Restoration the Rusty Old Drill // Rusty Motorized Rugged Version

No video

Restoration the Rusty Old Drill // Rusty Motorized Rugged Version

Рет қаралды 92,427

Күн бұрын

Old Rusty drill Restoration // Solid Version With Rusted Motor.
In this video, I bought an old bench drill at the scrap yard. Its price is so cheap that it startled me. Drilling diameter (in mm) 6mm, 10mm, 13mm, 16mm, 20mm, 22mm, 25mm, 32mm. I feel the need for a recovery. It's super rusty on the bottom and very dirty but it still works. So I started with disassembling, what turned out to be very complicated. Like new creations and buildings and can also be restored. I hope you find something useful and interesting from this video! I am very happy to receive your feedback, advice and suggestions to improve myself more and more. !!! I apologize for the mistakes if I have made in this restoration!!! Thank you very much follow me:
Skill Recovery

Пікірлер: 65

@jamescraig5421 Жыл бұрын

Hell of a Restoration Bro.👏🏻👏🏻👏🏻

@valdemargomes5100 Жыл бұрын

FICOU NOVA E CHIK PARABENS PELA RESTAURAÇÁO NOTA 3000

@SteampunkStyle 2 жыл бұрын

Look, they really have new bearings available to sell in their country! 😂😂😂

@AandB1998 2 жыл бұрын

It's one thing to give the man a piece of advice on how to do it better, and another to just complain about how he chose to do it. For those that are the complainers, you may restore yours as you see fit. Assuming of course that you will get off your butt and do it. His method still worked. This project turned out just fine and I appreciate your effort in restoring this tool. Thank you!

@RamKishan-em3lp 2 жыл бұрын

Very Nice and very hard work 👌

@atlnmurthy3330 2 жыл бұрын

Dear friend, you did a great job and unfortunately you made few mistakes: you should never use a metal rod to remove cast iron parts. Result - the parts will break. Insted you would have used a wood log. Most important is the drilling bed. No where in the world any body will paint the drilling surface bed. It should be neatly polished with the maximum available smooth emery sheet and keep always oiled. Otherwise, the restoration has done well. Still I feel it would have been done better with little patience. Good luck.

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

@georgebrown8312 2 жыл бұрын

Great work and the drill press works like a charm as well. Just like new.

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

@user-ej9ex7zd4w 2 жыл бұрын

Поломал станок , а потом и ещё покрасил не то , что надо и не в тот цвет . По чугунным деталям запрещено бить железным молотком .

@restorationsskills4967 2 жыл бұрын

I apologize for the mistake if I did in this restore!!! Thanks for watching and supporting me. Thanks a lot!!!

@rolandolievanoagudelo.5112 2 жыл бұрын

Muy buena restauración maestro felicitaciones.

@Miricrafts 2 жыл бұрын

Hard work but very nice result 👍

@restorationsskills4967 2 жыл бұрын

I am happy to receive your feedback, advice, suggestions to improve myself better. I really appreciate this! Thanks for watching and supporting me. Thank you very much!!!

@RestorationAustralia 2 жыл бұрын

Well done.

@restorationsskills4967 2 жыл бұрын

Thank you very much

@linus031961 2 жыл бұрын

Great work. But why do you paint the chassis without knowing if it's working or not ?

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

@sddiymakeitworthit7512 2 жыл бұрын

Really awesome 👏 job like new 👍

@zsuzsu2657 2 жыл бұрын

Привалочную поверхность красить? Дилетант!!! ДИЗ, ДИЗ, ДИЗ!

@misha_pankof 2 жыл бұрын

Правильно говоришь

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

@danielgeraldo2826 2 жыл бұрын

Ótimo trabalho, ficou uma maravilha! Parabéns pelo seu vidio.

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

@TedsEscapades 2 жыл бұрын

I enjoyed the restoration, but please either crimp or solder your motor joints as it is a electrical safety and massive fire risk if you just twist the wires. I concur with the comment about using a steel rod

@restorationsskills4967 2 жыл бұрын

I am happy to receive your feedback, advice, suggestions to improve myself better. I really appreciate this! Thanks for watching and supporting me. Thank you very much!!!

@Tatal.b 2 жыл бұрын

Parabéns ! Trabalho de gente sabida👍👍👍👍👏👏👏👏👏👏👏👏😟🍀🇧🇷

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

@Austeration 2 жыл бұрын

Turned out great amd👍 I even like the orange paint. Nice work.

@ferd.6779 2 жыл бұрын

Good job, and nice result for many years to come!

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

@orchidlove-kz2ky 2 жыл бұрын

Hello friend. Nice to meet you. I'm enjoying your video.

@summerpowder6540 2 жыл бұрын

👍🏽👍🏽👍🏽

@restorationsskills4967 2 жыл бұрын

I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better

@Forestcamp313 2 жыл бұрын

Great restoration bro......thanks

@restorationsskills4967 2 жыл бұрын

Tôi rất vui khi nhận được những phản hồi, lời khuyên, góp ý của các bạn để ngày càng hoàn thiện mình hơn !!! Tôi xin lỗi vì sai sót nếu tôi đã thực hiện trong lần phục chế này !!! Cảm ơn các bạn đã xem video.

@jimbaldacchino3755 2 жыл бұрын

well done

@restorationsskills4967 2 жыл бұрын

I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the mistake if I did in this restore!!! Thank you for watching the video.

@ddrusa 2 жыл бұрын

I notice that your paint signature is orange and black

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

@ddrusa 2 жыл бұрын

@@restorationsskills4967 Any time

@HNIZAR45 2 жыл бұрын

Nice work

@restorationsskills4967 2 жыл бұрын

@claudelannois8821 2 жыл бұрын

Vite fait bien fait ? 🤔🤔🤔🤔🤔🤔

@restorationsskills4967 2 жыл бұрын

I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better !!!I Apologize For The Mistake If I have Made In This Restoration !!!Thank You For Watching The Video. Don't Forget To Like And Subscribe To Channels

@bighairynuts4u 2 жыл бұрын

destroyed that drill, smh

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

@robertobezerra8376 2 жыл бұрын

Jóia 👏👏👏👏👏👏💯💯👍👍🇧🇷

@restorationsskills4967 2 жыл бұрын

I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the error in this Restoration

@larrykelly2838 2 жыл бұрын

Nice

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

@wilburowens3056 2 жыл бұрын

No sound and it a rerun show

@user-cn9of3lv9w 2 жыл бұрын

Супер 😀😀😀👌🏼👌🏼👌🏼

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

@user-gw6en2pu3f 2 жыл бұрын

Где ты берёш такой хлам?

@churlepatakha 2 жыл бұрын

Your cleaning process is casual and poor, the brushing wheel is used superficially. Needs a lot of improvement in cleaning and painting!

@user-pg8st8sy7j 2 жыл бұрын

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@restorationsskills4967 2 жыл бұрын

Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!

@rcr1390 2 жыл бұрын

???

@restorationsskills4967 2 жыл бұрын

I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the mistake if I did in this restore!!! Thanks for watching and supporting me. Thanks a lot!!!