Jackpot video on gear repair!!! Truly appreciated! Love and subscribed!

What a fantastic guide was really interesting.. Definitely gives me the confidence to try and repair my BAFANG hub motor.. 👍👍👍

Excellent video, thank you for showing us. My mum has a bafang motor like this on a budget ebike and it needs a new rim now. I intend to service it using this video as reference and will inspect the gears.

Doing this in the coming week , very helpful thanks

Excellent video. How much of this could be avoided by using better lube? I imagine the lubrication dept is a man with a bamboo stick hitting the workers if they use too much. It makes you want to strip yours down just to relube, but warranties.. British manufacturers are no better human resources wise, im a machinist, in sure managers go to the Khmer Rouge school of slavedriving

looking for a new bafang motor like this .. all I can find is the bigger size onces sofar .. Gears look fine in mine (engine makes noise). Anyhow .. enjoyed watching you work on this!

wow dont look that hard, looks like i am going to try to fix myself now. thank you so much for this video

Thanks, very good explanation!

That's an ace explanation and video. Cheers! What will cause this on a motor with less than1200 hours? Am I pushing my bike too hard?

Exactly what is up with my bafang rear hub motor and i haven't took it apart yet

Do people replace the larger sealed bearings on the axel too which press fit into the casing? I can find no videos of this process being done.

Amazing video. Thank you so much. Did it today and bike sounds like butter again. Btw....holy F$#K was it hard to get the old planetary gear structure out with just my toolbox... When I finally flung it above my head after 30ish minutes of prying with various combinations of tools, I threw my hands to the sky in celebration 😆😆

Great video!

Those shims seem really important as ive put my motor back in and it doesn't move or is really stiff, im assuming that is because its catching, i just don't remember seeing any shimms hmmm , bearings seem ok . If i loosen the srews to the housing it turns so im assuming its touching without the shimms . Looking on line amd carnt seem to buy anything specific..any suggestions?

What is your planetary gear removal tool called? The thing that is like a tripod that pulls it out of the motor?

Any advice on planetary gear? Is metal better than the nylon ?

Hi friend, thank you for this video, I'm trying to know how to change the gears because there are no circlips on the axle like other motors?

I have a apais a6 cargo bike and took it out in the rain. I now have loud grinding sound and sometimes delay in motor when breaking and pedaling/throttle again. Its intermittent like 1-2 minutes on my 9 mile commute. What do you suggest I do? deal with it, open it up and clean out and regrease? It only has 230miles on it.

@Ebike Repairs Question for you... if I installed the new planetary gear part without using dielectric grease, how bad is that? Have I drastically shortened the life of the new planetary gears? A tiny bottle of dielectric grease here in Toronto is $16 for a tiny tiny bottle.... so I basically wondered if it was just cheaper to install new planetary gears each time instead of spending the additional money on the grease each time as well. What do you think? (Was also worried to use grease at all because unlike the top of your motor, mine has three holes that allow you to see into the internals of the motor. Though I understand this is the reason why you specifically need 'dielectric' grease)

I hardly ever comment but bro nicely done!

Hi, I have a Halfords Carrera e-bike and the three gears have stripped in the motor (Sr Suntour). I can't find any replacement gears of the size I need - 45mm diameter 32 tooth. would you know where I can get a set? Thanks, Tony.

may I ask how many months or years will wear the gear?

It looks like the gear the planetary gears fit into in the outer wheel Bell I'm not going to try it but it looks like it's replaceable. mine seems to be made out of plastic nylon

17:05 My stepfather calls them Jesus clips. He said they call them that because that's what you'll scream when they fly across the room.

What is the ratio of the gear inside? If the wheel trues 2 rpm, What does the motor turn?

The gears on mine are fine, but are in contact with the alloy casing there @8.21secs and causing resistance when pulling the bike backwards, and also making a noise when under load? Any ideas on how to cure that?

I have the same problem my gears only had two half moons on two of the bearings the gears broke into 8 to 9 different pieces. Exact same motor but I don't have the spaces or the clip ring on the main shaft

Excellent content 👍

Hey mate can I buy the gears from you once I find out today which ones I need

Would you know witch gears I should buy for the Arial rider 1000 watt bafang .. I can't find any info. Thank you

Just wondering do clutches fail? & if so how do you tell?

Hi i have a francis barnet e bike with a 8fun rear hub motor . it spins forwards but wont go backwards! Is this normal? Thank you.

Where can I buy the nylon gears? The separate gears and the gears with the metal plate. I found some on Amazon but it says two months before they arrive. 😢

What size are the gears?

Lithium grease is not good for nylon gears. It damages them. Silicone grease is optimal.

What's the reason for gears stripping?

Is the only material for the gears plastic, and if so why?

I didn't see any of those shims when i took mine apart.

My motor gear is 30 teeth. And I cannot find 30 teeth on internet. Can I replace it with 36teeth? Or what can I do? :/ can someone help me?

❤💯💢💥💫👍👍👍

Włącz tłumaczenie na inne języki, mnie interesuje język polski

Blumin ole!

Why didnt you use metal gears?

These are Nylon gears and you've put WAY too much grease on there.

अपना नंबर दीजिए मेरा मोटर खराब हो चुका है 24 वोल्टेज का है

If you are going to try to make money on youtube, get a proper set of circlip pliers!!

Great video!