very helpful, i had a customer bring in a newer bike and the axle key was never installed
@EbikeRepairs10 ай бұрын
Glad it helped
@gren5093 ай бұрын
The "sprag" clutch is dry. Lift the seal off and put oil into it, it will work fine.
@joehozzy26162 ай бұрын
Yes had same issue. I drilled a tiny hole in clutch and injected oil into it.
@EbikeRepairs2 ай бұрын
Good to know, I'll have to give that a go next time I get an unfixable one! Thanks for the info
@Boediprasetya2 ай бұрын
@@joehozzy2616 If you make a hole in the clutch with a drilling machine, there will definitely be particles that fall into it, how do you get the particles out?
@joehozzy26162 ай бұрын
@Boediprasetya do it carefully and there will be no issues
@Boediprasetya2 ай бұрын
@@joehozzy2616 Thanks Bro
@jorainer6123 ай бұрын
I've got this exact same clutch. Please where did you get a new one? Mines from a volt bike. Like yours looks fine. But sometimes no drive and clunking from the motor so wanted to replace it.
@EbikeRepairs2 ай бұрын
Unfortunately, I didn't manage to get a spare, the manufacturer never responded. I replaced the whole motor for the customer.
@radowane101 Жыл бұрын
I have the same situation in a gazelle ebike, what should i do ? Is it possible to replace only the bearing or i need all the planetary assembly ?
@EbikeRepairs Жыл бұрын
I think you need the clutch mechanism, usually comes with the planetary gears included. I don't know how to replace only the clutch mechanism one way bearing, I think they're sealed units.
@radowane101 Жыл бұрын
@@EbikeRepairs thanks
@bogsquatch6782 Жыл бұрын
Is it possible to loosen up a sticky clutch to help coast for longer
@EbikeRepairs Жыл бұрын
Either bearing replacement or a new clutch assembly would be needed. What motor do you have?
@bogsquatch6782 Жыл бұрын
@@EbikeRepairs thanks man I have the engwe pro motor. I found out that model has a welded clutch to enable regen from the motor. I uploaded a post of the two clutches for anyone to compare. Such a relief the new clutch coasts for days
@EbikeRepairs Жыл бұрын
i didnt know that, thanks!
@DikTrom9 ай бұрын
woodruff key is round, this seems to be a square one not?
@EbikeRepairs9 ай бұрын
AFAIK this is standard but maybe I'm calling it the wrong name - it's a keyway slot filler jobbie
@bernardpayne2882 Жыл бұрын
Hi, did you find a source for the clutch? I also have a smaller axle - 13.5mm
@EbikeRepairs10 ай бұрын
unfortunately not. sorry!
@nickbryant36959 ай бұрын
@@EbikeRepairs Did you end up having to replace the whole motor in the end? I have a Promovec motor with the same issue, and exactly the same Planetary Gear part that has failed. Bafang gears are easy to source, but not Promovec it seems.
@nickbryant36953 ай бұрын
Answering my own question here, but I managed to get a replacement clutch from Batribike, who are the UK distributors of Promovec motors. Took about 6 weeks to arrive as they need to import the part but is now installed and all working again. Many thanks for the original video as it was a great help in working out how to take the motor apart.
@Boediprasetya2 ай бұрын
36T 38mm Planetary Gear with Clutch.... Do you use this clutch?🚲🚲🚲🚲
@EbikeRepairs2 ай бұрын
Unfortunately I couldn't find a clutch for this motor, sorry
@akhilkumarkar91123 ай бұрын
I have facing same problem sir, 😞
@EbikeRepairs2 ай бұрын
One of the comments mentioned injecting some oil 👍
@mazharalimazharali2892 Жыл бұрын
AoA sir motr k jo andr graria 3 hoti h wo ni mil rhi h
@EbikeRepairs Жыл бұрын
Sorry buddy I'm only fluent in English, could you translate, please
@patrickjfekkin67159 ай бұрын
Hi can you please let me know if you fix and customer bikes please post how I can contact you!