Gun Restoration | Colt Model 1903 Pocket Hammer, (with test fire)!

Рет қаралды 86,084

17 күн бұрын

#restoration #restore
Here is an amazing part of design history for colt modern handguns. The restoration of the colt Model 1903 pocket hammer. The Colt pocket hammer was modeled after the Colt sight safety and Colt 1902 Sporting and military models. This model has no slide stop or safety. This model was different from the 1911 in the fact that it had two barrel link pins rather than just the one. The 1903 also had a huge design flaw. The rectangle locking pin at the front of the slide could brake sending the slide right into your face since the takedown of the slide was in reverse of the 1911. All in all the model had its drawbacks and maybe one positive. This pistol was ambidextrous due to no slide stop or external safety. Hope you enjoy the video and as always thanks for watching. Please consider subscribing for new upcoming videos.
Pay Pal account, paypal.me/thekinzlerbros?loca...

Пікірлер: 364

@johnwilliams1091 16 күн бұрын

Watching these always makes me want to go clean something

@TheKinzlerBros 16 күн бұрын

Ya that makes sense, thanks for watching we appreciate it!

@rerskins 16 күн бұрын

I personally appreciate the voice over explanation of what you’re doing and why. Thank you for sharing and the video, not to mention saving another handgun.

@TheKinzlerBros 16 күн бұрын

Thanks for the feedback, we appreciate you and thanks for watching!

@Cheung_Kody 10 күн бұрын

@@TheKinzlerBros I respectfully disagree. While I appreciate the knowledge transfer, I use these videos to wind down before going to sleep, dialogue doesn't help with that. Your videos though, do what you like.

@hallofguns8174 15 күн бұрын

The guns look better and better with each restoration! Keep up the fantastic work!

@TheKinzlerBros 14 күн бұрын

Thank you very much, will do!

@stephensmith4480 11 күн бұрын

Those results were amazing. With a replacement barrel that pistol would be as good as the day it was made. Great video.

@TheKinzlerBros 11 күн бұрын

Thank you we appreciate it, ya a new barrel would be the finishing touch. Thanks for watching!

@gerardjames9971 15 күн бұрын

Delighted to see another Kinzler Broseley video dropped this morning 👍

@TheKinzlerBros 15 күн бұрын

Hope you enjoyed it! Thanks for watching!

@yevgenz 15 күн бұрын

Mesmerizing videos. If you could make twenty of those a day, I would watch them all. Thanks for posting.

@TheKinzlerBros 15 күн бұрын

Thank you for the kind words and I would if I could. Thanks for watching

@dwightehowell8179 13 күн бұрын

Unless that gun was a range gun at a shooting club or some such I find it hard to believe that one shooter actually put that much lead down one barrel. That isn't a hot round. Even if you had new rifling cut the bore might be to large. At ten feet or so it might still hit.

@TheKinzlerBros 12 күн бұрын

It must have been for the rifling to be gone, thanks for watching!

@Donkusdelux 13 күн бұрын

Really nice to see someone correctly restoring these. Great work

@TheKinzlerBros 13 күн бұрын

Ya there are a few hacks out there. Thanks for watching we appreciate it!

@notnowchief.3089 13 күн бұрын

Correctly restoring them maybe. But they are intentionally rusting these firearms, and then putting up this Farce like they're saving them 😣

@notnowchief.3089 13 күн бұрын

@@TheKinzlerBrosjust don't understand why y'all intentionally Rusty things and then act like you're restoring them you're using vinegar and saltwater... it's seriously just so dishonest

@stefanwesterberg5319 16 күн бұрын

Awesome restoration as always! 😎👍 I love how the parts comes out clean after glass bead blasting. Top level gun restoration channel on KZfaq! 👍

@TheKinzlerBros 16 күн бұрын

Thanks for the kind words and for watching!

@pyro323 6 күн бұрын

Is there anywy to restore the rifling in the barrel? I've seen people mig weld a bore and machine it down but I don't know if that's an option in this application.

@TheKinzlerBros 6 күн бұрын

You can resleeve it but, not sure if you can fix it without doing that. Thanks for watching

@josephleister9198 14 күн бұрын

Very nice work....powerful enough its day too.

@TheKinzlerBros 14 күн бұрын

Thank you, absolutely! Thanks for watching

@oyeyae 16 күн бұрын

Nice job man

@TheKinzlerBros 16 күн бұрын

Thanks!

@santosrojas9610 16 күн бұрын

After You Restored It Don't Leave It Dry Put Some Lubricant So It Won't Jam It Will Function Well.Replacement Parts Are Available

@TheKinzlerBros 16 күн бұрын

I lubricate everything it doesn't always make the video. Ya I know, thanks for watching

@The_Wood 16 күн бұрын

Glad y'all are back. Been hoping nothing was wrong. I always look forward to your next video. I always learn something from each video. The videography, narration, and notes all contribute to the top quality of every video. Please keep the content coming.

@TheKinzlerBros 16 күн бұрын

Ya we wish we could put more videos out but, it takes time and we still have a full time job. Thank you we are glad to hear it. Thanks for watching we appreciate it!

@Our_Life_Adventures 5 күн бұрын

what a beautiful piece

@TheKinzlerBros 5 күн бұрын

Yes it is, thank you. It's amazing how smart they were to keep improving the design. Thanks for watching!

@bobbressi5414 16 күн бұрын

I imagine one could just hand load 38 super ammo to the lower pressure of the older cartridge since they are dimensionally identical.

@TheKinzlerBros 16 күн бұрын

Yes you absolutely can do that all you need is to know the load and fps. I believe now I do not re load ammo and I’m not well versed in the procedures in re loading. But I read on a forum that you can do this yea. But .38 acp is available online. That’s where I got the cartridges to fire this colt. They are loaded to period cartridges that the firearm was designed for. But that doesn’t mean that one of these old colts can’t fail upon firing. Which is really scaring to think about if that from barrel link pin failed and the rectangle pin failed the slide could become a projectile directly at your face. Sorry for the long response. Thanks for watching

@zillsburyy1 11 күн бұрын

the pistol used by the paratroopers as they defended themselves in the church OPERATION ANTHROPOID

@TheKinzlerBros 11 күн бұрын

Thanks for the info, didn't know that! Thanks for watching

@mantia39 3 күн бұрын

How were those rounds in such good shape? I mean come on! They weren't even tarnished!🤨

@TheKinzlerBros 3 күн бұрын

I don't know what you are talking about, I still wasn't going to use them. Thanks for watching

@mantia39 2 күн бұрын

@TheKinzlerBros ..LMAO...OK pal. Whatever you say...🙄

@bocan3189 16 күн бұрын

Very fine work as usual Kinzleri! It looked like there was a quarter-cocked safety function on this fine piece when you worked the hammer during reassembly...yes? Or was it just me? Carry on the awesome!

@TheKinzlerBros 16 күн бұрын

Thanks we appreciate it, ya you are correct! Thanks for watching!

@richardcunningham5540 15 күн бұрын

amazed that magazine came out as easy as it did. It looked completely rusted shut. Awesome resto. Beautiful result in the end. Came out new!

@TheKinzlerBros 15 күн бұрын

Ya me too, thanks we appreciate it! Thanks for watching

@scottblair8625 Күн бұрын

Why not replace barrel? With all the work you did. This would be such a nice weapon with rifling

@TheKinzlerBros Күн бұрын

Ya I probably will, thanks for watching!

@davidgleaton9073 16 күн бұрын

Well done indeed on a challenging piece of work.

@TheKinzlerBros 16 күн бұрын

Thank you, yes it was. Thanks for watching

@francescorossi2368 16 күн бұрын

I remember when you restored my favorite Beretta 34. Also in this case, you are simply great!!!

@TheKinzlerBros 15 күн бұрын

Ya that was a fun one, thanks for the kind words and for watching!

@maxpower6765 15 күн бұрын

Great job guys. Love seeing these old guns being brought back to life 🤙🏼

@TheKinzlerBros 15 күн бұрын

Thanks, it is very satisfying for me Thanks for watching!

@kumamonkumamoto3844 16 күн бұрын

I hope not too many mouses had to suffer to get that amount of mousemilk out of the mouses

@TheKinzlerBros 15 күн бұрын

Haha right! It's a weird name for a penetrating oil. Thanks for watching

@BULLET_J3ST3R 6 күн бұрын

Is there anyway you could've restored the rifling in the barrel? Just curious.

@TheKinzlerBros 5 күн бұрын

You could resleeve it, thanks for watching!

@russhoffman6301 11 күн бұрын

When the rifling grooves are in the condition such as in the video, can they be re-grooved or "freshened" up?

@TheKinzlerBros 11 күн бұрын

You could, you could also have it sleeved. Thanks for watching!

@officedullard8722 15 күн бұрын

I was going to watch this earlier but had diarrhea... again. So I watched it now. Thanks for restoring.

@TheKinzlerBros 15 күн бұрын

Didn't need to know that part but, we appreciate you watching! Thanks for the support

@chardtomp 14 күн бұрын

Nice restoration. It really needs a new barrel though.

@TheKinzlerBros 14 күн бұрын

Thanks, yes it does. Thanks for watching

@armorer94 15 күн бұрын

Keep an eye out for a new/ old stock or used barrel.

@TheKinzlerBros 15 күн бұрын

I will for sure, thanks for watching!

@bumpercoach 15 күн бұрын

good to see you using multiple rods for removing the mag so halving the stress on the count holes but still recommend using bamboo chopsticks ;-)

@TheKinzlerBros 15 күн бұрын

Ya, thanks for the advice.

@restaurandocoisasvelhas 11 күн бұрын

Perfect work, congratulations my friend. You gained a subscriber. Mother of strength too, thank you.

@TheKinzlerBros 11 күн бұрын

Thanks we appreciate the support, awesome! Thanks for watching

@max.m.8873 15 күн бұрын

🙋 Congratulations on adding to the collection, great model. Soon you will collect all the early automatic Colts.👍👏💪

@TheKinzlerBros 15 күн бұрын

Thanks, ya that's the goal! Thanks for watching

@Rawsolo 15 күн бұрын

Another beautiful restoration.

@TheKinzlerBros 15 күн бұрын

Many thanks!

@LoneStar1955 16 күн бұрын

Nice, was surprised you were able to hit the disc onto the Texas Star. Wow that barrel was almost slick. Good job guys.

@TheKinzlerBros 16 күн бұрын

Ya me too, thanks we appreciate it! Thanks for watching

@HEYBERT1984 16 күн бұрын

Outstanding work once again. 🍻

@TheKinzlerBros 16 күн бұрын

Thanks we always appreciate it, thanks for watching!

@marty01957 16 күн бұрын

Great job! Thanks for posting!

@TheKinzlerBros 16 күн бұрын

Thank you, thanks for watching!

@piplup2009 15 күн бұрын

Will bare metal rust a lot quicker or is it done to look more faithful to how it originally looked?

@TheKinzlerBros 15 күн бұрын

Yes, hot bluing helps prevent rust! Thanks for watching

@alexandersuvorov4608 14 күн бұрын

Excellent job. Very interesting Colt gun. Very cool when antique weapons return to working condition. Bravo man!

@TheKinzlerBros 14 күн бұрын

Thank you, yes it is! It's very satisfying work. Thanks for watching

@dougwilliams8602 9 күн бұрын

What is your process of cleaning inside the barrel ?

@TheKinzlerBros 9 күн бұрын

Glassbead blasting what I can then just regular bore cleaning tools

@pa4tim 16 күн бұрын

Does it not matter that the riffling is gone and the bore is worn out ? Can you buy replacements or rescue the original (Bore it and insert a liner or so (I'm new at this so excuse if it is a stupic question.))

@TheKinzlerBros 16 күн бұрын

It matters for accuracy, ya you can buy a different barrel and preserve the one you have if you have the equipment and knowledge. Thanks for watching

@RoninDosho 13 күн бұрын

Really nice job on that one, and you did damn good on that test fire. Imagine with a new barrel!!

@TheKinzlerBros 13 күн бұрын

Thanks, ya it would have nice. Thanks for watching!

@robertjessen1554 15 күн бұрын

A great job saving a fine old firearm. Did you glass bead the inside of the magazine too ?

@TheKinzlerBros 15 күн бұрын

Thank you, yes I did. Thanks for watching!

@MASI_forging 3 күн бұрын

Nice 👍👍

@TheKinzlerBros 3 күн бұрын

Thanks 👍

@BUTCH0120 15 күн бұрын

How did you bead blast the interior of the magazine? Was the Evaporust soak sufficient?

@TheKinzlerBros 15 күн бұрын

The evaporust helps but, I'm able to get it with the fine glassbead.

@blankczechz 11 күн бұрын

Great job! I'd be proud to own that old Colt. And compared to that first view of the barrel? Shot out out or not, you made it work. Some pilots in WWII would carry their own personal pistols. I can imagine some young pilot in WWI having that Colt from home with him in his jacket in case he needed to make a forced landing.

@TheKinzlerBros 11 күн бұрын

Thanks, we are! Ya it's crazy to think about what they did for this country! Thanks for watching

@scottrobinson3281 16 күн бұрын

Outstanding camerawork! Restoration perfection.

@TheKinzlerBros 16 күн бұрын

Thank you for the kind words and for watching!

@76629online 16 күн бұрын

Nice looking pistol. It looks like somebody probably carried that thing every single day for a very long time. I wonder how many rounds it took to wear out the barrel like that? From the sounds of it, it seemed like the bullets were tumbling when they left the barrel at least half of the shots you fired.

@TheKinzlerBros 16 күн бұрын

Thanks, I like it too. It takes so many clips to make a bore smooth like that. Thanks for watching

@fload46d 13 күн бұрын

Didn't know there was a 1903. Really a great job. It turned out very well. Too bad about the rifling.

@TheKinzlerBros 13 күн бұрын

Ya they had a few trial and errors before they got to the 1911. Ya for sure. Thanks for watching

@punknoodles0 16 күн бұрын

Always love a Sam Colt design.

@TheKinzlerBros 16 күн бұрын

Me too, thanks for watching!

@cowboybebop3994 16 күн бұрын

Samuel Colt died in 1862, so even though this model is carrying his name, it was not designed by him, but by John Moses Browning. But don't get me wrong. I think that this is one of the nicest looking designs of a handgun ever made, especially in the hammerless version. Maybe only put in the shadow by the Luger 08.

@punknoodles0 16 күн бұрын

@@cowboybebop3994 Damnit, that's right. I r stoopid

@emelierose1472 15 күн бұрын

Beautiful restoration well done 👏 👍

@TheKinzlerBros 15 күн бұрын

Thank you very much!

@CrimsonSurvival 4 күн бұрын

Need to polish up the feed ramp a bit.

@TheKinzlerBros 4 күн бұрын

I think it wasn't ejecting the spent round fast enough but, that wouldn't hurt. Thanks for watching

@18echo 16 күн бұрын

Bravo 👏, another superb restoration 👍👍💪🏼💪🏼

@TheKinzlerBros 16 күн бұрын

Thank you very much!

@yugirambo6762 15 күн бұрын

не знаю как вам) а по моему очень красивый пистолет) в плане инженерном, необычный он!

@TheKinzlerBros 15 күн бұрын

Ya it's a great gun, just a design flaw. Doesn't have a slide stop, so if the take pin breaks the slide will fly off!

@-DC- 15 күн бұрын

Beautiful Pistol Good Design Always just looks right 🫶

@TheKinzlerBros 15 күн бұрын

Absolutely, thanks for watching!

@scttewegner72 13 күн бұрын

You could always buy another barrel if you want to make it a shooter.

@TheKinzlerBros 12 күн бұрын

Absolutely, thanks for watching!

@davidhandyman7571 15 күн бұрын

Great to have you back with another fantastic restoration.

@TheKinzlerBros 15 күн бұрын

Glad be back, thanks for watching!

@carlubambi5541 11 күн бұрын

Amazing restoration and it works !

@TheKinzlerBros 11 күн бұрын

Thank you, absolutely! Thanks for watching

@hallofguns8174 15 күн бұрын

How did you clean the grips?

@TheKinzlerBros 14 күн бұрын

Evaporust and magic eraser after that.

@hallofguns8174 14 күн бұрын

@@TheKinzlerBros Cool, thanks for the tip.

@johnsavage6628 15 күн бұрын

This is a beautifully simple gun.

@TheKinzlerBros 15 күн бұрын

Absolutely, thanks for watching!

@clifbradley 16 күн бұрын

Are you going to recut grooves? There should be enough bore space to recut them

@TheKinzlerBros 16 күн бұрын

No, I don't have the tools to do that yet.

@peterwright217 15 күн бұрын

ah ,M Browning what can you say, nice rebuild of the 38super.

@TheKinzlerBros 15 күн бұрын

Right! Thanks for watching

@WATTAN-AOI 16 күн бұрын

Amazing handgun restoration technology. It's a Colt handgun, after all. By the way, are you a gunsmith?

@TheKinzlerBros 16 күн бұрын

Thank you very much we appreciate it, not a certified gunsmith. Thanks for watching

@Maxcriger 15 күн бұрын

If you only manage to find a replacement barrel it should be fine like in the good old time 😉

@TheKinzlerBros 15 күн бұрын

Ya I can find one for sure, thanks for watching

@larrykelly2838 16 күн бұрын

Very nice restoration on an old colt, darn gun is older than me lol.

@TheKinzlerBros 15 күн бұрын

Thank you, You would be really old if you were older than it! Thanks for watching

@jefferyedwards5003 15 күн бұрын

Excellent job!

@TheKinzlerBros 15 күн бұрын

Thanks

@bigolemike33 15 күн бұрын

Another Great restoration job well done.

@TheKinzlerBros 15 күн бұрын

Thank you very much!

@foxwhiskey 15 күн бұрын

Nice job ! Your restorations are always worth watching and a pleasure to do so. Btw... is the hot-blueing solution useable twice or more ? Greetings !😊

@TheKinzlerBros 15 күн бұрын

Thanks we appreciate the kind words and support. You can but we don't. Thanks for watching

@knoflook1962 16 күн бұрын

Awesome, as always! Funny, because I really don't like Guns. But for someone as clumsy as me, watching you work is like Magic. Really cool! 👍

@TheKinzlerBros 16 күн бұрын

Thank you very much for the kind words we appreciate it, thanks for watching!

@meninoandrade9833 11 күн бұрын

Hot booling looks gun clean and accurate well done

@TheKinzlerBros 10 күн бұрын

Yes it does, thanks!

@terrystephens1102 15 күн бұрын

Great job on the restoration, pity the rifling was so far gone. 👌👌👌❤️

@TheKinzlerBros 15 күн бұрын

Thank you very much, ya for sure!

@lawwdogg1digr 16 күн бұрын

Cool video. Use a brass punch to avoid damaging the metal.

@TheKinzlerBros 16 күн бұрын

Thanks, they are they are just coated. Thanks for watching

@lito9859 16 күн бұрын

Greetings from Italy guys. I love your restorations.

@TheKinzlerBros 16 күн бұрын

Thank you very much! We appreciate you watching!

@robertomazzoni1955 13 күн бұрын

Un lavoro perfetto. Bravo.

@TheKinzlerBros 12 күн бұрын

Thank you, thanks for watching!

@petegibson863 15 күн бұрын

Hi Brandon , Another superb piece of firearm restoration , more history saved , loved the rubber glove finger clicking , you are a true master , if it was an Olympic sport , you would be a gold medalist ! Thanks for posting , always enjoyed immensely .

@TheKinzlerBros 15 күн бұрын

You are so kind sir, thanks we appreciate your support Pete!

@joem1413 15 күн бұрын

with no rifling in the barrel, I'm surprised he hit anything.

@TheKinzlerBros 15 күн бұрын

Ya I was impressed myself, thanks for watching!

@mohamadstouhi6655 15 күн бұрын

Good work

@TheKinzlerBros 15 күн бұрын

Thanks

@saschadomek8079 16 күн бұрын

You´re an artist ! It is incredible what you did´t with "precious scrap". big fan and Greets from Germany

@TheKinzlerBros 15 күн бұрын

Thank you for the kind words, we appreciate your support!

@saschadomek8079 15 күн бұрын

@@TheKinzlerBros Do you have any news group to point question? For example size of glass bead you use. best regards

@williamteague8865 13 күн бұрын

Another great job, love the way you guys film these vids, very satisfying!

@TheKinzlerBros 12 күн бұрын

Thanks William, thanks for the kind words! Glad you like them

@irafowlerjr.7492 16 күн бұрын

Fantastic, beautiful 😊

@TheKinzlerBros 16 күн бұрын

Thank you, thanks for watching!

@sebetletirsportif5717 16 күн бұрын

Very interresting old gun. Your gunsmith job is amazing. I wait about your videos every month. Thanks for this moment. A french gunner

@TheKinzlerBros 16 күн бұрын

Yes it is, thank you very much! We appreciate youf support! Thanks for watching

@oldmangrady 16 күн бұрын

Love the videos. I like the restorations but watch mostly to see how to disassemble/reassemble the guns. Thanks

@TheKinzlerBros 16 күн бұрын

Thanks we are happy to hear it, ya that is the interesting part! Thanks for watching

@peterwright217 15 күн бұрын

oh, do you use new factory ammo or try and use older ammo in the test fire?

@TheKinzlerBros 15 күн бұрын

They are new but, they are loaded for that specific gun to handle.

@Dom_nar 15 күн бұрын

Excelent restoration men colt The best

@TheKinzlerBros 14 күн бұрын

Thank you very much! Thanks for watching

@Microman504 15 күн бұрын

I KNEW YOU NEEDED 3 HANDS DO THIS KIND OF STUFF! 11:10

@TheKinzlerBros 15 күн бұрын

Ya sometimes it's required, thanks for watching! Lol

@Microman504 15 күн бұрын

@@TheKinzlerBros Awesome work as always! Can't wait to see what's next!

@georgepretnick4460 15 күн бұрын

Jus' askin'. Is that the model that without the slide stop, the slide ends up in the shooter's eye? There was a Colt that did that.

@TheKinzlerBros 15 күн бұрын

Ya if the take down pin fails it can fly off. Thanks for watching

@philanna38 15 күн бұрын

Nice job! Beautiful gun!!

@TheKinzlerBros 15 күн бұрын

Thanks, thank you for watching

@user-zw6kl3rz7b 13 күн бұрын

Спасибо за работу! Красивый пистолет. P.S. Бронзовый боёк - это интересно...

@TheKinzlerBros 12 күн бұрын

Your welcome, thanks for watching we appreciate it. Ya I didn't know till I had to replace this one

@shaquille.oatmeal885 10 күн бұрын

I just have only one request please like can you do the voice over only at the begging and at the ending beacuse i watch it at night and i like to geare the asmr of that gun sounds and ectt like you can add as much as you want in the begging but not in between please but hey love your content king

@TheKinzlerBros 9 күн бұрын

Thanks for the feedback we appreciate it, thanks for your support of the channel!

@oneweddy69 16 күн бұрын

Superb video as always... but im more preferring asmr video like before... no talking just some subtitle will do...

@TheKinzlerBros 16 күн бұрын

Thanks we appreciate it, thanks for the feedback and for watching!

@shawnthompson5166 15 күн бұрын

Why don’t you oil the internals before reassembly ?

@TheKinzlerBros 14 күн бұрын

I do, it just doesn't make the final cut, thanks for watching!

@geoffsmiller 15 күн бұрын

You do well, but you need to learn to take it to the next level by refinishing the metal prep with files, blocks with sandpaper to restore the grain.

@TheKinzlerBros 15 күн бұрын

Thank you and thanks for the advice!

@clifbradley 16 күн бұрын

Why don't you use instant bluing? Is it inferior?

@TheKinzlerBros 16 күн бұрын

Yes it is, thanks for watching!

@charlesta654 15 күн бұрын

i am so jealous of you boys over the pond.we will need a licence for a catapult soon....😒

@TheKinzlerBros 15 күн бұрын

Ya that law sucks, you might have to fly over here. Thanks for watching!

@christinesmith7625 15 күн бұрын

i have one of these mint my carry gun thanks dad

@TheKinzlerBros 15 күн бұрын

That's a nice family heirloom. Thanks for watching

@danielzam2921 10 күн бұрын

Execelente trabajo!!🙂👍🏻

@TheKinzlerBros 9 күн бұрын

Thank you very much! Thanks for watching

@austinstratman1809 15 күн бұрын

Amazing as usual!!!!!!!!!!!!!!!!!!!

@TheKinzlerBros 15 күн бұрын

Thanks again!

@donparker1823 16 күн бұрын

I had no idea anyone ever made a .38 in a semi-auto. Looks like no rifling = shoots high?

@TheKinzlerBros 15 күн бұрын

Well you learn something new everyday they say. Ya a little, thanks for watching!

@Bacardibatman 16 күн бұрын

A really good restoration as always, really liking the way the videos are improving 👍👍👍👍👍

@TheKinzlerBros 15 күн бұрын

Thanks, we appreciate the feedback!

@weswright3187 16 күн бұрын

Can you tell me how inaccurate guns become when the rifling is gone? Love your show.

@TheKinzlerBros 16 күн бұрын

Idk, it varies from gun to gun and the longer the barrel. It will be less accurate I believe without rifling.