Had a proper chuckle at the start watching you fight your instinct to help the blower, even before you mentioned it lol. I would be the exact same!

Looks like a good bit of it. Cant wait to see its longevity and see a car being painted in there and see how well it does. Cheers for the video take care

I think you'll make a good photo booth as well that would do with the nice LED lighting shame it doesn't come in green lol

I've been waiting for something like this for years!!

Beauty. You displayed amazing self control whilst that last bit was inflating 😄 was clearly just caught up on itself. Looking forward to seeing you do Jimmy's car in there!

Think this will be a really sound investment and benefit the channel. I bought a large inflatable slide about the same size of your Paint booth for our kids about five years ago and it's still going strong. Puncture holes as such wont bother it as the air pump is running permanently. Looking forward to some good videos👍

That booth is an absolutely fantastic idea Marty. No wind, bugs and the over spray goes out through the filters. As a bonus even on a cool day it would be warm inside to dry the job. Perfect...😊

Brilliant. Been toying on getting the smaller booth for cycle bike resprays. These last two videos has help. Thanks 👍🏻

Great demo Martin, I am considering buying one of these spray booths to spray my RS turbo on my channel

Your a talented man Mart , I wish I could spray like that , can’t wait to see you using this more

I could see you were itching to give a helping hand😀 Great video Martin always top notch

Will probably get me one of those in the future, thanks for your review!

Martin Very cool a mobile spray booth this us a fantastic idea I love it mate Phil in stoke

good vid... Just a tip. just quickly dampen the floor with a damp rag.. this makes the overspray particles stay on the floor When your moving around, :) Its something that is done in permanent structure spray booth's too...

Wow what a great spray booth.So easy to use.All the best to you all.

Must admit I'm well impressed with that booth Martin. You was itching to help it up to 😁. Really nice spray work to. It big enough to have a party in to. Fantastic video.

Looks cracking that does, I like one of them to put pool inside to keep it cleaner for my grandson and I bet it keep water warmer aswell.

Martin I was watching a video the other day and it started raining and the roof is not waterproof I would recommend putting something on the roof just incase your in middle of a job 😀 🙂 😉 👌

Martin I had a grollia pro spray booth and I had over spray all over it only came with one blower unit and that was to blow it up I should have got the vevor one years ago of ebay was really cheap if I get another grollia pro spray booth I get a 12 extractor fan to take the fumes out used them on site for welder work 😊

Great job Martin. I think I'd open both filtering exhaust panels to normalise the air pressure inside, maybe the air pumps are designed to match inlet and exhaust, I dunno, just me banging on about stuff I know nothing about lol :)

you got a bargin there martin when you deflate it next make sure that clear plastic folds inwards with the air pipes on top think that will stop it from catching

Looks like a nice bit of kit, It will be interesting to see its longevity.

Mate it's fantastic.. you will get great use out of it

The inflation time was fast and the booth looks good 👍 Best of luck with it

looks like you made one hell of a great choice for the retro restore channel martin. although i am damn sure sure the project man will be borrowing dads property all the time lol

Hi Martin apologies on how long it's been for my small contribution to reach you but money has been extremely tight. Thank you very much for your content even the bits I wouldn't usually be interested in I watch and end up really enjoying. Keep up the good work. Ryan

That’s a fabulous bit of kit Martin, look forward to a dust free shed now

Having all the kit definitely makes life easier, looks like it will last 5+ years easy so can't grumble for that price👍

Excellent video Martin, going to be a handy booth well done.

Absolutely fantastic Martin spot on you will be able to tidy your workshop up now 👍👍👍👍

Great stuff Martin, so happy for you!

could be ran via a generator if worried about electric grid fail.. fantastic information about the booth ....love the video thankyou.....

Soon pay for itself! Lovely Jubbly!

Excellent job 👍

Enjoyed this. Thanks for sharing look forward to seeing more work carried out in your booth.

Top job mate, would of been nice to see the bumper finished though, a sound investment by the looks of it, how long to Gary uses it 😂😂😂😂

Lovely pice of kit well worth it

Great video Martin, that booth is absolutally fantastic, what a great buy, nice spray job too looked super smooth, couldnt of stopped myself pushing the top up, well done for self control lol, 👍🏻

Looks great Martin , that's a great little booth , great job , thanks Martin

I think thats a bloody fantastic find, gosh i could of done with one of them many times through out my life when working on my cars at home. Great video keep up the fantastic content, love seeing what you been up too. :-)

Always enjoy your videos martin

Turn it into Santas grotto for the kids Martin at Christmas 😂

Looks brilliant Martin seriously looking at the smaller version 👍 so I can spray my motorcycle parts

Cracking one Martin. Amazing spray booth. You are a cracking spray legend. Did say it will never go back in the bag 🤣🤣

Great product Martin,this will help you out 👍. Why don't they make one with a non return valve? This must cost a fortune in electric.Great channel

Superb bit of kit I can see you making good use out of it

good bit of kit

That’s an awesome bit of kit. Look forward to seeing more 👍👍👍

Great job Martin love watching your review love watching your wonderful videos from South Africa

Great video as usual Had me on the edge of my seat for a bit wanting to help push it up 😆

I saw a sim video from the USA ,they was spraying a car in a identical device but diff brand and it leaked in the rain , hopefully it was a one off or click bait. If you do use it rain please beware Martin. Not having a go just making you aware incase you not seen the video I'm referring to obvs they may of got a duff one or it was damaged in transit 😉

Great bit of kit that Martin, maybe a portable car lift next, or a two post lift, make working on the cars a lot easier for you, I'd happily contribute if you set up a fund me page or something, I'm sure plenty of your subscribers certainly would also 👍

Great bit of kit and it went up fast, but like you said it would go up faster if you had helped it .

Martin I have watched many videos on pop up spray booths. They all suffer from lack of light inside Otherwise they are good

If only you lived down the road from me, my Civic sits there waiting to paint.

Really nice setup Martin

Looking good that

a very good demonstration,,thankyou Martin..👍👍

Looks good buddy and plenty of room. Where are you located, as looking for someone to do my Mondeo ST bumpers in lieu of a bag of monster munch and some red pop 😁👍

Nice video Martin I quite like ur spray booth that thing will be good for different cars and jimmys bmw and that's the perfect place to respray sharons astra my st220 is resprayed soon just don't feel like doing it right now and at least the log cabin isn't going to be covered in paint anymore im learning lots of tips and tricks from ur channel thanks Martin and was that project mans mondeo bumper u were respraying

Great video could see you was absolutely dying to help it to the point of Sharon saying leave it Martin

Good job mate lovely nice and spacious top bit of kit thanks Martin

I could see how much you were itching to help it inflate, I was shouting at the screen "Leave it...........leave it!...............LEAVE IT!!!!!! and had my finger hovering over the button to pause the video just in case you gave in to temptation.😜

Great review Martin

Enjoy watching your video Martin. Can't you just. Use the other end to came in and out. Just in case you get a fly in there.

Handy bit of kit Martin I don't do a lot of spraying most stuff av done been outside or round my mate's place. Lol might blow away up here in the Highlands lol. Joking my neighbour would kill me. In all seriousness it don't look bad at all. I will send you my bumper lol or even better next time your up visting your daughter you can take it back lol. Be nice to meet up with you for a cuppa tea in cafe. Your good at the painting lol better than me anyway. 🤙👍

Hi Martin, another great video, disappointed to see you still walking on the booth when laying it out. As I said before it WILL eventually puncture if constantly walked on and I'm referring to the inflatable parts of the structure, not the walls or floor, which won't, of course, have any bearing on the booth inflating. Just a suggestion here, if you had one of those garden storage boxes, placed where you have the air pumps located, you could store the whole lot in there and keep it sheltered and out of the way, no need for straps or anything else and subsequently easy to roll out and set up. Alternatively a man of your talents could make your own storage box to put it in, just remember to fit whatever solution you choose with a lock so you can keep Project Man out. 🤣

Good stuff Martin, I like it.

Thats a hell of a thing that , anyway is anyones that nervous about power outs , have a genny on standby.

Would be decent for detailing in the winter

If you cracked the zip into the main entrance, air could have got in and helped the tent/booth inflate

You seem to be genuinely happy with your new booth! I bet we are going to see a lot of you in there. One question that comes up whenever I see you doing these kind of paint jobs. Do you have to clean the gun in between coats? You mentioned that you apply the second coat 10 minutes after the first one. Does the gun get clogged if you leave it for that long? Cheers and keep your videos coming.

Great Vid Martin 👍

Sharon can turn it into a tanning booth 👍

Another awesome videos mate just a heads up ifollow someone on KZfaq called beyond the van life he uses one of these spray boots he has a shoe once with a van going off grass into the spray booth where are wheel span and tried pulling the floor up underneath the Axel. Keep up the good work mate can't wait to see when you spray a car in the Booth😀😎

That’s way more quiet in real life than it appears on film Martin and I think I know why. KZfaq when you upload videos heavily compresses music and compressing music makes it much louder than it would be in real life, it also makes it sound harsher. Very impressed how quiet it actually is.

Imagine spraying a car and then the wife unplugs the fans!! But looks good, I refurbed some wheels and made a right mess of my garage, so can imagine how doing more spraying would not be good fir your garage and tools etc.

Awesome job well presented 👍🏻top marks

Looks great so far

Brilliant man ❤️👀👍😎

Bloody hell Martin I was willing you to help it up, Use Vevor for Invertors and Motors they are quality products

Quality that Martin , nice investment mate

Great video Martin.

Great videos mart but I’d rather listen to you sing then the background music I thought I was on hold to sky I went to press 1 keep up great work been waiting patiently for the trotter van since u first posted on it get goin with it will double ya views aka Paul foreskin

good job man,love the booth just painted my car and would have been better with your booth,,thanks

Great Vid, thanks

Great video martin could a vac help with deflating just a thought Nice one

I would be worried about the electric bills. More so when you are using the oven for powder coating.

Nice clean job 👌 👍

Great demonstration Martin. May I ask where you get your water based , Base coats from ?

Nice thing that is Martin. Power cuts my arse. What if the world ends too lol

Looks good. I will order one

I think this is the first time I've ever seen Martin almost biting his nails, kind of worried in case by not helping the spray booth up it might get damaged. Luckily it didn't.

Looks like you're going to blow a hot air balloon up Martin

Looking to get one for my small shop and spray lacquer. How are the fumes? Does the ventilation work well?

Hi Martin could you use a heater in the the booth .

Hit that like button 👍💯👍

Hi Martin, regarding the deflation questions. Is it possible to install check valves inline with the pumps. As you said its not going to be a permanent fixture so probably not necessary anyway. Great video thank you

Martin does it produce any static because static is a paint sprayers enemy

Decent that 👌