Repairing A Neglected New Holland L785 Skidsteer

No video

Repairing A Neglected New Holland L785 Skidsteer

Рет қаралды 3,886

Күн бұрын

In this video we take you start to finish purchasing and repairing a skid steer to re-sell. Stay tuned for cost breakdown in the end.
0:00 Intro
0:13 Retrieval
0:25 What is wrong with it?
0:41 Unloading
0:53 Sourcing an engine
1:20 Buying a replacement engine
3:00 Installing new engine
3:15 New engine in
5:20 Bleed fuel system
6:03 First startup
7:22 Job is done
9:00 Cost breakdown
10:07 Summary and advice
11:21 Why I do this

Пікірлер: 13

@MitzvosGolem1 6 ай бұрын

Ps there is a hydraulic suction screen under seat under a 1 inch hex nut. Right before charge pump . Needs to be cleaned regularly. Also keep cover over it since rain gets in hydraulic fluid from chain case cover cracks etc.

@VolvoGonzo 7 ай бұрын

Foot controls are my jam! Great job, though

@MitzvosGolem1 6 ай бұрын

I have a 1994 785 6000 hours for 13 years have a 4n1 clam bucket . Never breaks down . Awesome machine no high tech .I sold off my new Bobcrap pos T300 and kept this old reliable cheap machine. To find a Perkins 4.203 or any used Diesil call Old Forge Power in Pennsylvania has thousands of used engines machines.They are on you tube

@rayhat5111 Жыл бұрын

Great video. Great deal. Nice hit with the Mennonites. I have one. Ford diesel. Bought used with 4000 hrs. Seven years no real issues. Things a beast. Just diagnosed with zero compression in two cylinders. Gonna yank the engine and see what’s what’s. Probably (hopefully)going to have my rebuilt. Don’t really want to ride out to Mennonite Country and then swap out parts and modify sheet metal. Really nice job on the vid and the machine. Good luck with whatever you do with it.

@VectorPL0 7 ай бұрын

Hello, when you bought this New Holland L785, the wheels were blocked due to the lack of engine, could they rotate freely? Do you know how to unlock the wheels without an engine?

@StanwoodStudios 7 ай бұрын

You could crack the wheel motor hydraulic lines, this one rolled slowly with resistance, some won’t

@VectorPL0 7 ай бұрын

@@StanwoodStudios Thank you for your answer, in a few days I will be driving a trailer to New Holland L785 and I don't know if the wheels will rotate. Do you have the user manual for this charger? If the wheels are locked, should the cables at the hydraulic pump be loosened? I'm asking because I'm new to hydraulic drives. I would be grateful for any tips, as I mentioned, the machine does not have an engine.

@bjs08321 Жыл бұрын

What was the name of the salvage yard?

@StanwoodStudios Жыл бұрын

I can’t remember!

@rfggpttf1927 Жыл бұрын

I have 3 l785 one with 5245.. its my strongest.. still good friends with the orig. owner... he change oil in whole machine every year..changed oil in ford 301 every 40 h0ur. for 1st 1000 hours me every 100 or so.. have a rebuild ford 3 cyclnder that only lasted 40 hours frozen do not no why. question Iam in Pennsylvania looking for the name of the Mennonite sect. that may be able to revive it. funny all three machine were bought a various time but the serial numbers are only 500 appart! I have over 5000 hours in the seat experiance have rebuilt the pistion pumps, rewelded hubs, rebulit gyros, never had to rebuilt the main pumps. some parts are very rare.. thx tp

@StanwoodStudios Жыл бұрын

I can share his contact info with you, do you need an engine?

@73turbopinto 9 ай бұрын

I'm in PA could you pass along the Mennonite engine rebuilder info?@@StanwoodStudios