underneath is key to a cuttings existing the deck ASAP and a clean level cut!

@taddmcmichael9061 4 ай бұрын

Half inch...c'mon. How about it is actually 10 gauge (which there are 7 gauge commercial mower decks) so it is slightly more than 1/8".

@TheOzthewiz 2 ай бұрын

If you can afford a "high roller" mower like the one you have, you could easily afford to hire professionals unless you REALLY enjoy playing with your shiny new toy!

@VENUSWR 2 жыл бұрын

Awesome! :)

@terrykyte1845 11 ай бұрын

good info

@chiaojian6122 10 ай бұрын

Just wondering if this type of FRP board can be used as whiteboard? What type of surface does it have, ice cracked texture or complete flat and flushed white shinny surface? Have you ever try to use erasable pen before? If you did then did you see any ink residue shadows even you clean it thoroughly?

@jamesmacfadyen92 2 жыл бұрын

Good review👍 I have scaped alot of decks the dryer the better.any cheap spray will work even Pam Cook spray.green layer dries & flakes off.water just causes prblms.ie rust.cleaner the bottom b4 spraying the better.

@glenwoodcampbell2734 Жыл бұрын

I cleaned deck .primed it .painted it with enamel paint. Slick .last for yes not stick

@TheOzthewiz Жыл бұрын

Thank you for uploading this video, however from previous experience, I have found NOTHING that can be sprayed on which will eliminate the hassle of keeping the deck clear of clumped damp grass. Fluid Film works great INSIDE car doors and the under carriage as long as you SKIP the under body flush at the local car wash. As for lawn mower decks, it's expensive for the short lived application. I have an MTD 48" mower that's going on 20yrs, the deck has just surface rust, so far. I get under (using a PRO-LIFT jack) and clean the deck after every other mowing job and liberally spray the deck with whatever oil is the cheapest. The only "fix" would be for manufacturers to apply a "Teflon" coating when the machine is built. I am really surprised that the deck on that mega buck JD machine looks much like my $1000 MTD. What really amazes me is that you "high rollers" with the $10000 mowers even put up with this shyt. Why not SKIP all the work and hire professionals (like 'blades of grass') to do the work while you sit and sip on your barley pop. I have NO choice, living in Public Housing, with everything taken care of EXCEPT the 1/4acre of grass AND the snow in the winter. At $300/month contract, its not affordable on a fixed income. Sorry about the rant, I do appreciate these KZfaq DIY videos. I have saved a LOT of money because of the knowledge I have gained through these videos. CHEERS!

@mr.l6982 4 ай бұрын

Have you tried brush on slip plate?

@coachliu32 Жыл бұрын

Where is the "cosmolene" product on your store you said you are going to stick with? Don't see it listed anywhere. Thanks.

@mariodeblasio6380 3 ай бұрын

Thanks!

@RepairGeek 3 ай бұрын

No problem! Thanks.

@RCALivingStereo Жыл бұрын

Mo deck any good ? John Deere wells that

@matthewpetell Жыл бұрын

Slip plate?

@thangknowa3288 2 ай бұрын

Take the deck off, turn it over and clean it well, after it dries real good (Next day for me) spray paint the bottom with good spray paint the same color of your deck really good. And NEVER cut wet grass. My mower deck is 20 years old and looks fantastic. I have painted mine twice in it's life. Put more focus on sharpening and balancing your blades.

@garylaajala9461 2 ай бұрын

I NEVER would mow wet grass, either. The last couple of years, tho, got tired of riding along in a cloud of dust for two hours each time. Now I mow mid- morning, with the dew moisture, (not after heavy rain). Let the mower deck collect some extra clippings, so what, better than eyes, ears, nose and lungs collecting dust and dirt.

@TheOzthewiz 2 ай бұрын

I agree with you! NEVER CUT WET GRASS! It is the EASIEST way to destroy a mower!!

@willhutton1516 2 жыл бұрын

What’s up! Great video man! You wouldn’t happen to know why an oil pressure light would come on after replacing both pressure sensors would you?

@RepairGeek 2 жыл бұрын

Does it actually have oil pressure? Is the wiring good? Is the cluster functioning correctly? You could have verified any of this before replacing any parts.

@willhutton1516 2 жыл бұрын

The cluster is functioning correctly. Oil pressure light goes off when I rev it up to 4500, and stays off till I restart it. I already have an appointment Monday at a Honda dealership. Cut open the oil filter, no shavings. And oil is getting to the heads. It’s just a little noisy due to needing the valves adjusted.

@daniellang6112 Жыл бұрын

where is the slip late?

@PoisonShot20 2 ай бұрын

About spray used engine oil?

@dixiepan8538 Жыл бұрын

Try Glyptol , it used for engine blocks, designed for high voltage insulating , electrical repair, a bit pricy but very tough.

@letmebreakitdown2u152 Жыл бұрын

Have you ever used it?

@dixiepan8538 Жыл бұрын

⁠@@letmebreakitdown2u152 At the farm we lift the mowers with a mower lift and clean them with a flat stick like an ice scraper, At our house on my push mower, when done mowing i run it over a pile of dry leaves and small twigs,small sticks, this worked very well.

@TheBeatenPaths Жыл бұрын

The lefthand blade shroud cleaned up the best after had been sprayed with the cosmoline from your previous test.

@DrEVIL-og4qv Жыл бұрын

I've tried the graphite paint, Slip-Plate, in 2-3 mowings of my 2+ acres it was worn down to bare steel again. They make spray cans of truck bedliner coating, it builds up a much thicker layer and is tough, almost impossible to remove, You need to coat your mower with it and post the results. Pressure washing is really hard on your deck, not sure about your Deere deck but my older IH Cub Cadet decks have the stamped sheetmetal, probably 12 gauge with a 1/4" thick plate for strength and rigidity, guess what happens when water gets between those two pieces, and the Don't get paint between them at the factory. I don't EVER get water around my mower decks. My Cub Cadet TANK LZ54 has the fabricated deck, built like a tank or Battleship, take your pick. I've had it 9 years and mowed my 2+ acres and have NO grass buildup, and never treated it with anything. It's been as close to trouble-free as any machine can be. The solid state LCD tach/hour meter stopped registering the tach function before I was done with the first mowing, but the hour meter works fine, 252 hours on it.

@bessiemorrison4804 Жыл бұрын

I guess that I won’t use the Slip Plate... paint on lubricant! Thanks for your experience information! 😊

@TheOzthewiz 2 ай бұрын

The PROBLEM with using bedliner is the same as using undercoating. Water will make its way UNDERNEATH the liner and actually ACCELERATE the rusting!

@JeffDAPG Жыл бұрын

Man, I need something because I have to slide my mow deck out from the side every time to clean it and deal with the Pulley belt...it's an older ride on mower. Anything that will help make cleaning easier will be a huge help and unfortunately it doesn't seem like these do really anything

@rickylalonde2317 10 ай бұрын

Get a mow Jack best 100. I ever spent but got a new ConturyCliper coming Tuesday

@TheOzthewiz 2 ай бұрын

Snake oil!

@jodyfrancum7321 15 күн бұрын

Hi I need link to get the magic easy slip ? Can’t find or get shipped to me in NC 🤔 . Please send information thank you .

@TheGoldishFish 2 жыл бұрын

Can you please clean and add a automotive Ceramic Coating to one to see if it does better? or automotive Ceramic spray Coating vs automotive Ceramic Coating from those little bottles.

@RepairGeek 2 жыл бұрын

I'm currently looking into plastic trim restoration products. Some of those are ceramic based. Ceramic coating testing takes TIME. The coatings can last for years. I'll put it on the list.

@peterrudy9207 Жыл бұрын

You could use a power washer , gas or electric to clean the mower decks before applying undercoating .

@charlottecobain6986 Жыл бұрын

Why the need to clarify gas or electric pressure washer? The only other kind I’m aware of is newer battery operated ones, which would also be electric…🧐 But I agree, it might work better if the under deck was cleaned first. I don’t have a jack and my belt sometimes gets knocked off the various wheels, so I usually just pull the deck to the highest setting and spray everything off with my hose right after I’m done mowing and that’s seemed to work pretty well but I should start adding a corrosion inhibitor at the end of the season at very least.

@peterrudy9207 Жыл бұрын

@@charlottecobain6986 A gasoline powered pressure washer supplies more PSI , more cleaning power . KZfaq - repair geek / detail geek ? has tested rust proofing sprays / liquids .

@RPO6464 11 ай бұрын

I watched both your videos. Thanks for doing these videos. I have a question you said in one video you like the CRC Cosmoline and this one you said the magic brand. Which of these do you recommend?

@RepairGeek 11 ай бұрын

CRC is better than the Magic. I chose Magic in this video because I didn't use CRC this time.

@RPO6464 11 ай бұрын

@@RepairGeek thank you very much. I will be getting the CRC.

@TheOzthewiz 2 ай бұрын

Both. Makes for GREAT "click bait"....

@RepairGeek 15 күн бұрын

@@TheOzthewiz The definition of Clickbait- Clickbait typically refers to the practice of writing sensationalized or misleading headlines in order to attract clicks on a piece of content. It often relies on exaggerating claims or leaving out key information in order to encourage traffic. I'd love to know what was sensationalized or misleading about this video...

@williamhill3751 Ай бұрын

What mower were you using. Is there a link for it somewhere? Nice Video done well.

@RepairGeek Ай бұрын

John Deere X738

@kroolis77 2 ай бұрын

Wd40 added to wash port added after wash port use.

@bruceaugustine6486 Жыл бұрын

Slip Plate will likely last a full season, at the least it does for me.

@jeffmurnahan Жыл бұрын

How often do you need to spray?

@PowerScissor Жыл бұрын

It takes longer to mess with sprays, than manually removing the grass. Hitting it with compressed air is so fast to clear the grass...and I've tried lots of sprays.

@Flowshow88 Жыл бұрын

THE best product to use is "Black Magic" from the car care section 🤷🏻‍♂️

@TheOzthewiz 2 ай бұрын

It works GREAT on tires, keeps them nice and shiny...

@danielpomeroy Ай бұрын

I've used several types of coatings including por15. Coatings are a waste of money, imho. Better off spraying the underdeck with a garden hose after mowing.

@davem3789 2 жыл бұрын

I try to only cut my grass when totally dry to minimize this issue.

@IamSooConstipated Жыл бұрын

What about a ceramic coating?

@TheOzthewiz 2 ай бұрын

Good idea! A better idea would be for the manufacturer to TEFLON coat the deck BEFORE you buy it. Actually, a bad idea. The manufacturer WANTS you to buy a NEW mower after 5yrs. Planned obsolescence keeps the economy rolling along!

@flhusa1 Жыл бұрын

TRY EPOXY APPLIANCE PAINT .

@MrJhndrtxn Жыл бұрын

You should try gatorglide

@TheOzthewiz 2 ай бұрын

I prefer "Astroglide " personal lubricant...

@StarlightWorkshop0z 2 жыл бұрын

What about just paint? Rustoleum?

@TheOzthewiz 2 ай бұрын

Better than nothing. And it's CHEAP!

@jamesdean5677 Жыл бұрын

Does anyone besides me care about keeping the top of the deck clear? Inches upon inches of grass after mowing 4 acres on the deck.

@toddhampton5513 Жыл бұрын

No your the only one

@jamesdean5677 Жыл бұрын

@@toddhampton5513 What about you're?

@Brammie80 Жыл бұрын

Yes i do. Just a leaveblower to blow of anything i can. Now in the winter I'm cleaning it by taking the belt wheels of to get the dirt of from it(reduces vibration and keeping it in balance to save the bearings). Also good to clean and grease all the other moving parts.

@charlescoker7752 Жыл бұрын

Did you get the John Deere from a Big Box Store , or a John Deere Dealer. Have heard the Box Store Mower are poorly made.

@RepairGeek Жыл бұрын

This isn't a box store special.

@TheOzthewiz 2 ай бұрын

Not true! The "big box" stores carry the "base" level mowers, while dealers carry more high-end models! Urban myth...

@FixNewsPlease 17 күн бұрын

Three coats of bed liner on your deck when you buy it and forget keeping it clean.

@shadwell749 11 ай бұрын

Some company should coat the decks with teflon to see how it holds up

@TheOzthewiz 2 ай бұрын

Planned obsolescence! THEY want to sell you a NEW mower every 5yrs. Have to keep people employed!!

@gcraig0001 5 ай бұрын

Testing with dry grass doesn't tell you much at all. You could get better results just spraying with a garden hose after mowing. Install wash ports in each chamber, use quick connects on each port and the garden hose, then with the blades turning connect the hose to the first chamber and let it operate for a few minutes, then proceed to the next chamber, then the last. Turn off the water and let the blades run a couple minutes to air dry the surfaces. Easier than removing the mower deck and tipping it up.

@TheOzthewiz 2 ай бұрын

Also, make sure the deck is at its LOWEST setting with the blades spinning!

@kelton5020 Жыл бұрын

Are you sure the graphite didn't develop rust? You can see the rust on the paper towel around the plate, maybe the color of the graphite is making the rust hard to see.

@RepairGeek Жыл бұрын

It's from the bottom side that wasn't coated.