I recently completed the hasegawa 1/32 bf-109g6 and used my galaxy tools to rivet the model and it looks so much better than an unriveted kit, I'm with you on this one, rivets are better than a plain surface, great demonstration, clear consice and to the point...
@thescalemodellingcafe Жыл бұрын
In that scale I'd say riveting is pretty much essential!
@garritopor37rus6 ай бұрын
@@thescalemodellingcafe ? А по русски
@clra73 Жыл бұрын
Thanks for this interesting review, Jamie; it seems like an excellent alternative for the RB ones I love; Galaxy also has the corner wheels that are very useful for tight spaces.
@thescalemodellingcafe Жыл бұрын
I'm going to order those corner ones too Carlos, and the bigger wheels.
@FinsburyPhil Жыл бұрын
Thanks Jamie, I've been trying to find a Rosie/RB set for ages. Just got these in - they look well made
@thescalemodellingcafe Жыл бұрын
They are very good mate
@ThatMofoDamon Жыл бұрын
Nice tool review and demonstration Jamie! This should help you a lot for adding detail in your aircaft builds! Thanks for sharing, take care and keep upp the good work sir.
@thescalemodellingcafe Жыл бұрын
Thanks mate
@petermossong4287 Жыл бұрын
Hi Jamie. After watching your review of the Galaxy rivet tool, I have ordered and received one via Aliexpress in China. Until now I have been using Radu's otherwise excellent riveter sets but always found them to be a bit flimsy! After spending much of today having a play with the various wheels and segment tools, the Galaxy tool is far superior in that regard. I generally use them to faintly mark out the rivet lines for spacing, then use a beading tool to make the actual rivet indentation (or Dzus fasteners). Hopefully I'll meet up with you next year at Telford, plagues and pandemics permitting!
@thescalemodellingcafe Жыл бұрын
Hi Peter, great too hear from you again, it's been a very long time. I also do the same for Dzus fasteners! I'm not sure I'll be able to make Telford for quite a long time owing to the job out here in Saudi, if I can get there it would be great to meet up mate.
@kitbuster Жыл бұрын
Great review Jamie, if it’s good enough for you it’s good enough for me, I’ve been trying to buy a set of Rosie riveters for about 2 years without success, ended up with the Revell rivet wheel and it’s hopeless , a set of these have been ordered 👍👍
@thescalemodellingcafe Жыл бұрын
Nice one mate, glad you found it useful.
@MrKuncol Жыл бұрын
Rosie was produced by Petr Dousek who passed away last year. I wouldn't expect them in any shop in the future.
@johnkelly2098 Жыл бұрын
Good demo, Jamie. Thanks. Something else in a handy packet of three eh?
@ZinzanModelling Жыл бұрын
Dear Jamie, A good video on the Galaxy riveter. I have this one. Subbed your channel which has good content! Regards, Z
@thescalemodellingcafe Жыл бұрын
Thank you mate
@marksayers8867 Жыл бұрын
Did you know that BAC used to employ a team of dwarfs to rivet aircraft wings from the inside . So much for H and S in the good old days ,similar to using kids to sweep Victorian chimneys !
@thescalemodellingcafe Жыл бұрын
I did not know that Mark!
@stephenashley84315 ай бұрын
I have a Hasegawa F-15E in 1/72 that needs that tool BAD !!!
@thescalemodellingcafe5 ай бұрын
That'll make a big difference
@scottorton4824 ай бұрын
Hello Jamie, im scotty from the USA. Im impressed by your work. I have yet to become a rivit counter, but i like the results. If you wouldn't mind, what are the best brands to purchase and where do i get them? Id like to get the results that you have gotten. Your help would be greatly appreciated. Thank you so much for your video.🙂
@thescalemodellingcafe3 ай бұрын
Hi Scotty. I'd get these Galaxy tools, I got mine off eBay. Hope that helps.
@fookyloh49959 ай бұрын
Following on my earlier question, Galaxy have also come up with a razor which is very similar to the one from JLC. Wonder if you will do a comparison video of the two.
@thescalemodellingcafe9 ай бұрын
If I can get one I'll see what I can do mate.
@Spans-ij8zbАй бұрын
Hi,im building zvezda su57 1/48.Which size good for this scale model? Mostly i build 1/48 and 1/72 scale.
@thescalemodellingcafeАй бұрын
I'd get a selection and then you can choose which looks best.
@jfm148 Жыл бұрын
Another useful video, Jamie. Sometimes it was hard for me to see. It seems you were working off camera... Nevertheless, good to see you using this tool. What sets you advise for 1/72 and 1/48 kits? Best regards from Guatemala.
@thescalemodellingcafe Жыл бұрын
Hi Juan. I'm still learning mate, I think I was zoomed in too much at times. Hopefully the quality of videos will improve as I learn more and more. As for the size v scale, I reckon around 0.65 is good for 1:48, maybe 0.4 for 1:72.
@jfm148 Жыл бұрын
@@thescalemodellingcafe Thank you Jamie, we will look for those sets on eBay...
@gary6300 Жыл бұрын
Hi Jamie, great review and showing us how to use it what size would you recommend for 1/48 and 1/32. as i would like to buy one of these tools cheers Gary 🇬🇧
@ModelkitStuff Жыл бұрын
Nice review cheers
@thescalemodellingcafe Жыл бұрын
Thanks mate, glad you liked it
@fookyloh49959 ай бұрын
Thanks Jamie for the detailed explanation and demo. I am trying to order a set on ebay but i am not sure which handle I should buy, 4 different coloured handles are shown. I reckon the colour of the handle doesn't matter, does it?
@thescalemodellingcafe9 ай бұрын
No idea I'm afraid?
@garritopor37rus6 ай бұрын
Так это от Ан-2 крыло?крыло обтянуто перкалем с эмалитом, металлические только капоты баков и предкрылки👆
@thescalemodellingcafe6 ай бұрын
Yes
@BarkingSpyda Жыл бұрын
Petr Dousek, known for 'Rosie The Riveter' tools sadly passed away in 2021. RIP Petr
@thescalemodellingcafe Жыл бұрын
Thant's very sad. 😪
@stephenashley84315 ай бұрын
Where can I buy it and how much does it cost ??
@thescalemodellingcafe5 ай бұрын
I got mine from EBay, just put Galaxy rivet in the search. The cost is very reasonable but it depends which sets you go for.
@gavinbooth Жыл бұрын
Worth a punt then cheers marra . Regards Gav.
@thescalemodellingcafe Жыл бұрын
Defo Gav
@michaelleesmith5903 Жыл бұрын
Great video Jamie, just discovered it. I hope you’re enjoying your holiday. I know you talked about it at some point in the video but after viewing the whole thing I tried to go back and pinpoint the moment when you discussed standard versus mini wheels and I just couldn’t find it so I wanted to ask which you would recommend for mostly 148 scale work? I’ll be buying the 0.55 and 0.65 and 0.75 set. Thanks
@thescalemodellingcafe Жыл бұрын
Thanks Michael. The basic rule is bigger the number, the smaller the scale.
@michaelleesmith5903 Жыл бұрын
@@thescalemodellingcafe I understand that what I'm asking about is Galaxy sells MINI Wheels in all the sizes and it also sell standard Wheels. I noticed you were using the mini Wheels and just curious if you think that's the best choice because I can only afford to buy one set right now thank you so much
@thescalemodellingcafe Жыл бұрын
@@michaelleesmith5903 , I chose the mini ones as I thought they may be more versatile?
@wasrio1403 Жыл бұрын
Tha ka for the review. Doesn't thr rosie tool have different size teeth for each scale? Rather than just different spacing.
@thescalemodellingcafe Жыл бұрын
The size of the wheel makes no difference other than it's easier to get freehand straight lines with a bigger wheel. The spacing of the teeth sets the scale.
@lewistaylor1965 Жыл бұрын
I used a riveting tool on my 1/32 Revell Beaufighter...It's an old kit and took a couple weeks to rivet but it looked great before I sprayed it...(I made a video of the build on my channel)...and then I sprayed it with the airbrush and lost all the rivet detail...The panel scribes were still visible but it really put me off riveting old kits...I'm trying it again on the old Revell 1/32 P38 kit at the moment...From some vids I've watched they say to sand after riveting, clean and then drop extra thin in there which I did and they were still visible but I lost the lot after a couple coats of spray paint...Any ideas?
@thescalemodellingcafe Жыл бұрын
I don't sand the rivets most of the time, if I do I just polish them with a very well worn, fine sanding sponge. I never us cement on them. The paint I use are lacquers so they have very fine pigment, and I always use light thin coats.
@lewistaylor1965 Жыл бұрын
@@thescalemodellingcafe Brilliant...that's what I wanted to know...Thank you for the reply...I'll try that on the P38 I'm building...I've done the cockpit so now onto rivets and panel lines...Big thanks and great videos...Lew
@catlady8324 Жыл бұрын
Do the “Sizes” or “Pitch spacing” generally go by scale? I’m mostly working with 1/32 scale WWII aircraft. 0.55, 0.65, 0.75 is OK for 1/32 scale, probably using the 0.75mm most frequently?
@catlady8324 Жыл бұрын
I measured two models’ at 10 rivets per CM. As a “Yank” I figure that to be 100 rivets per mm. 🇺🇸
@thescalemodellingcafe Жыл бұрын
The advantage of the Galaxy sets is you get 3 in a box so they are flexible. I tend to use 0.65mm for 1:48 so anything bigger should do 1:32
@lucferrari3109 Жыл бұрын
No need for light sanding after rivetting ?
@thescalemodellingcafe Жыл бұрын
Depends on how soft the plastic is, and the scale. It's not needed on this 1:48 Hobby Boss Colt, but on 1:72 I think I possibly would. I didn't on the Arma Wildcat but that had raised rivets.
@robertmunoz7543 Жыл бұрын
Wheel reinventing?🤣 Jman
@thescalemodellingcafe Жыл бұрын
😄
@MrJ027 Жыл бұрын
I know that model is a what if but where do you get your references for real projects or do you just wing it??
@thescalemodellingcafe Жыл бұрын
I have some books, the Valiant Wings and Kagero are normally very good. Other than that, Google is your friend.
@tompotter9064 Жыл бұрын
Very interesting, where can I get them?
@thescalemodellingcafe Жыл бұрын
Quite a few places in the UK mate, including eBay and Amazon. A quick Google search will start you off in the right direction.