Repairing fuel injectors with Sherline mini Lathes - Internal & External Threads.
Рет қаралды 2,697
2 жыл бұрынHi everyone,
This is my video showing how I repaired four special fuel injectors, that were damaged at the inlet to the fuel, losing the sealing.
This video has subtitles, so I hope it can help understand my way to solve it, always using my Sherline machines.
At the end of the video, you can see my explain about my works and how I make some money at home using Sherline machines.
I hope you enjoy and comment.
Luiz Ally
www.tryally.com
Facebook Tryally Tech.
Instagram: @tryallytech
Sherline Lathe & Mill Group: / 975235319239533
@solenoid78 2 жыл бұрын
Such videos work better than any psychotherapy.
@tryally 2 жыл бұрын
Michael, thank you for your kind comment, there is a lot more to look forward to.
@russtuff 2 жыл бұрын
That's an elegant solution. Great video!
@tryally 2 жыл бұрын
Thank you so much, my friend, I'm glad to see you again here.
@tuscanland 2 жыл бұрын
Always good presentaion of your work, professional and friendly.
@tryally 2 жыл бұрын
Hi my friend, thank you for the kind comment, I'm glad you enjoy it.
@BrilliantDesignOnline 2 жыл бұрын
You are VERY talented and the work here is SUPER impressive. The customer will be very happy.
@hztn 2 жыл бұрын
Nice to see that Louise is back!
@tryally 2 жыл бұрын
Thank you for your comment my friend.
@NuttyforNissan 2 жыл бұрын
Always good to see you in action.
@tryally 2 жыл бұрын
Thank you for your kind comment, I'm glad you liked my work.
@davidleach2288 2 жыл бұрын
Beautiful work, Luiz.
@tryally 2 жыл бұрын
Hi David, thank you my friend, I'm glad you liked my work. Soon I will upload new videos. See you !
@leedale5393 2 жыл бұрын
Excellent job again 👍
@tryally 2 жыл бұрын
Thank you Lee, I'm glad you liked my video.
@Hadji76 2 жыл бұрын
You"re the MiniLathe Master!!!
@tryally 2 жыл бұрын
Ludovic, thank you so much for the kind comment.
@ApukEldar 2 жыл бұрын
Bravo Ally...BRAVO!
@tryally 2 жыл бұрын
Apuk, thank you my friend.
@josephmagedanz4070 Жыл бұрын
Well done!
@tryally Жыл бұрын
Thank you for watching Joseph.
@thegenrl 2 жыл бұрын
great to see your videos again! Excellent quality and workmanship as always
@tryally 2 жыл бұрын
Thank you for watching and commenting, I am glad always, and that is what encourages me to do more.
@barbeirorp Жыл бұрын
Muito top Luiz... Muito mesmo
@tryally Жыл бұрын
Valeu Rodrigo!
@stefanhertweck 2 жыл бұрын
Hello Luiz, great to see you back at YT and I guess many others think the same :). I am not a Facebook user - for reasons - and I hope that we can see more of you and your work here at YT. I hope everything is fine on your side. Greetings from Germany, Stefan.
@tryally 2 жыл бұрын
Hi Stefan, thank you so much for watching my video and follow the channel, I'm so glad about that. For soon I will post new thing, and also may some videos teaching my way to work with these little machines My best regards from Brazil
@tiagoluciano9066 2 жыл бұрын
top top top... da orgulho de ver seus videos, vc é muito bom no que faz !!! parabéns!!
@tryally 2 жыл бұрын
Opaa Tiago, legal te ver por aqui, valeu por assistir e comentar, Abração
@eddiekvh 2 жыл бұрын
Legal ver vídeos seus denovo! Belo trabalho
@tryally 2 жыл бұрын
Obrigado por assistir e comentar, sempre aprecio e fico muito fez por isso.
@mariomonteiro9819 2 жыл бұрын
Parabéns ... belíssimo trabalho
@tryally 2 жыл бұрын
Valeu por assistir e comentar Mario, fico feliz de te ver por aqui. Abraços
@filipecoelho3383 10 ай бұрын
Parabéns, mandou muito bem!
@tryally 10 ай бұрын
Valeu por assistir e comentar Filipe. Abraços
@mosfet500 2 жыл бұрын
Great, thanks Luiz!
@tryally 2 жыл бұрын
Thank you for watching and your comment, I'm glad you liked the video.
@bluehornet6752 2 жыл бұрын
Magnificent Luiz! Hope you, your wife and the triplets are doing well! Hello again from Wisconsin USA.
@tryally 2 жыл бұрын
Hi Tom, I am glad to see a comment from you on my channel. We are all doing well, and the triplets will turn 19 in February. I hope you and your family are all well too I am finishing up two new videos, hope to see you again. Our best wishes to you and your family Luiz
@bluehornet6752 2 жыл бұрын
@@tryally I figured there were about that age. I feel for you and your wife--three teenagers all wanting to drive at the same time, lol. Your work is FANTASTIC, as always. Miss talking to you in the Sherline FB group.
@tryally 2 жыл бұрын
@@bluehornet6752 Thank you my friend, yes that's right, all three teenagers all wanting to drive at the same time, and I am getting old and white-haired. After the factory I have very little time on the internet, I also miss chat you. And one more Christmas is coming, I hope that everything is ok with you and your family.
@bluehornet6752 2 жыл бұрын
@@tryally We're doing great, thanks! Just built a new house and a new detached shop--trying to get it finished up. Have a Bridgeport J-head, a Southbend 10" lathe, and just bought a new 14" Precision Matthews lathe. With luck I'll have the shop all up & running by the end of the year, and then will make some videos. If you ever come to the USA and are going to be anywhere near Wisconsin, just let me know.
@tryally 2 жыл бұрын
@@bluehornet6752 I am happy to hear that you built a new house and things are going well, Wow Matheus lathe, I think it is the model1440, I read about it and saw some videos, but we don't have them in Brazil. I am trying to buy a Swiss head center type, but here the prices are still scary. Tom, let me know when you post your videos.
@not2fast4u2c 2 жыл бұрын
It has been awhile since I saw a video of you Hope you are doing well I keep busy making homemade tools and restoring old tools and wrenches
@tryally 2 жыл бұрын
Hi buddy fine thank God, thank you, hope you and family as well. I was too busy also, I set up a factory to my accessories, and still have so many things to do yet. Thank you for watching and your kind comment.
@rondunn8879 2 жыл бұрын
The last part of the video was a great personal touch :)
@tryally 2 жыл бұрын
Hi Ron, thank you for watching this video, there is a lot more to look forward to.
@joshuawood6588 2 жыл бұрын
Great video! And well said words I'm looking to get started with a sherline product of my own soon.
@tryally 2 жыл бұрын
Hello Joshua, thank you for watching and your comment, I'm glad you liked my videos. I hope you get your Sherline machine soon.
@joshuawood6588 2 жыл бұрын
@@tryally what machine do you suggest I start with?
@tryally 2 жыл бұрын
@@joshuawood6588 do you thinking about Lathe or Mill machine?
@joshuawood6588 2 жыл бұрын
@@tryally I'm thinking about a lathe. I have the Harbor Freight mini mill. I can use it until I need a cnc mill.
@tryally 2 жыл бұрын
@@joshuawood6588 The 4410 Sherline lathe works well for small pieces at home.
@mosfet500 2 жыл бұрын
Thank you Luiz and nice to see you making videos again. Do you round off your cutters a little bit for better finishes?
@tryally 2 жыл бұрын
Hi buddy, so, all cutters have now a small radius in the cut tip, near 0.20 mm for better finishes, other of them, are spherical like in this video, so the radius on the tip is half of the tool width, they bring a great result
@isidoromaich7226 2 жыл бұрын
Mais um ótimo vídeo do mestre Luiz! agradecemos muito por vocé ensinar tuas habilidades Uma grande abracada des-de Espanha
@tryally 2 жыл бұрын
Muchas gracias por el amable comentario en portugués Isidoro, siempre me alegra y se agradece mucho. Mis mejores deseos desde Brasil para usted y su familia. Luiz Ally
@ShnitzlHaus 2 жыл бұрын
nice to see a new video my friend.. (canbaja5)
@tryally 2 жыл бұрын
Old friend, I'm glad to see you here, thank you for watching and comment. See you soon again, more vids coming soon.
@durangotang1681 2 жыл бұрын
Holly hell!!! Hey man!!! Where have you been?
@tryally 2 жыл бұрын
Hi buddy, was setting up a factory to produce my accessories, isn't easy, but I back, and there is a lot more to look forward to. Thank you for your comment.
@danielescobedo7968 2 жыл бұрын
Great to see your Videos again. Do you have a full time Job? Or are you able to do this full time with Sherline machines. As for Facebook I'm not a subscriber for Reasons. So sorry I can't follow you there.
@tryally 2 жыл бұрын
Hi Daniel, now I'm working full time with my Sherline machines, and also I have a factory for accessories and micro tools, here in Brazil these machines changed life.
@buundy 7 ай бұрын
Interesting video, I like your videos! I am starting with sherline lathe and mill and I am planning to make them cnc. For the lthe do you recommend to change x and z axis to cnc and also the spindle? I noticed you are doing threading on a different machine that has only the spindle is stepper and connected with the thread cutting gears to the slide? Can I combine all as I only have one lathe not two :)
@tryally 7 ай бұрын
You could even combine them, but I think it would be a lot of work. I only did it this way because I have other lathes. But with the CNC system you can cut threads, you just need a few modifications and a turn counter (infrared sensor).
@buundy 7 ай бұрын
Thank you! Why do you think it would be hard to combine all? Here is my plan: a strong stepper motor to drive the spindle and two normal steppers to drive the z and x axes. Stepper drivers connected to an usb mach 3 adapter board and configure mach 3 to run the spindle and the other two axes. Do you think it would be possible? That was I would know (and sense) the exact rpm of the spindle if I want to cut threads. Any thoughts?
@tryally 7 ай бұрын
@@buundy Even though the stepper motor is strong, it doesn't offer the right speed for the spindle, DC motors can reach up to six thousand rpm and stepper motors at a maximum of three thousand rpm, if I'm not mistaken. But with the CNC system and an rpm sensor you won't need a stepper motor.
@buundy 7 ай бұрын
Yes but I think that for slow and steady motoric threading the stock Sherline spindle motor would be weak. Do you suggest to replace it with a more powerful motor? Also about the stepper spindle: what materials would need higher rpm than 2500-3000? I plan to mostly machine aluminium, steel, maybe brass sometimes.
@tryally 7 ай бұрын
@@buundy A stronger motor is always better, but it also works well with the standard motor and hold up well. The rpm depends solely on the diameter of the part you are machining. For example, for smaller diameters, higher rpm, for larger diameters lower rpm. You should use this ratio for any material, and over time you will learn this by intuition.
@alexandreferro3638 2 жыл бұрын
Luiz,sou relojoeiro tenho um torno relojoeiro Star suíço, algumas coisas consigo fazer, mas gostaria de uma especificação, você teria algo pra me indicar? Seus vídeos são fantásticos!!!! Parabéns!!!!!
@tryally 2 жыл бұрын
Oi Alexandre, obrigado pelo comentário, então, sobre especificação oque exatamente você deseja e procura, pergunto porque existe uma gama grande de máquinas acessórios e recursos voltadas pra pequenas usinagens, Que tipo de usinagem você tem feito na maioria das vezes?
@fretsman68 2 жыл бұрын
Well done, Luiz, and may I ask what software you use for your CNC lathe?
@tryally 2 жыл бұрын
Hi buddy, thank you, so I'm using Mach3 lathe, works well to me.
@fretsman68 2 жыл бұрын
@@tryally Ah good, and do you use Mach 3 to set up operations or another CAM for the Lathe?
@tryally 2 жыл бұрын
@@fretsman68 For almost every simple operation I use the Mach3 wizard, I assemble the G-codes with them. It works well
@fretsman68 2 жыл бұрын
@@tryally Gotcha, thank you!
@loricastro3772 2 жыл бұрын
Seus vídeos são sempre muito legais mas sua oficina ... nem se fala! Obrigado por mostrar! Alias, no seu canal não tem um vídeo sobre sua oficina ... seria interessante não? Um vídeo mostrando os detalhes dela, seus equipamentos, ferramentas, instrumentos etc. Fica ai sugestão e, porque não, um pedido rsrsrs. Abraços!
@tryally 2 жыл бұрын
Ainda hoje estava pensando nisso Lori, certamente quando der uma ajeitada no espaço aqui farei um vídeo de uma tur pelo laboratório, fábrica e oficina. Abraços
@loricastro3772 2 жыл бұрын
@@tryally Esperando ansiosamente; sempre tive muita vontade de conhecer sua oficina!
Tryally Tech Tools
Рет қаралды 2,9 М.
Tryally Tech Tools
Рет қаралды 6 М.
Tryally Tech Tools
Рет қаралды 1 М.
Tryally Tech Tools
Рет қаралды 951
Woods Creek Workshop
Рет қаралды 10 М.
Tryally Tech Tools
Рет қаралды 4,2 М.
Тима Бичевский
Рет қаралды 1,2 МЛН