Repairing a Zurn Wilkins 70XL Water Pressure Reducing Valve

Рет қаралды 45,829

12 жыл бұрын

Watch as our team walks you through, step-by-step, how to repair a Zurn Wilkins 70XL water pressure reducing valve.
Note this video is more than 4 years old and may include some out-of-date information. Please refer to Zurn.com for current information and instructions.
Visit the 70XL product page on Zurn.com for more information! www.zurn.com/products/water-c...

Пікірлер: 20

@JeffChristlieb 11 жыл бұрын

Excellent video. Most people don't know realize the importance of the water pressure reducing valve and just ignore it. My pressure was creeping up to the 90 psi range. After rebuilding the regulator with a rebuild kit, I was able to dial it in right at 50 psi.

@vibrasonmusic 6 жыл бұрын

The video was essential for installing the repair kit. In my case, the spring, spring cap, and parts of the diaphragm cover were rusted so it was very hard to remove the internal bolt! It would greatly help if Wilkins would put tabs or something for a channel lock to grip while loosening that bolt. Aside from that, the repair went smoothly and the valve was good as new when finished. This kit can save you lots of money in labor if you're a do-it-yourselfer!

@ZurnIndustries 6 жыл бұрын

Thank you for your comments! Our Product Manager says: "We are definitely considering reparability into all of our designs and the next generation will be even easier to repair. The model 70XL is a decades old design but a contractor favorite based on its extremely stable performance making it one of the most popular valves today. Our newer PRV's such as the model NR3XL use a cartridge design that makes the valve even easier to repair. On the 70XL we do offer a Sealed Cage (SC) option that converts all the hardware in the upper bell assembly to stainless steel, this would greatly reduce the corrosion you noticed."

@dzh4608 8 ай бұрын

Very useful information. Thank you, I saved 100$.

@ciceroReborn 11 жыл бұрын

The plumbing code for a residence requires less than 80 psig intake static pressure. If you use toilets with flushometer valves like I do, the minimum pressure is 65 psig. This caused me to select a model 70 rated for 75/25. Minimum aperture is 1 inch. All valves and the model 70 must be full throat.

@index1489 2 жыл бұрын

It seems the 70DU is discontinued and the 70XL doesn’t come in 1 1/4 size. The 70DU 1 1/4 size and larger seems to have a different design and parts then the smaller versions. Any repair guide for this model?

@edmiron 3 жыл бұрын

I Have a ¾" Wilkins model 70 Can I use a Zurn Wilkins 70xl repair kit for this?

@edmiron 3 жыл бұрын

I found the answer. Apparently the answer is yes.

@ZurnIndustries 3 жыл бұрын

Sounds good! If you have any other questions, let us know. Thanks!

@Susan70003 2 жыл бұрын

@@edmiron Thank you Ed. I have the same model as you.

@OKComputer75 7 ай бұрын

For model 70XLDU repair kit, is the cartridge made of plastic or fully metal? I read some buyers that it is plastic now.

@smoky_sam 4 жыл бұрын

What are the required wrench/socket sizes? What tool is being used to hold the disk?

@ZurnIndustries 3 жыл бұрын

The Model 70XL will require a socket, in the following sizes, in order to remove the cartridge from the body of the valve. 4. ½” 70XL - 1-1/8” 5. ¾” 70XL - 1-1/8” 6. 1” 70XL - 1-3/8” The video shows a simple 3D model, intended to represent a hand, holding the diaphragm in pace while tightening the retainer bolt. For more information or troubleshooting support, please feel free to reach out to our staff @ 855-ONE-ZURN.

@delldavis9803 Жыл бұрын

I have a Wilkins three-quarter inch regulator 1417 r i’m having trouble finding a rebuild kit for it it looks like Zurn owns Wilkins now. I was hoping to find a way to cross reference my old regulator to The new parts that would fit it. Thank you 3:11 3:11

@ZurnIndustries Жыл бұрын

Hello, it's possible that you are looking at the production date & not the model number. If you look at the side of the valve, it should have the Model number listed between the two pipe connections. If you need more assistance finding this number, please reach out to Zurn Customer Care.

@delldavis9803 Жыл бұрын

Thank you

@fmepengineering3435 2 жыл бұрын

Farhan delhi

@manaoharsam4211 3 жыл бұрын

Please dont use the word downstream use intake and outlet into house. Downstream is misleading to me.

@ZurnIndustries 3 жыл бұрын

Thank you for the feedback! We'll pass this on to our engineers and product experts.

@manaoharsam4211 3 жыл бұрын

@@ZurnIndustries I like you reply. Your reply indicates to me you must have A great company, you took no offense to what i said but simply stated you will talk to your Engineers. Buddists Monks say if the glass is empty there is hope for the student to learn. Well i gave you and your company a score of 100, because glass is empty, you will learn more and make great money progress.