So I tried to leave more than one thumbs up for the video however it wouldn’t let me 😁 Beautiful model and a great build. One of my favorites to rewatch. 👍👍👍👍👍👍

When I was about sixteen (1966), my older sister asked me what I wanted for a Christmas present. I said I wanted the Shackleton model made by 'Frog'. When she got to the shop, she told the salesman she wanted a model for her brother. When he asked which one, she forgot the 'Shackleton' bit and just asked for a 'Frog'. Miraculously. the correct information got through in the end.

As a teenager we used to go on holiday near RAF St. Mawgan in Cornwall, where Shackletons were based until the Nimrods came along - fantastic planes that made an even better noise! Fantastic model, love it.

I love hard work. I can watch it for hours. Lovely result.

Stunning. The attention to detail is amazing and I like the fact that you narrate your builds. Lots of other modellers put a music soundtrack on them which makes it a bit impersonal.

That's one of the loveliest model aircraft I've ever seen. She's a beauty!

Great build Greg. Love the reserved weathering you went with and the colours. Your videos move along nicely…

Wow! Beautiful Shak, Greg.

That is a lovely looking aeroplane 👍

Lovely stuff. It’s a beautiful build. I really like the subtle weathering which really concentrates you on the flawless finish. It all comes together into something stunning 👍

It's absolutely smashing Greg. I was on 8 Sqn in 1976, my first posting as an LAC Rigger. On Doomwatch, we had 12 of these wing tip to wingtip on the line at Lossie. Lovely Job and a great video.

My compliments Sir, the attention to detail here is fantastic. Thank you for sharing !

I hope you kept it in the end. It looked great. I'm learning a lot from watching your channel, cheers 🍻

Always a pleasure to watch you work, and listen to your sardonic comments 😃 My Dad was stationed in Aden in the mid 60s where many Shackletons were stationed dealing with the rebels, so very nice to see this beast come together. 👍

The “Bomb bay doors” sounds like a great Indian restaurant. Going to order a Jalfrezi tonight …..

Really great build Greg. You gotta love the Shack and I think Revell have done a decent job. Thank you for sharing your build. 👍

Beautiful, as usual. The complex shapes of this bird are unmatched. What a beast

Lovely looking Shackleton Gregg. Really enjoy your style of presentation and sense of humour !

Great build and I really liked your weathering technique. Really well done and explained.

great job! You make it look so easy building kits!

Just found your channel and binged watch all your videos! Love your style of modelling and the way you present them to us veiwers. Youve inspired me to get back to the hobby, thank you!

Amazing results as always. Great job 👏🏻

Tremendous work again.. your attention to detail and execution of techniques is second to none. Thankyou for sharing your talents. Take care

Very nice job and well presented. You make it look so easy ..I have been after doing this kit for some time . after seeing your build .I may just follow your lead ...thanks for sharing ...

Lovely job. Like the way you finished off parts before assembling the whole thing.

Very interesting subject 👍. Your build turned out great 🏆.

One of my favorite airplanes, masterfully done!

That's a beautiful build and the paint is a joy!

Klasse! Super realistisch und perfekt ausgearbeitet.👍

I hate you , nothing personal , but you show me the amateur nature of my efforts ! Brilliant way to spend 33 minutes , and the end effect is wonderful.

Stunning build mate. Thank you.

Hi Greg another great build I've got this in my stash & looks the part great colours and nice light weathering makes the finish spot on many thank for sharing stay safe jon

Not weathering too much, nore adding artificial contrast, is a good and honest thing. Beautifull kit once displayed. Didactic and calm video as usual. Good job Greg!

Wow!! I wish I could do even half of what you did on my models.

Excellent build. Thank you.

Beautiful work . . .

Awesome as usual mate. I’ve got this one and the Revell MR 3 in the stash.. if mines turn out even half as good as this I’ll be over the moon! 😂

That is a real beauty Greg thank you very much for dragging it out the stash why we don't have one in flying condition is beyond me . A real treat thanks again . Regards Gav.

Another great build , very impressive 😍👏👍

Looking very chilled in the opening shot there Greg. 😂 Great build and technique with the wingtip lights.

Nice work Greg, looks great.

A Well done job . Looks great . Saw one of these in real life it was a mighty plane.

Stirling work, eight props and twenty thousand rivets in close formation. 👍

I know that I wrote many comments last days below Your videos, but I must make another one. I must learn most of Your techniques, which appears great. Your models are one of the best I've ever seen on KZfaq. All the best for You! ;)

Great Build thanks for posting !

Another great build!

Brilliant job, I like that 👌

A great job, looks superb 👌

Stunning build 👏👍

A very great job.... Compliments! 🤩

Wow, Greg... I really like this one. The wash you used looks like it worked really well. The color scheme is great, and the markings add just the right amount of color. Well done, and great video!

Very nice build. 👍🏼

The camera angle in the opening. Looks like your trying to escape a spider on the floor. 🤠

Nice build m8..I'm just old enough to see one of these fly in Scotland.

Caught your comment on the masking fluid. Try putting a small piece of tape underneath. Makes removing it much easier. Nice build Greg, catch you on the next one.

Very impressive result Greg. A bit of double sided tape on the modeling mat is great for preventing the loss of very small parts, such as the navigation lights, prior to assembly.

Great work no doubt 🍻 Cheers from North Carolina

Wonderful build. Thank you so much for sharing. Loved how all the surface detail came to life with the panel wash. Superb. I like to build old Frog and Airfix kits, and I find that Tamiya Extra Thin sometimes fogs the clear parts. Does anyone else experience this or have any advice? Once again thank for the superb work you show us here.

Great build Greg 😎👍

I think you have really got this model right and a good video and build. I remember seeing Shackleton's at air displays many years ago and being told they were named after Magic Roundabout characters. I think one I saw was called Mr Rusty - not a good name for an aircraft - more like Mr Corroded. The last two I saw were about 20 years ago at the museum at the end of the runway at Gatwick, one was capable of ground running.

Amazing work man, wish I could make my models look like this! Subbed.

Outstanding work Sir! I wish someone made this in 1/48...

Stunning as usual 👍👍👍👍

Very nice looks superb

Hi Greg, that was a absolutely outstanding build, it's a pity there were some fit or part issues, I think these days of kit manufacturing this should not be the case, keep safe and well mate, best regards from a Kiwi living in Australia

Looks like a Shakleton to me too Greg. Very nice.

Your Shack turned out beautifully.

Brilliant, as usual. 👍

Nice one Greg, I've got this kit and really looking forward to building it, a few years ago I got a commission job to build one of these planes but these kits were not available so I had to convert an old Frog MK3 into an AEW2 Oh boy what job that was! (Side note, The plane is in the manchester science museum and the model with the pilot)

In the 70s, I shared a flat with a guy who did Quality Control for Revell in Potters Bar: paid to make model kits all day! He used to bring home the plastic 'overflow' (whatever) from the machines, multicoloured irregular plastic sculptures , very arty. Jon Price, are you out there?!

TY for the post. I subscribed.

Love it! 🥰😍😎

Another stunner.

Very nice!

Great build, saw one of these beasts fly over my house when I was a wee boy, in my youthful ignorance thought it was a B24, It was only years later I found out the truth!

Great build. Pity there was no bomb bay content with the kit. Revell kits always seem to be seen as a lower level than competitors but this looks like a very good kit. 👍

Finally got this kit a few months back nice details but more flash than Gordon!!!! On the plus side I did get two sets of glazing

Excellent.......!

Splendida realizzazione!

As we used to say in the RAF re the Shackleton; 20,000 rivets flying in loose formation ….😂

Great Art Work! No Pilots? With clear head ;-) A great build the clear 262! THANK YOU

Couldn't agree more, there is nothing worse than glue on your shiny bits 😊

Amazing!!!!!!!!!!!!

Bravo , très belle maquette ...

'de-bagged' meant something very different in my day, and nobody complimented me on my surface detail

Nice !

I had this very patch,8 screws to 4 blow job's from 8sqdn when they were stationed at Lossiemouth back in 84.

Fantastic

I built the airfix kit and wish I'd masked the prop tips. I used the décals but got severe case of can't be arsed itis and didn't bother doing them all. It's hanging up and looks great other than my son always points them out. Might have to do something about it one day... He's now building a Revell Top Gun F14 which is kit-shithousery on the Tamiya Sea Harrier level. They've got a bloody cheek charging £30odd quid for it...

I debated for a while if I wanted this kit or the one from Airfix... Finally I went for the MR2. Airfix, that is... The radar dome gives this one a lot of character, though. And it's looking good despite the accuracy rumors. :-) Not so sure about the question in the thumbnail... You have to show us the other one too! ;-)

Saw a Shackleton flying at Duxford and a wreck one at Nicosia Airport

There was a Shackleton at Long Marston airfield.

Hi Greg, great model build. I have recently purchased the Airfix version. I haven’t built a model with such detail such as panel wash and oil staining, so this will be a first for me but it’s a project I’m planning on using to escape to my garage with and escape the kids. I just wondered if there was a reason for not adding a final varnish sealant? Would this interfere with the oil wash and panel grease effect that you built up or was it just personal choice in the end? Much appreciated. Jim.

Another great build 😎, what grit sanding sponge do you use to prep for decals please?

Nice work Greg ! she's beautiful .I remember building one of these , I think it was Revell , and it was covered in huge rivets ( you could have used it for a sanding stick .), so was a mess to paint and even worse to decal . Is this a new mold ??

Awesome build and a wonderful result. Did the kit contains any of the weapons carried by this aircraft?

great build Greg. I noticed the bomb bay is very similar to that of the Lancaster?

It looks like a Shackleton to me and yes its another great model Greg, I used to like watching them fly when I was in the ATC back in the early 80's, it was a great aircraft and another of the RAF workhorses. Like you with this model I'm getting a little frustrated trying to convert a Revell 1.48 USAF B24D into an RAF Coastal Command Liberator Mk 3a. What would you recommend to do with the raised panel lines in the model? I'm building it as a tribute to my great uncle who was 224sqn's Bombing Leader during WW2. Serving as an Observer with RAF Coastal Command and he lost his life in a flying accident on 30.10.1942. When their a/c hit a barrage balloon whilst attempting an emergency landing near Plymouth.

Hi, I’m reasonably new to modeling ( about 2 and a bit years now). I ’m just wandering what paint brushes you use for detail, like the ones you used on the pilots in a buefighter video. Thanks 😊

Another stunning build, Greg. I noticed that you used Vallejo putty and is something I've been wanting to try but have been put off by reviews of it. How do you find using it, is it something you can recommend?