Replacing Cub Cadet Drive Shaft Bushings. Vibration Problem!

Рет қаралды 14,004

6 жыл бұрын

Today I replaced the bushings on my Cub Cadet 1210/680. I have been trying to get this tractors vibration taken care of for a while and this helped a lot.
This set up is the same on most, if not all of the of the 82 series hydro tractors. Plus many other Cub Cadet hydro's.
The easy out size I used to remove the rear bushing is 1 1/16th
The socket I used to install bushings is 13/16th.
Bushing part number 941-3004
Price $15 for 4 count on ebay. 2 need for repair.
Flex Coupling/Rubber Isolator pn 722-3000
Price $15.76 plus shipping from parts tree. 4 needed if they are damaged or you feel they should be replaced.
Thank you for watching! Please like and subscribe. Comment below.

Пікірлер: 15

@mowfer 6 жыл бұрын

Never seen an EZ-out used to remove a bearing race. Made it look easy! Thanks for the tips!

@darbleythetractorguy458 6 жыл бұрын

I did my other tractor without the ez-out and it is a pain to get out. Luckly I had a box of "junk" laying around with that ez-out in it. Thanks for watching!

@1coppertop 5 жыл бұрын

Thank you that's exactly what I needed to know.

@darbleythetractorguy458 5 жыл бұрын

Awesome! Thanks for watching

@robertgeary7520 3 жыл бұрын

Great video thank's 👍

@darbleythetractorguy458 3 жыл бұрын

Thank you!

@vap0rtranz 3 жыл бұрын

Your method worked for my older, narrow frame too: free up the flex coupler in the back, unbolt the hub adapter, unbolt the engine, slide the engine forward, and then the cranck shaft is free. Actually I did shaft work from underneath my tractor but I'm pretty small guy -- won't work for big guys.

@joelikesguitar2166 6 жыл бұрын

That was awesome. You rock!

@darbleythetractorguy458 6 жыл бұрын

Thanks for watching!

@robertallen1662 3 жыл бұрын

Looks easy enough, thanks

@billyjack8119 3 жыл бұрын

Ive taken bushings out that way with big taps before lol. Whatever it takes right.

@darbleythetractorguy458 3 жыл бұрын

Lol if it works why not

@stacyeaglin2348 4 жыл бұрын

Well this is what I did. I ran on top of a piece of petrified wood and got the mower off balance. One we got it on the ground again it won't reverse nor go forward. Hmmmm what do you think I damaged? Thanks on advance!

@darbleythetractorguy458 4 жыл бұрын

Its possible that the roll pin broke on the rear drive shaft bracket. The drive shaft will spin but its not spinning the transmission.

@darbleythetractorguy458 4 жыл бұрын

What im talking about is at 1:49 on the video.