No video

Replace Rear Brakes & Rotors 1999-2004 Jeep Grand Cherokee

  Рет қаралды 26,459

Jimthecarguy

Jimthecarguy

Күн бұрын

Here are some of the tools that jimthecarguy uses
www.amazon.com...
In this video I will show you step by step how to replace rear brakes & rotors 2004 Jeep Grand Cherokee.
Here are the tools used in my video. You can buy them on Amazon.
This is the link
amzn.to/2RKXcra Dual Piston Brake Caliper Compressor
amzn.to/2KH1I9h brake pad spreader
amzn.to/2xfX5u7 brake caliper hooks
Due to factors beyond the control of jimthecarguy, it cannot guarantee against unauthorized modifications of this information,. jimthecarguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. jimthecarguy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy.

Пікірлер: 163
@jerzcnate
@jerzcnate 5 жыл бұрын
Thanks to you Jim I have found other top notch mechanics/technicians on KZfaq. You are my main source
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Thank you . I hope your doing ok.
@wyattoneable
@wyattoneable 5 жыл бұрын
Your scope giveaway is very generous. The time you spent to bring us along on so many videos is also very generous!
@davidmanuelsanchez
@davidmanuelsanchez 4 жыл бұрын
Man, thank you. My rotors would not come off, they hadn't been changed in 20 years. I really ran out of ideas and options until i saw your video. So i sprayed it then beat it :) and wallah off it came
@jimthecarguy
@jimthecarguy 4 жыл бұрын
Thanks for watching.
@manuelsalvatierra2940
@manuelsalvatierra2940 5 жыл бұрын
Always like how you show the tools being used.
@johnnypruett7169
@johnnypruett7169 5 жыл бұрын
I'm so happy to watch your videos and to learn for them , keep up the good work and keep them coming !!!
@borilopez8581
@borilopez8581 5 жыл бұрын
Great video like always it helps me finish a friend brakes faster on his jeep thanks jimmy !!
@minsc9976
@minsc9976 5 жыл бұрын
The e110 Corolla front brake replacement video is what brought me to your channel. Very informative, thank you. Watching from Ohio, land of the orange construction cones.
@christophercox7725
@christophercox7725 Жыл бұрын
Ur like my neighbor who knows everything about my Jeep 👍
@chadgreen409
@chadgreen409 5 жыл бұрын
Thanks for sharing your skills and knowledge with car idiots like me. I've learned a lot from your videos!
@ozzstars_cars
@ozzstars_cars 5 жыл бұрын
The stopping power of Jimthecarguy!
@Kartman26
@Kartman26 5 жыл бұрын
Great video as usual Jim! Appreciate you taking the time to share your knowledge.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@onixtorres487
@onixtorres487 5 жыл бұрын
Jim you make this look easy ..
@sbron99
@sbron99 5 жыл бұрын
Thank you Jim. Very informative as always.
@speedy75602
@speedy75602 5 жыл бұрын
always enjoy your videos and sure could use the borescope.. thanks for all the hard work you do producing the videos....
@LongTimeTTFan
@LongTimeTTFan 5 жыл бұрын
Thanks Jim. I'm going to replace my vehicle's rear brake pads soon. This video helps a lot.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@johnaclark1
@johnaclark1 5 жыл бұрын
Always enjoy learning from your experience. John in Charlotte
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help.
@petermead7510
@petermead7510 3 жыл бұрын
One of the best videos I have seen. Thank you!
@Oscar-pg1ph
@Oscar-pg1ph 5 жыл бұрын
Thanks for the help and for always using tools we all have laying around .
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@petemiller5813
@petemiller5813 5 жыл бұрын
Thanks Jim, your brake replacement videos are the best.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@poncadad
@poncadad 5 жыл бұрын
I like how you details in your repair videos
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Thank you . I'm happy to help.
@yukon4545
@yukon4545 5 жыл бұрын
Nicely done young man.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Hahaha young man.I'm happy to help. Watch for the next free tool giveaway coming soon.
@steelerfan2223
@steelerfan2223 4 жыл бұрын
Thorough work. pleasure to watch and lear. thanx mt. pleasant, south carolina
@jimthecarguy
@jimthecarguy 4 жыл бұрын
Thanks for watching I'm happy to help
@paulsaunders284
@paulsaunders284 5 жыл бұрын
This vedio help me out did my own brakes,save money, thanks again Paul Saunders for ct
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@stephenzies8867
@stephenzies8867 5 жыл бұрын
Great Job As Always Jim
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help.
@ronaldlehmann6935
@ronaldlehmann6935 4 жыл бұрын
Good teacher- learned ALOT- Thank You -God Bless
@jimthecarguy
@jimthecarguy 4 жыл бұрын
Glad you enjoyed it
@Bruel111
@Bruel111 5 жыл бұрын
Nice job as always Jim
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@paulmota3084
@paulmota3084 5 жыл бұрын
Great job Jim
@scuba422123
@scuba422123 5 жыл бұрын
I finally got an 11mm hex bit for the front cals of the newer models
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Thanks for watching. i hope all is well.
@wannabeelektwicityman268
@wannabeelektwicityman268 5 жыл бұрын
Thank you for taking the time to post these videos.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@billziegmond4943
@billziegmond4943 5 жыл бұрын
Hey Jim saw your sight link from Eric O SMA. I've a DYI that's been spinning wrenches for myself and friends for 40+ years. Going broke buying tools you guys show off. Just kidding. love learning new tips and tricks from you all's sites. Keep up the videos/
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Eric O from SMA is a very nice guy and a great mechanic.Welcome Bill
@billziegmond4943
@billziegmond4943 5 жыл бұрын
@@jimthecarguy He's only 4 hours away from me. I keep wanting to go up and meet him. He's helped me on a WUW on advice of a Scan tool. I have GM Tech 2 but was looking for a tool for all makes. I ended up buying a Launch X431 pro. So far I love it .
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Bill Ziegmond were are you located. I'm in New Jersey about 4-5 hr away from Eric
@billziegmond4943
@billziegmond4943 5 жыл бұрын
I am near Pittsburgh Scanner Dahner territory. lol
@johnnypruett7169
@johnnypruett7169 5 жыл бұрын
Thank you so much for the wonderful videos , from Texas , USA !!
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help.
@watuzi
@watuzi 5 жыл бұрын
You can never have enough brake videos, thanks.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help.
@rayray3009
@rayray3009 5 жыл бұрын
Thanks Jim. I'm doing Rear brakes in my 2000 WJ next weekend
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@jet6581
@jet6581 5 жыл бұрын
Did the brakes on 2010 Volkswagen CC...that was interesting. Had to use a battery to release the calipers. Always good info on this channel 👍.
@jasonhernandez7701
@jasonhernandez7701 2 жыл бұрын
Very thorough! I like His Work Ethic! Very Informative
@olegpokotilov2613
@olegpokotilov2613 5 жыл бұрын
Greetings from Massachusetts!!! Thanks for Another great video thanks
@Mrs.SusieDunn
@Mrs.SusieDunn 5 жыл бұрын
I love tools! Hello from Texas
@anonymouskings5097
@anonymouskings5097 3 жыл бұрын
I like this guys work 😘
@georgegiles6309
@georgegiles6309 5 жыл бұрын
Thanks for the video, I like how you give detailed information on your video's, I watch you from Virginia.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help.
@mattway3496
@mattway3496 5 жыл бұрын
Thanks for another great video
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@Techman-yo5yv
@Techman-yo5yv 5 жыл бұрын
Good step by step tutorial.
@clarkmoore8054
@clarkmoore8054 5 жыл бұрын
My hat’s off to you rust belt mechanics. I would starve to death working in all that crusty crap all day
@All_is_self_co
@All_is_self_co 5 жыл бұрын
Hey Jim the car guy. You told us to come over and comment for the giveaway. I’ve been subscribed to your channel for a while I take pictures and videos of the sky. So I’m definitely interested in the giveaway. If not thanks for your helpful videos.
@johnnynumber5599
@johnnynumber5599 5 жыл бұрын
Thanks for the how to videos they have helped alot with my crv
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@jimmyfiggs6293
@jimmyfiggs6293 5 жыл бұрын
thanks in advance for the scope.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
You never know. Thanks for watching.
@danthecarman1090
@danthecarman1090 5 жыл бұрын
Love the vids, Jim! Sending praises from TX
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@pedrolriveranegron5178
@pedrolriveranegron5178 5 жыл бұрын
Greetings and Blessings Jim! I would like to see some diagnostics videos, using the Oscilloscope. Probably, testing an O2 sensor, Cam/Crank correlation, Can Bus signals using the Breakout Box ect..ect... It would be great and helpful for some beginers! Did you test the BaroScope to see the intake/exhaust valves?
@tracycolorado
@tracycolorado 5 жыл бұрын
thanks Jim for entering me into the Contest . sick and tired of using my dirty ,greasy, phone as a camera instead of a borescope ;- )
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Contact me and let me know where you live.jimthecarguy1@gmail.com
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Contact me and let me know where you live.jimthecarguy1@gmail.com
@VM-wz9bg
@VM-wz9bg 5 жыл бұрын
Thanks for sharing the info.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help.
@Macnificent78_
@Macnificent78_ 11 ай бұрын
What kind of black grease is that you using ???? Imma do my jeep this weekend great video
@mrgreaser123
@mrgreaser123 5 жыл бұрын
thanks for all the videos Jim /connecticut
@doc5962
@doc5962 5 жыл бұрын
Another great video. You make it look so easy.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@dc5723
@dc5723 5 жыл бұрын
Thanks for another great video Jim!
@nyhsmark9250
@nyhsmark9250 5 жыл бұрын
Thanks for the chance.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@franciscovazquez7671
@franciscovazquez7671 5 жыл бұрын
I did my brakes after this video
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@glenharper3136
@glenharper3136 5 жыл бұрын
Another Good video Jim.
@caseylee001
@caseylee001 5 жыл бұрын
Very well explained videos thanks Jim
@paullaws3889
@paullaws3889 5 жыл бұрын
Great video.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help.
@Okie-Tom
@Okie-Tom 5 жыл бұрын
Very good Jim! One thing I would have liked for you to check was when you pressed the Pistons back in the calipers sometimes it overfills the master cylinder with brake fluid, and it can cause brake fluid spillage. Have a good one Jim. Tom
@davidpowell3347
@davidpowell3347 Жыл бұрын
Do some people open the bleeder a little bit so some of the brake fluid comes out when the piston moves back,then when the job is about finished some fresh new fluid can be put into the master cylinder reservoir? Is the brake fluid inside the caliper dirtier than the rest of the system?
@MikeSmith-nu9wt
@MikeSmith-nu9wt 10 ай бұрын
​@davidpowell3347 not worth it, air could possible get in there if it's not done correctly , let the master over flow a little it won't bother it , sometimes if I remember I'll take the cap off , for fear of damaging the cap rubber seal , but I never had a problem with one getting damaged , it's rare .. and I've done it everyway you can think of ..
@dm7097
@dm7097 5 жыл бұрын
Greetings from New York! The rust on that jeep looks like it spent some time in the rust belt. Lol
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@billstreber5194
@billstreber5194 5 жыл бұрын
Great job as always Jim looking forward to more videos
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Hi Bill thanks for watching. Watch for the next free tool giveaway coming soon.
@kevinhultgren995
@kevinhultgren995 5 жыл бұрын
Love the videos!!
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@garrybenoit5551
@garrybenoit5551 5 жыл бұрын
Another great video. Thank you.
@manuallabor7193
@manuallabor7193 5 жыл бұрын
Great video keep them coming.
@DriveShaftDrew
@DriveShaftDrew 5 жыл бұрын
thumbs up and shared good job jim
@billmaxfield7831
@billmaxfield7831 5 жыл бұрын
Great job Jim! Thank you!
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@eldoradony
@eldoradony 5 жыл бұрын
Great video. I wish it was a tip on how to address a broken blend door on the same vehicle. I got that job in yesterday and I don't want to get involved in a full day dash removal. The A/C jobs are showing up in New York.
@cowboy4o1
@cowboy4o1 5 жыл бұрын
great video!
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@alexcorlett3612
@alexcorlett3612 5 жыл бұрын
Thank for the info
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@dond578
@dond578 5 жыл бұрын
thanks jim! great videos! Awesome scope!
@ignacioramirez4744
@ignacioramirez4744 5 жыл бұрын
Nice video. California
@england713
@england713 5 жыл бұрын
Thanks for the videos, could use that great scope!
@jerryperkins235
@jerryperkins235 5 жыл бұрын
Keep the videos coming.and thank 's
@Grumpy111Bastard
@Grumpy111Bastard 5 жыл бұрын
love the videos!!!
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Thanks for watching. I'm happy to help.
@RATannahill
@RATannahill 5 жыл бұрын
Thanks for sharing your knowledge and your awesome giveaways
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@tlmswm
@tlmswm 5 жыл бұрын
Informative.
@TheGeno2001h
@TheGeno2001h 5 жыл бұрын
Great videos sir thank you for your help
@johnbadham-thornhill9964
@johnbadham-thornhill9964 Жыл бұрын
Hi Jim. What size is the allen key?
@daveharnell444
@daveharnell444 5 жыл бұрын
Another enjoyable video. In your last few videos I've seen that you had to deal with rusty stuff. In your channel description I can't see where you're located. What state are you in?
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm in New Jersey. I'm happy to help. Watch for the next free tool giveaway coming soon.
@engineer-gj8ot
@engineer-gj8ot 5 жыл бұрын
Good tutorials.
@kepler240
@kepler240 4 жыл бұрын
T45 or 47 Torx bit, not hex but we get it
@jimthecarguy
@jimthecarguy 4 жыл бұрын
That you for your input and for watchng.
@bradstucky4621
@bradstucky4621 3 жыл бұрын
My 2003 WJ has 7mm hex(Allen) caliper pins/bolts. Try that first.
@rolandpelletier2826
@rolandpelletier2826 3 жыл бұрын
I was just watching your video about you changing out the rear brakes on a 2004 Jeep Grand Cherokee. I noticed when you removed the rotor the parking brake shoes were completely destroyed from normal use however you never mentioned them or replaced them in the video. The shoes are behind the axle and inside the rotor. (Pad in a Hat) Why not replace them when you have the rotor off?
@jimthecarguy
@jimthecarguy 3 жыл бұрын
Actually the shoes were in good condition. The parking brake shoes are thinner than normal brakes. Thanks for your input.
@sirsweetness8332
@sirsweetness8332 5 жыл бұрын
Do you find that Chrysler products are in your shop more than any other make? Even for brakes due to poor quality of mopar parts.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
No not really they are not to bad.
@braydenwillenborg4904
@braydenwillenborg4904 5 жыл бұрын
Minnesota
@TheDisgruntledMechanic
@TheDisgruntledMechanic 5 жыл бұрын
Great job Jim. You know I am from PA! Thanks for all you do!
@shawnyd8009
@shawnyd8009 5 жыл бұрын
Great vids and Giveaway, Thanks Jim the Car Guy !
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help. Watch for the next free tool giveaway coming soon.
@tjhamer3
@tjhamer3 5 жыл бұрын
cool vid
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help.
@bobb3542
@bobb3542 5 жыл бұрын
Thanks for doing the giveaway.Another great video.Watching you from Ct.
@mdlee52
@mdlee52 5 жыл бұрын
Whoa, those rotors were shot!
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Yes to the junk pile for sure. Thanks for watching.
@mrexecutive1
@mrexecutive1 5 жыл бұрын
NIce, Illinois!
@bbkmm1
@bbkmm1 5 жыл бұрын
Greetings from Ohio Jim. Thanks for all your effort.
@chrisparenti2461
@chrisparenti2461 5 жыл бұрын
Was that one of Eric’s customers? I know he’ll be jealous 😜 From California
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Hahaha it was rusty enough.
@bryanlamontagne2914
@bryanlamontagne2914 5 жыл бұрын
Hi Jim, can you post a link to the tool you use at 10:20 ? Thank you
@chrisparenti2461
@chrisparenti2461 5 жыл бұрын
Bryan Lamontagne it’s a brake pad spreader. There’s various different ones on the market. Your local auto parts store will have something similar in stock. They range from really cheap to expensive
@bryanlamontagne2914
@bryanlamontagne2914 5 жыл бұрын
chris parenti thank you Chris, yes I have the one from Cornwall, but I like the style of this one and was hoping he had a link where to find it.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
That was great advice from Chris. The tool that I was using is made by Snap on tools
@bryanlamontagne2914
@bryanlamontagne2914 5 жыл бұрын
@@jimthecarguy Thank you Jim, and thank you again Chris.
@cayman9873
@cayman9873 3 жыл бұрын
With the bright background and dark parts i cant see anything
@zorrbock
@zorrbock 4 жыл бұрын
Unreal. I keep watching videos showing that fucking spring just sliding into place. Pads took 5 minutes and I'm about 2 hrs into trying get that fucking clip into place. Good luck
@jimthecarguy
@jimthecarguy 4 жыл бұрын
Thanks for watching. That spring can be a real pita for sure.
@diydummy2622
@diydummy2622 5 жыл бұрын
Nice video. Thanks.
@jimthecarguy
@jimthecarguy 5 жыл бұрын
I'm happy to help.
@aellis429
@aellis429 3 жыл бұрын
What should I get charged for this? Me buying the parts..? Just need a comparison to know if I’m getting played for being a female.
@KHHappYChannel168
@KHHappYChannel168 5 жыл бұрын
Hi Bro
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Contact me and let me know where you live.jimthecarguy1@gmail.com
@jimthecarguy
@jimthecarguy 5 жыл бұрын
Contact me and let me know where you live.jimthecarguy1@gmail.com
@TheSimpleObserver
@TheSimpleObserver 5 жыл бұрын
MAKE SURE THAT WHEN YOU LEAVE A COMMENT PUT WHAT STATE IN THE U.S.A YOU LIVE. This is my comment. I try to live in Vermont. It will be nice to look at my rust with a camera.
@brewski80009
@brewski80009 Жыл бұрын
Get better lighting
How to Replace Rear Brakes 99-04 Jeep Grand Cherokee
13:54
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 142 М.
How To Perform a Professional Brake Job (Pads & Rotors)
38:48
Royalty Auto Service
Рет қаралды 654 М.
天使救了路飞!#天使#小丑#路飞#家庭
00:35
家庭搞笑日记
Рет қаралды 92 МЛН
小丑把天使丢游泳池里#short #angel #clown
00:15
Super Beauty team
Рет қаралды 46 МЛН
If Barbie came to life! 💝
00:37
Meow-some! Reacts
Рет қаралды 74 МЛН
Schoolboy Runaway в реальной жизни🤣@onLI_gAmeS
00:31
МишАня
Рет қаралды 3,6 МЛН
Most Common Brake Installation Mistakes!
13:29
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 4,4 МЛН
How To Replace Rear Brakes And Rotors 2007 Jeep Grand Cherokee
20:41
The Only Brake Pad You Should Buy
10:07
Scotty Kilmer
Рет қаралды 828 М.
Jeep Grand Cherokee Tie Rod Replacement (1999-2004)
25:55
Tony The Truck Guy
Рет қаралды 47 М.
How to STOP BRAKE SQUEAKING in your car (No Squeaks Guaranteed)
13:53
Junky DIY guy
Рет қаралды 3,7 МЛН
2013 Jeep Grand Cherokee - Rear Brakes - D.I.Y. in the Driveway
13:15
天使救了路飞!#天使#小丑#路飞#家庭
00:35
家庭搞笑日记
Рет қаралды 92 МЛН