No video

Replaced a Wheel Hub? Keep The Wheel Studs. Here's Why!

  Рет қаралды 1,823

Cars Simplified

Cars Simplified

Күн бұрын

Next time you replace a wheel hub or hub bearing, keep the wheel studs! Automotive repair shops often strip the threads or knurling on the studs, and will need something to replace them with. The studs on the old wheel bearing definitely fit your car (you won't have to worry about ordering the wrong ones!) and will only cost you some time if you already have the tools! Removing the wheel studs when the hub bearing is off the vehicle is easier in some ways, but you need to be careful not to get pinched or snapped at by your tools!
If a wheel stud is stripped, obviously you wouldn't want to include that in your just-in-case supplies for the repair shop, but this removal technique should still work on them. Don't forget to recycle your wheel hub/wheel bearing if you can!
Wheel stud removal tool and supplies:
The tool by itself: amzn.to/48Q4CjU *
The kit I personally own: amzn.to/3FiKYzE *
Adjustable wrench / spanner: amzn.to/3S0xi3S *
Work gloves: amzn.to/3LZm3om *
ANSI Z87.1 glasses: amzn.to/3LZLKoX *
(The specialty tool here is considered a ball joint separator, in case you want to find your own, but make sure the opening in the back is wide enough for the head of the wheel stud.)
• carssimplified...
Check us out on Twitter, Instagram, Facebook, and more: carssimplified...
/ cars
(Sometimes previews and exclusive content are shared on these platforms!)
Cars Simplified is a show dedicated to automotive education, including DIY repair, automotive news, auto industry changes, automotive technology, performance modifications, and more, all presented in a friendly and easy to digest manner!
#CarsSimplified #CarsSimplifiedS10 #CarsSimplifiedQT #Automotive #Cars #HowTo
Disclaimer:
Due to factors beyond the control of Cars Simplified, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Cars Simplified assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any video. Due to factors beyond the control of Cars Simplified, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Cars Simplified.
* Cars Simplified earns from qualifying purchases via the Amazon Associate program.

Пікірлер: 4
@KBLIZZ333
@KBLIZZ333 10 ай бұрын
Brass hammer works too. Quicker even. Stress reliever.
@802Garage
@802Garage 10 ай бұрын
I keep my studs, but I'm also a parts hoarder in general. I'd recommend putting a lug nut on the stud to help protect the threads even when using the ball joint separator. Good tip!
@turboflush
@turboflush 10 ай бұрын
Hammer and done.
@runningbear1982
@runningbear1982 10 ай бұрын
Put the lug nut on and whack it with a BFH. Or put on in a press.
Is Your Car or Truck Wheel Hub Stuck? Tips on Getting it Loose!
10:11
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 1,5 МЛН
ROLLING DOWN
00:20
Natan por Aí
Рет қаралды 10 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 39 МЛН
How to 100% diagnose a bad wheel bearing.
6:30
Way of the Wrench
Рет қаралды 1,4 МЛН
Stuck Wheel Bearing; EASY REMOVAL! The Bolt Trick
11:27
GoPro Guy
Рет қаралды 545 М.
Spinning Wheel Stud & Seized Lug? What Would You Do?
21:14
Wrenching With Kenny
Рет қаралды 149 М.
Easy Rust Repair and Lacquer Peel Fix for Your Car.
16:16
CarFixEasy
Рет қаралды 797 М.
Brake Caliper Slider Pin Grease - How Much is Too Much ?
8:58
ScrewsNutsAndBolts
Рет қаралды 383 М.
Here's Why You NEVER Mess With Factory Wheel HUBS!!
11:55
1ROAD
Рет қаралды 951 М.
How to Replace a Front Wheel Bearing
16:26
ChrisFix
Рет қаралды 9 МЛН
How to Change Tie Rods (inner and outer tie rod ends)
13:56
ChrisFix
Рет қаралды 18 МЛН
ROLLING DOWN
00:20
Natan por Aí
Рет қаралды 10 МЛН