I Built a MINIATURE Turbofan Engine. Assembly and Start of the Model Kit

Рет қаралды 441,753

Күн бұрын

Today we will assemble with you a miniature turbofan engine kit.
DM119 Turbofan Engine Kits: bit.ly/49LcLXj
Jet Engine: bit.ly/3sNreBy
Stirlingkit Black Friday: bit.ly/40NL8IY
Thank you very much ‪@Stirlingkit‬ for the model kit
Become a channel sponsor and you will get access to exclusive bonuses. More details:
/ @restorationkamasutra
#build #engine #modelkit #stirlingkit

Пікірлер: 258

@STEN3326 5 ай бұрын

I want to hear the noise and not music !

@Passions 5 ай бұрын

It sounds like a cheap toy that's why the music plays.

@jodyssey9921 4 ай бұрын

I didn't see any fuel and there are holes in the side, also don't those fans need to be balanced perfectly? Quite a bit of rattling when bolted together, real jet rpms would tear it apart, if I had to guess it only runs by the electric motor.

@Kruzin87 4 ай бұрын

Yea as cool as it is it's not real jet engine that runs off fuel that's why the wires are coming around it to the control module that probably has batteries in it to make it turn faster and what not a real one would have alot more parts that's for sure and be crazy more expensive lol but it's still cool though if it didn't cost so much id def like to build it

@AndreMcHenry 4 ай бұрын

This is a display model, people.... Not a functional jet engine

@jaredcoleman5376 4 ай бұрын

@@Passionswell its a model

@alextag79 7 ай бұрын

Let's face it. For a split second we hoped it would work on kerosene!!! Another great assembly! Good boy!

@MayorMcheese12 4 ай бұрын

Fr i want a functional model! Nothing more satisfying than it actually functioning after you’ve put it together.

@saltuha 3 ай бұрын

I hoped for this until the last moment!

@aliciachapman2956 26 күн бұрын

Did u just call him good boy?

@aliciachapman2956 26 күн бұрын

Weirdo

@isaacstewart2527 7 ай бұрын

Absolutely incredible build, looks amazing

@MrSychnant 4 ай бұрын

Its a credit to the companies that put these kits on the market without knowing if they could sell enough to cover manufacturing costs. Good video too.

@wallacelarry1813 4 ай бұрын

This is only meant to be an open engine to show all working parts, when you see all the compressor blades these would all be enclosed since this is where massive pressure is built, then massive air and exhaust pressure is blasted through rear blades which turns front fan, for control of all this you would need much more electronics, and everything would be sealed, but this is so impressive for a see through working turbofan engine

@lalogreiner 4 ай бұрын

Exactly, it's about showing the principle!

@davidstorm398 13 күн бұрын

You would need jet fuel and a fuel pump and oil for the bearings and an oil pump and a ignition source and ignitors and a starter and an air source and...

@georgegregg9795 4 ай бұрын

That is very very cool. I was a mechanic at United Airlines engines. I moved all over the shop. Tear down and building. All the different engines.

@larz46north18 4 ай бұрын

ya . allison 250c20 hot end inspection Next. 👨‍🔧

@yman4918 4 ай бұрын

Ahw!!! For a minute there I thought it was going to be a real mini GE turbo fan engine. 😞 😥

@oscar90210 4 ай бұрын

Wow! You couldn’t make it easier. Thanks for sharing 🙏🏻

@leedeerman 6 ай бұрын

I’ve just had this delivered. Incredible kit. Can’t wait to build.

@barend63 26 күн бұрын

Every school science lab should have one of these.

@elliot8595 3 ай бұрын

Wow really well filmed. I did actually think it was going to fire up and actually work though.

@user-gm4bn7ql6u 6 күн бұрын

You assembled a meccano kit -- the real skill is designing and making the components

@warlordspartan 4 ай бұрын

I also built this engine it takes sometime but everything fit direction were excellent the sound is great

@tonybarnes3658 4 ай бұрын

Gorgeous model. Great to see the fan, compressor, and turbine. What a shame it runs on batteries and not kero! Love the smell of burning kero on the flightline. Bloody expensive but a lot of work in all those parts

@danielsanbsas 4 ай бұрын

¿esto es solo un modelo ? evidentemente funciona a aire pero ¿sirve para un rc ?

@danielsanbsas 4 ай бұрын

y no entendi los dos ultimos barrales que no se lo que controlan

@8kigana 4 ай бұрын

@@danielsanbsas just a stand alone model for display because if you noticed, the plastic parts wouldn't work for kerosene.

@proteusnz99 4 ай бұрын

What beautiful engineering.

@southernman523 4 ай бұрын

The best part was so badly spoilt. To listen to the engine come to life

@Zooumberg Ай бұрын

It's not a real engine. Did you see the last part he put on, the black part. That's actually a small electric motor that turns the engine and it's probably running on batteries. Did it not occur to you that he didn't put any fuel in it. You can also see a cutout in the compression chamber so you can see the blades spinning.

@landismcgauhey7217 5 ай бұрын

Great editing in particular!

@davidc9012 5 ай бұрын

FANTASTIQUE j'adore !!!! 👍👍👍👍👍👍

@sebastiansebastian20001 17 күн бұрын

Rewelacyjny model silnika. Jestem zachwycony. Uwielbiam to.😊😊😊😊😊

@raphael0208 17 күн бұрын

I think this is the coolest thing I have ever seen in my life

@5eleven 7 ай бұрын

Now we need a suitable jet for that engine🤠

@RustyInventions-wz6ir 7 ай бұрын

Wow. This engine is on another level. Good job

@trevorsmith4881 7 ай бұрын

Also $1000

@masterpooshi6031 4 ай бұрын

Why is it a good job? He didn’t build anything. He just put together the pieces. Someone else built it.

@michaelkovalenko1429 3 ай бұрын

What a beautiful video for mechanical enthusiasts! Expensive toy, but I'm thinking of buying it.

@tarestorations 7 ай бұрын

Wow ,very awesome !

@chrispowell6992 4 ай бұрын

I used to work for GE Aviation. Bravo!!!!🎉❤

@teeken8850 4 ай бұрын

That is so frinkin cool!

@patricklastname5646 3 ай бұрын

Fantastic kit!

@CarlosCastro-hg7hq 16 күн бұрын

Excellent video

@King_TuTT 4 ай бұрын

that's really friggin cool!!!

@andyl2201 5 ай бұрын

AWESOME 🤩 Engineering 👍

@alyssablacksun 5 ай бұрын

I think I'll buy it, I'm starting to like it a lot

@FIREFOX25 7 ай бұрын

Very cool u just need to find a boat engine model kit now👍👍👍

@OnerousEthic 4 ай бұрын

Wow so cool!!!

@robski39 4 ай бұрын

Beautiful

@re_ever 5 ай бұрын

Какая роскошь! 😍🤩🥰

@Bangferdiecast 7 ай бұрын

What??? This cool👏👏👏

@jean-micheldeleaz7248 5 ай бұрын

Joli assemblage 🎉

@carlo6230 4 ай бұрын

NEXT LEVEL

@crackerbarrel6965 4 ай бұрын

So it’s essentially an electric motor that shows how things spin around.

@Skyprince27 4 ай бұрын

Yes, all that machining & money and it doesn’t even burn anything; what a waste.

@crackerbarrel6965 4 ай бұрын

@@Skyprince27 That’s what I thought when seeing how precisely machined it is, all kinds of hardware to insure it’s held together correctly, then you add amperage with a cool little “throttle” and all it does is hum and spin all those parts around. Oh well, to each his own. I mean, how long at looking at blades spinning around until you’re bored and it ends up in the closet cuz I bet it wasn’t cheap either.

@Skyprince27 4 ай бұрын

@@crackerbarrel6965 Probably if you have $5000 to spend on a birthday present for your 12-year-old son or daughter who want to grow up and build jet engines, it would be just the thing.

@RGF56 4 ай бұрын

@@Skyprince27 Machining for $89 USD ? 3D printing I think 😉

@Skyprince27 4 ай бұрын

@@RGF56 It’s obviously all cast & machined aluminum and must cost about $5k

@pierremainstone-mitchell8290 5 ай бұрын

WOW! I want!

@andyroo3022 Ай бұрын

Nice model of a jet engine.

@albertoramonacosta1212 28 күн бұрын

Impresionante para fabricar tal cual casero los moldes todo muy complicado la gente hacen mas simplificado y funcionan igual obvio para proyect homemade thank Arg

@Zeromus10 7 ай бұрын

WOW!!! 😍😍👍👍👌👌

@db3100 5 ай бұрын

Inspiring

@CJ-nt4cs Ай бұрын

Was hoping to hear it spool up. Still nice video

@andyroo3022 Ай бұрын

It is a display model that just turns on an electric motor from what I can see. There are cut outs to see the compressor blades inside. It would never run with the cu touts. ( No Compression of the air fuel mixture) and has no real injectors and fuel supply.

@danomite8423 2 ай бұрын

Very cool!

@d.b.1176 4 ай бұрын

Looks cool, the poors are complaining bacause the site doesn't accept EBT.

@Sniper5354 4 ай бұрын

Without rattling, this could be a very nice desktop fan.

@ernielee6412 4 ай бұрын

Some clear silicone when putting the parts together, would keep the looseness down.

@jebbait1669 6 ай бұрын

I like this because it isn't bullshit. More of this please.

@SpamMouse Ай бұрын

A most excellent video, thank you for the upload and great editing. My first thought is would it make a good desk fan, or is the motor/bearings too noisy?

@tritiumrecords717 4 ай бұрын

I can't believe people make these, 3d printing has come so far

@tonywild1963 5 ай бұрын

All that work and no real flames. Could of bought an airfix one. Still it just shows the technology that went into building an engine

@Lewy005 5 ай бұрын

I want one of these so badly, but there’s no way I could ever spend 1k on something like this right now.

@jamessmith6162 5 ай бұрын

Absolutely, I was just saying the same thing. But what I find so disheartening, is that they make getting into these hobbies too freaking expensive.

@Thunderboid 4 ай бұрын

nice warped parts!~

@Hans_Magnusson 4 ай бұрын

I reminds me about LEGO and Meccano…! I bet me and my son set a record building the Lego mobile crane. It also comes in multiple bags, I bet a bit more affordable though 😂😂😂

@pedrodiaz5540 4 ай бұрын

¡ Outstanding !

@francisfos 2 ай бұрын

génial !!!

@judebrad 4 ай бұрын

C919 wants it's engines back!

@dabneyoffermein595 Ай бұрын

I wish they would make these with precision parts, there's a wobble in the cut-out viewing of the compressor blades section

@renaudgoudal5811 4 ай бұрын

Nice work! Ok, it’s cool to see things moving inside but I regret it’s not moving with kerosene!

@ianbrox 4 ай бұрын

Cool. It's made of Chinesium!

@MrSuniman 4 ай бұрын

Cool :)

@maheralazzawi7814 4 ай бұрын

good job

@PDZ1122 4 ай бұрын

What's with the rubber gloves??

@LG123ABC 4 ай бұрын

I was hoping that it would actually fire up. Good video though.

@blueberrymascarpone2786 5 ай бұрын

The engine of Tweety's flying birdcage🐥

@xvbt5704 5 ай бұрын

J'en assemble des vrais tous les jours 🥲

@richardgiacomo8979 19 күн бұрын

Show!!!!Quanto um kit desses????

@FisentKaka 4 ай бұрын

That noise🤩 4:00

@ocotillodavid2296 3 ай бұрын

The music is to cover the fact that the engine didnt fire. Its being turned by battery power.

@understandingmcqs6471 7 ай бұрын

I like your video and wish to assemble like you, but unfortunately it is not available in our country

@singleproppilot 4 ай бұрын

Awww. I was hoping it was an actual running engine.

@claroscesar3955 2 ай бұрын

Esta bueno presio mini

@youreale 4 ай бұрын

Nice toy.

@SkydiveHake 4 ай бұрын

Build two and make a pod racer

@bobwaterfield7222 7 ай бұрын

Very nice, WAY expensive but nice

@user-nx2bx7be7g 5 ай бұрын

Я уж думал он реально на керосине работает...

@user-yh5xy2ej3i 4 ай бұрын

Двигателя ,аксесуары, наклейки. 😮😮😮😮😮😮😮😮😮😮😮😮😮😮🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉русских не обманули, а об............ 😮😮😮😮😮😮😮😮😮😮😮😮😮

@treystephens6166 4 ай бұрын

I wish I could work with that stuff but I ain’t too bright.

@runnygames9027 4 ай бұрын

you could make that run for real if you reverse enginer the cutaway plates and make them whole

@jeremysmith2951 7 ай бұрын

Boy I was way off on guessing the part. Thought it was a model train set controller. I didn't even know they make stuff like this.

@jasonvincent1818 5 ай бұрын

Seriously cool, but $1000 for the kit?

@azrielstrife2557 6 ай бұрын

Reverse threaded hardware or flipped footage?

@winnertoujour 4 ай бұрын

you are genius you could work for many countries who's developing jet engines. you could earns millions brother

@sh3llz2 4 ай бұрын

Very cool hobby kit. I wouldnt say it was "BUILT". More like just put together, like a cool lego kit. If it was designed, 3D printed, machined, then, put together, I could CONFIDENTLY say I BUILT IT.

@scottwood2247 5 ай бұрын

So you put it together.

@user-uj3ji3ny5c 7 ай бұрын

Я так понимаю начинаем расширяться, скоро будем летать а не ездить, устанавливать так сказать, а вернее бить мировой рекорд

@desiekosaputrodesiekosaput8915 19 күн бұрын

guy...mendapatkan ini dimana & berapa harganya? guy...where did you get this & how much did it cost? Tanks

@AndyBonesSynthPro 2 ай бұрын

We have a functional mini-turbofan, that is cool in itself. So I still really need to see a legitimate miniature copy of a VTOL/ STOVL jet in action, performing vertical takeoff, thrust vector into horizontal flight using stable aerodynamic lift, then thrust vector into a controlled vertical landing. Work on a mini-Pegasus rig, or F135- LiftSystem mockup, develop a proper airframe, make a quality video of that process happening & I guarantee you will have an infamous place in history

@omarjassar4650 4 ай бұрын

Does it produce any pressure ??

@jbac5767 4 ай бұрын

Mini Pod racers. Holy shit

@testtesater 4 ай бұрын

left-hand thread?

@onestormchaser 4 ай бұрын

Where do I get one of these?

@rogerwhittle2078 5 ай бұрын

Doesn'r say what engine it is. Could be a GE90 or 100, a P|&W JT9D 7R4D, Maybe a CFM6, but it can't be a Roller. Rollers are three spool, this is two. The Trent 900 or 1000 have three spools, the centre one of which rotates counter clockwise to the inner and outer spools. Nice model though, great for instruction.